DeVilbiss DeKups® Adapters Service Instruction

Brand
DeVilbiss
Model
DeKups® Adapters
Type
Service Instruction
Service Instruction
SI-4-39-30
Replaces SI-4-39-30
DeKUPS
®
DiSPoSable Paint CUP aDaPter
Kit (DPC-502) for Sata
®
Mini-Jet
®
Fits Sata
®
Mini-Jet
®
Quick Change or Threaded Cup spray guns
Parts included: DeKUPS
®
Adapter, #8-32 x 1/4” set screw,
5/64” hex L-key wrench, and locking collar.
11/11 ©Copyright 2011, DeVilbiss
1. Place locking collar with set
screw onto adapter.
Sata
®
, Mini-Jet
®
are registered trademarks of
Sata Farbsprtiztechnik GmBH & Co.)
2. Place the adapter with the
collar onto spray gun. Be
careful to properly align the
cutout in the collar with the
spray gun hook.
3. Using an 11/16” open end
wrench, install the adapter
by engaging the quick
change tabs.
4. Tighten the set screw on the
collar to prevent the adapter
from disengaging.
Using an 11/16 wrench, install
the adapter (without the collar)
tightly into the spray gun.
Threaded Cup spray gun
installation:
Sata
®
Mini-Jet
®
Quick Change spray gun installation:
Align the cutout in the collar
with the spray gun hook
L-key wrench
Wrench
  • Page 1 1

DeVilbiss DeKups® Adapters Service Instruction

Brand
DeVilbiss
Model
DeKups® Adapters
Type
Service Instruction
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents