Epson V11H707020 User manual

Brand: Epson

Model: V11H707020

Category: Data projectors

Type: User manual

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User’s Guide.

Connect the projector

Choose from the following connections. See the sections below or the online

User’s Guide for details.

Video device

Connect multiple video devices and use the Source button on the projector or

one of the source buttons on the remote control to switch between them.

HDMI cable

RCA video cable

Mobile media device

Connect tablets, smartphones, and other devices that support the MHL

™

standard to the HDMI1 MHL port.

MHL cable

Some devices may require an adapter or may not require an MHL cable. Not all

features or functions may be supported. Check your device’s documentation for

more information.

Note: For information on wireless screen mirroring (PowerLite Home Cinema

2045), see the online User’s Guide.

Computer

Connect one end of an HDMI cable to one of the projector’s HDMI ports and

the other end to an HDMI port on your computer.

Note: For information on connecting the projector to your computer or other

devices (camera, USB flash drive, etc.), see the online User’s Guide.

Connect audio

Note: If the projector is connected using an HDMI connection, you may need

to reduce the projector speaker volume to zero (0), or make sure that the

correct audio output is selected on your device.

Built-in speaker

The projector has a built-in speaker that can play audio from a connected video

source (DVD player, streaming device, etc.) using an HDMI cable. If you do not

use an HDMI connection, you must connect your device’s audio output to the

projector’s audio input.

HDMI cable

Audio cable

Audio Out port

If you have connected an HDMI video source, you can connect the projector

to a set of external speakers or headphones through the Audio Out port. The

connected device must be set to PCM output. The projector can be used to

control the audio level.

3.5 mm stereo

mini cable

Note: The internal speaker is disabled when an external audio device is

connected.

External speakers

Connect your device’s audio output to your home theater receiver or powered

speakers.

Home theater system

Video source

Surround sound Receiver Projector

Video cable

Powered speakers

External speakers Video source Projector

Video cable

Note: See your home theater receiver documentation for more information

on connections.

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The power light on the projector turns blue.

Open the A/V Mute slide all the way.

Press the power button on the projector or remote control. The Status

light flashes blue and then stays on.

Note: To shut down the projector, press the power button twice, then

unplug it. You don’t have to wait for the projector to cool down.

Use the arrow buttons on the remote control to highlight any of the

options on the Home screen that appears, then press Enter to select it.

You can switch between projection sources and quickly access various

adjustment options from this screen.

The default language of the menu system is English. To select another

language, press the Menu button on the projector or remote control.

Select Extended and press Enter. Select Language and press Enter.

Select your language and press Enter. Press the Menu button to exit the

menu system.

Adjust the image

If you don’t see an image, press the Source button on the projector or

one of the source buttons on the remote control to select the image

source.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

To raise the image, press the foot release button and lift the front of the

projector. Release the button to lock the foot in position.

Turn the zoom ring to reduce or enlarge the image.

Turn the focus ring to sharpen the image.

If your image looks like or , you may have placed the projector

off to one side of the screen at an angle. Place the projector directly in

front of the center of the screen, facing the screen squarely. If you can’t

move the projector, use the horizontal keystone slider on the projector to

correct the image shape.

Your projector automatically adjusts images that look like or ,

but if necessary you can press the or buttons on the projector to

correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source

to display

Turn projector

on and off

Control connected

devices with HDMI Link

Switch between

2D and 3D

Access the Home

screen

Navigate projector

menus

Access projector

menus

For more information on using the remote control, see the online

User’s Guide.

Viewing 3D images

To view 3D content, you must first connect a 3D-compatible video device to

one of the HDMI ports on your projector. You also need a pair of Epson

(part

number V12H548006) or Epson-compatible RF 3D active shutter glasses.

Turn on and begin playback on the 3D-compatible video device.

Note: Make sure you set the video device to play content in 3D mode.

Press the 2D/3D button on the remote control, if necessary.

Slide the power switch on your 3D glasses to the On position.

Note: If the glasses don’t automatically display 3D content, you may

need to pair them with the projector. Move the glasses within 10 feet

(3 m) of the projector, then press and hold the Pairing button on the

3D glasses for at least 3 seconds. The status light on the glasses will

alternately flash green and red, then remain green for 10 seconds if

pairing is successful.

PowerLite

Home Cinema 2040/2045

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User’s Guide.

Connect the projector

Choose from the following connections. See the sections below or the online

User’s Guide for details.

Video device

Connect multiple video devices and use the Source button on the projector or

one of the source buttons on the remote control to switch between them.

HDMI cable

RCA video cable

Mobile media device

Connect tablets, smartphones, and other devices that support the MHL

™

standard to the HDMI1 MHL port.

MHL cable

Some devices may require an adapter or may not require an MHL cable. Not all

features or functions may be supported. Check your device’s documentation for

more information.

Note: For information on wireless screen mirroring (PowerLite Home Cinema

2045), see the online User’s Guide.

Computer

Connect one end of an HDMI cable to one of the projector’s HDMI ports and

the other end to an HDMI port on your computer.

Note: For information on connecting the projector to your computer or other

devices (camera, USB flash drive, etc.), see the online User’s Guide.

Connect audio

Note: If the projector is connected using an HDMI connection, you may need

to reduce the projector speaker volume to zero (0), or make sure that the

correct audio output is selected on your device.

Built-in speaker

The projector has a built-in speaker that can play audio from a connected video

source (DVD player, streaming device, etc.) using an HDMI cable. If you do not

use an HDMI connection, you must connect your device’s audio output to the

projector’s audio input.

HDMI cable

Audio cable

Audio Out port

If you have connected an HDMI video source, you can connect the projector

to a set of external speakers or headphones through the Audio Out port. The

connected device must be set to PCM output. The projector can be used to

control the audio level.

3.5 mm stereo

mini cable

Note: The internal speaker is disabled when an external audio device is

connected.

External speakers

Connect your device’s audio output to your home theater receiver or powered

speakers.

Home theater system

Video source

Surround sound Receiver Projector

Video cable

Powered speakers

External speakers Video source Projector

Video cable

Note: See your home theater receiver documentation for more information

on connections.

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The power light on the projector turns blue.

Open the A/V Mute slide all the way.

Press the power button on the projector or remote control. The Status

light flashes blue and then stays on.

Note: To shut down the projector, press the power button twice, then

unplug it. You don’t have to wait for the projector to cool down.

Use the arrow buttons on the remote control to highlight any of the

options on the Home screen that appears, then press Enter to select it.

You can switch between projection sources and quickly access various

adjustment options from this screen.

The default language of the menu system is English. To select another

language, press the Menu button on the projector or remote control.

Select Extended and press Enter. Select Language and press Enter.

Select your language and press Enter. Press the Menu button to exit the

menu system.

Adjust the image

If you don’t see an image, press the Source button on the projector or

one of the source buttons on the remote control to select the image

source.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

To raise the image, press the foot release button and lift the front of the

projector. Release the button to lock the foot in position.

Turn the zoom ring to reduce or enlarge the image.

Turn the focus ring to sharpen the image.

If your image looks like or , you may have placed the projector

off to one side of the screen at an angle. Place the projector directly in

front of the center of the screen, facing the screen squarely. If you can’t

move the projector, use the horizontal keystone slider on the projector to

correct the image shape.

Your projector automatically adjusts images that look like or ,

but if necessary you can press the or buttons on the projector to

correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source

to display

Turn projector

on and off

Control connected

devices with HDMI Link

Switch between

2D and 3D

Access the Home

screen

Navigate projector

menus

Access projector

menus

For more information on using the remote control, see the online

User’s Guide.

Viewing 3D images

To view 3D content, you must first connect a 3D-compatible video device to

one of the HDMI ports on your projector. You also need a pair of Epson

(part

number V12H548006) or Epson-compatible RF 3D active shutter glasses.

