Blodgett 40E-BLP Datasheet

Blodgett
Brand
Blodgett
Model
40E-BLP
Category
Cookers
Type
Datasheet

This manual is also suitable for

Blodgett 40E-BLP is an electric braising pan with a 40-gallon capacity and a power tilt feature. It's constructed of heavy-duty 304 stainless steel with a 5/8” thick cooking surface, ensuring even heat distribution and preventing warping or distortion. The pan's 100 grit interior finish minimizes food sticking and burning, while the fully adjustable one-piece cover with a torsion bar counterbalance maintains the selected cover position. The smooth-action, motorized tilt mechanism allows for precise control during tilting and easy cleaning.

Blodgett 40E-BLP is an electric braising pan with a 40-gallon capacity and a power tilt feature. It's constructed of heavy-duty 304 stainless steel with a 5/8” thick cooking surface, ensuring even heat distribution and preventing warping or distortion. The pan's 100 grit interior finish minimizes food sticking and burning, while the fully adjustable one-piece cover with a torsion bar counterbalance maintains the selected cover position. The smooth-action, motorized tilt mechanism allows for precise control during tilting and easy cleaning.

Project
Item No.
Quantity
Model 30E-BLP (30 gallon, narrow width, electric braising pan with
power tilt)
Model 40E-BLP (40 gallon, narrow width, electric braising pan with
power tilt)
CONSTRUCTION
304 stainless steel
Pan is heavy duty, 10” deep, one piece welded construction
5/8” thick stainless steel cooking surface prevents warping or distortion
Flat bar electric heating elements ensure efficient heat transfer across
the entire cooking surface
Control and tilt mechanism are mounted in stainless steel housings on
the pan body sides
100 grit interior finish is coarse enough to retain butter, shortening or oil
during the cooking process, minimizing food sticking and burning
A heavy-gauge, fully adjustable one-piece cover is standard with tor-
sion bar type counterbalance designed to maintain selected cover posi-
tion.
True rounded leg tubular stand design and 3” radius pan interiors make
cleaning easier.
OPERATION
Smooth action, quick tilting body with motorized crank tilt mechanism
provides precise control during tilting
Powerful reversing DC motor is activated by a 3 position control switch
Pan tilts past vertical for easy cleaning
Controls allow operation at a 7 degree angle to facilitate griddling.
Thermostatically controlled for automatic shut-off when desired temper-
ature is reached or heating when temperature falls below desired set-
ting
High limit thermostat for safety
Console mounted power switch with indicator light
Control includes a heat indicator light, temperature control switch and
motor tilt switch
A vent in the cover top regulates condensate buildup and a rear con-
densate drip shield is located under the cover to prevent condensate
from dripping on floor when cover is opened.
STANDARD FEATURES
Mounting bracket for either right, left or rear faucet mounting
Etched markings (specify)
Gallons
Litres
Standard voltage options (all units are field convertible to 1 phase)
208 VAC, 3 phase, 60 Hz
240 VAC, 3 phase, 60 Hz
480 VAC, 3 phase, 60 Hz
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Faucets
Single pantry faucet
Double pantry faucet
Spray hose assembly for panty faucets
48” (1219 mm)
60” (1524 mm)
Steam pan insert
Steam pan carrier
2” tangent drawoff (must be ordered with unit)
Strainer for tangent drawoff valve
Pouring lip strainer
Flanged feet
Casters
E-BLP
Electric Floor Model Braising Pan with
Power Tilt
E-BLP BRAISING PAN WITH POWER TILT
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
E-BLP ELECTRIC BRAISING PAN
WITH POWER TILT
SHORT FORM SPECIFICATIONS
Provide Blodgett model 30E-BLP, 30 gallon (114 litre) or 40E-BLP (152 litre) electrical braising pan. Unit shall be stainless steel, electric-heated, thermostatically controlled, on a rounded
tubular leg stand. Heavy 5/8” thick stainless steel clad pan bottom with clamped-on flat bar-type electric heating elements. 30 gallon pan is 39” wide and 40 gallon pan is 48” wide both
with a 10” deep pan. Smooth-action, motorized tilt mechanism, heavy-duty fully adjustable counterbalanced cover with condensate drip shield and cover vent. Single electric connection
required; specify voltage (208, 240 or 480 Volt). UL- and NSF- listed. Made in USA. One year parts and labor warranty. Provide options and accessories as indicated.
POWER CONNECTION:
Refer to data plate.
SHIPPING INFORMATION:
Approx. Weight:
30E-BLP 463 lbs. (210 kg)
40E-BLP 535 lbs. (243 kg)
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice.
Access Panel
RIGHT SIDE VIEW
3
Full Tilt
Position
Pour Path
Cover Open
70.3
[1786]
Pan I.D.
28.25 [718]
31.90
[810]
.75 [19] Min.
2.0 [51] Max.
9.9 [250]
Pour Path Max.
46.0 [660]
Pour Path
Min. 25.0 [635]
34.38 [873]
1.8 [46]
25.7 [653]
Electrical
Connection
Finished
Floor
FRONT VIEW
Adjustable Feet
L
C
L
C
10.00 [254]
Inside Pan
Depth
43.3
[1100]
37
[940]
26.28
[668]
5.42 [138]
B
Faucet
TOP VIEW
Cover Vent
3
5
21.5
[546]
3.4 [86]
39.75
[1010]
3.4 [86]
C
A Pan I.D.
5.25 [133]
Electrical Connection
Faucet
(Optional Location)
Faucet
Optional Location
(2 Places)
NOTES:
1. Dimensions are in Inches [mm]
2. Casters or flanged feet available at an extra cost.
3. Electrical Connection: 0.1.75" dia. [44] hole
4. Other voltages and phases are available.
5. Faucet bracket may be installed on left or right side.
6. Faucet may be installed on faucet bracket or on rear as shown.
TOP VIEW BRAISING PANTOP VIEW BRAISING PAN
Pouring
Lip
Location of Optional
2" Tangent Drawoff
11
[279]
8 [203]
D
C
L
APPROVAL/STAMP
P/N S00108 Rev B (4/11)
MODEL A B C D
30E-BLP 26.25 (667) 32 (813) 38.5 (984) 8.75 (222)
40E-BLP 35.75 (908) 41.5 (1054) 48 (1226) 13.5 (343)
AMPS PER LINE
Model kW Phase 208V 240V 480V
30E-BLP 11.5 kW
1 55 48 n/a
3 32 28 14
40E-BLP 15.3 kW
1 74 64 n/a
3 43 37 19
  • Page 1 1
  • Page 2 2

Blodgett 40E-BLP Datasheet

Blodgett
Brand
Blodgett
Model
40E-BLP
Category
Cookers
Type
Datasheet
This manual is also suitable for

Blodgett 40E-BLP is an electric braising pan with a 40-gallon capacity and a power tilt feature. It's constructed of heavy-duty 304 stainless steel with a 5/8” thick cooking surface, ensuring even heat distribution and preventing warping or distortion. The pan's 100 grit interior finish minimizes food sticking and burning, while the fully adjustable one-piece cover with a torsion bar counterbalance maintains the selected cover position. The smooth-action, motorized tilt mechanism allows for precise control during tilting and easy cleaning.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents