1. Collapse the hose with your fingers and remove the
hose connector that is being replaced.
2. With the end of the hose still collapsed,
slide the new hose connector onto the hose. Make
sure only the first corrugation of hose
is inside the lip of the connector.
3. Stick your finger inside the hose and pop
it back into shape.
Polaris Hose Connector
Replacement Instructions
Collapse Here
Insert
to Here
Hose
Connector
© 2014 Zodiac Pool Systems, Inc. All rights reserved. Polaris
®
and the Polaris 3-wheeled
cleaner design are registered trademarks of Zodiac Pool Systems, Inc.
All other trademarks referenced herein are the property of their respective owners.
TL-1013 Rev B
Zodiac Pool Systems, Inc.
2620 Commerce Way, Vista, CA 92081
1.800.822.7933 | www.polarispool.com
