DeVilbiss DeKups® Adapters Service Instruction

Brand
DeVilbiss
Model
DeKups® Adapters
Type
Service Instruction
1. Install insert on screw until
knurled groove end is flush.
Service Instruction
SI-4-39-24
DeKupS
®
803237/DpC-501
ADApter for SAtA
®
qCC full Size
inStAllAtion inStruCtionS
10/08 ©Copyright 2008, DeVilbiss Printed in Taiwan
SATA is a registered trademark of SATA.
2. Place Insert with screw into
gun.
3. Lightly tap into gun until insert hits
bottom of gun hole. The soft brass
insert will not damage gun.
5. Tighten adapter tightly to expand
insert and seal fluid path.
4. Remove screw.
1. Place screw* thru box end
wrench. Install screw partially
into gun's adapter insert.
*7/16–20x1¼ long
2. Use second wrench to tighten
screw against first wrench.
This method will pull insert out
of the gun.
3. Remove insert with screw.
The gun will not be damaged.
ADApter inSert reMoVAl inStruCtionS
Knurled end
flush with
assembly screw
Insert shown at
bottom of hole
Soft brass
insert will
not damage
gun.
Patent 7,354,074
  • Page 1 1

DeVilbiss DeKups® Adapters Service Instruction

Brand
DeVilbiss
Model
DeKups® Adapters
Type
Service Instruction
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents