Polaris Vac-Sweep 280 Operating instructions

1. Collapse the hose with your fingers and remove the

hose connector that is being replaced.

2. With the end of the hose still collapsed,

slide the new hose connector onto the hose. Make

sure only the first corrugation of hose

is inside the lip of the connector.

3. Stick your finger inside the hose and pop

it back into shape.

Polaris Hose Connector

Replacement Instructions

Collapse Here

Insert

to Here

Hose

Connector

and the Polaris 3-wheeled

cleaner design are registered trademarks of Zodiac Pool Systems, Inc.

All other trademarks referenced herein are the property of their respective owners.

TL-1013 Rev B

Zodiac Pool Systems, Inc.

2620 Commerce Way, Vista, CA 92081

1.800.822.7933 | www.polarispool.com

This manual is also suitable for

Download PDF