Commax CDL-800WL Owner's manual

Brand: Commax

Model: CDL-800WL

Type: Owner's manual

PH M4 X 30 4EA

PH M4 X 6 3EA

FH 4 X 20 4EA

Screw components

Outdoor body

Indoor plate

Indoor body

Assembly Diagram

CDL-800WL EN

ED. 00

1. Install Mortise

PH M4 X 30

Please connect the cables in

line with each color.

6. Install Stricker

5. Connect indoor and

outdoor body

PH M4 X 6

OUT

2. Install handle shaft

3. Position indoor and outdoor body

4. . Connect cable

* Please press button in the order below

if the number plate is shown inside out

after installation.

①[Registration] button in inner side

②[Start] button in outer side

③[Registration] button in inner side

※Setting of direction of handle

Check point

1) Check whether to lock automatically.

- If the door is not normally locked, please check auto-lock setting.

2) Check if Automatic/Manual lock works properly.

3) After registering the fingerprint/smartkey, confirm that the door is open

with the fingerprint/smartkey registered.

4) Explain sufficiently to customers about registration of

Fingerprint/smart key, password change.

5) Check if the door with the password registered is open.

- The password must be registered directly by customer.

6) Explain the internal double lock.

7) Explain battery replacement timing and emergency power supply.

8) Surely, deliver the warranty certificate and instruction manual that you

have written exactly to customer.

Caution

Please insert batteries with the door open at installation.

CDL-800WL

FH M4 X 20

Inner side

Outter side

Caution

[When mortise is viewed from above]

(O)

(X)

Inner side

Outter side

Inner side

Outter side

Commax CDL-800WL Owner's manual

Commax CDL-800WL Owner's manual

Commax CDL-800WL Owner's manual

Related papers

Other documents