Turn on and begin playback on the 3D-compatible video device.

Note: Make sure you set the video device to play content in 3D mode.

Press the 2D/3D button on the remote control, if necessary.

Slide the power switch on your 3D glasses to the On position.

Note: If the glasses don’t automatically display 3D content, you may

need to pair them with the projector. Move the glasses within 10 feet

(3 m) of the projector, then press and hold the Pairing button on the

3D glasses for at least 3 seconds. The status light on the glasses will

alternately flash green and red, then remain green for 10 seconds if

pairing is successful.

PowerLite

Home Cinema 2040/2045

Declaration of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or

CPU Boards and Power Supplies used with Class B Personal Computers

We: Epson America, Inc.

Located at: 3840 Kilroy Airport Way, MS: 3-13, Long Beach, CA 90806

Telephone: (562) 981-3840

Declare under sole responsibility that the product identiﬁed herein, complies with

47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,

is identical to the representative unit tested and found to be compliant with the

standards. Records maintained continue to reﬂect the equipment being produced can

be expected to be within the variation accepted, due to quantity production and testing

on a statistical basis as required by 47CFR 2.909. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Trade Name: Epson

Type of Product: LCD Projector

Model: H707C/H709C

Marketing Name: PowerLite Home Cinema 2040/2045

Epson America, Inc. Limited Warranty

Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty.

What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser

of the Epson projector product enclosed with this limited warranty statement that the

product, if purchased new and operated in the United States, Canada, or Puerto Rico will

be free from defects in workmanship and materials for a period of two (2) years from the

date of original purchase. This limited warranty applies only to the projector and not to

the projector lamp, which carries a limited warranty period of ninety (90) days from the

date of original purchase. For warranty service, you must provide proof of the date of

original purchase.

What Epson Will Do To Correct Problems: If your product requires service during

the limited warranty period, please call Epson at the number on the bottom of this

statement and be prepared to provide the model, serial number, and date of original

purchase. Epson will, at its option, repair or replace the defective unit, without charge

for parts or labor. If Epson authorizes an exchange for the defective unit, Epson will

ship a replacement product to you, freight prepaid, so long as you use an address in

the United States, Canada, or Puerto Rico. You are responsible for securely packaging

the defective unit and returning it to Epson within ﬁve (5) working days of receipt of

the replacement. Epson requires a debit or a credit card number to secure the cost of

the replacement product in the event that you fail to return the defective one. If Epson

authorizes repair instead of exchange, Epson will direct you to send your product to

Epson or its authorized service center, where the product will be repaired and sent back

to you. You are responsible for packing the product and for all costs to and from the

Epson authorized service center. When warranty service involves the exchange of the

product or of a part, the item replaced becomes Epson property. The exchanged product

or part may be new or refurbished to the Epson standard of quality, and at Epson’s

option, the replacement may be another model of like kind and quality. Epson’s liability

for replacement of the covered product will not exceed the original retail selling price of

the covered product. Exchange or replacement products or parts assume the remaining

warranty period of the product covered by this limited warranty. If Epson replaces the

lamp as part of the warranty service, the replacement lamp carries the limited 90-day

warranty stated above.

What This Warranty Does Not Cover: This warranty covers only normal use in the United

States, Canada, or Puerto Rico. Excessive continual use is not considered normal use. This

warranty does not cover consumables such as ﬁlters. This warranty is not transferable.

Epson is not responsible for warranty service should the Epson label or logo or the

rating label or serial number be removed. Epson is not responsible for warranty service

should the product fail to be properly maintained or fail to function properly as a result

of misuse, abuse, improper installation, neglect, improper shipping, damage caused by

disasters such as ﬁre, ﬂood, and lightning, improper electrical current, software problems,

the use of non-Epson lamps, add-in cards or cables, interaction with non-Epson products,

or service other than by Epson or an Epson Authorized Servicer. Postage, insurance, or

shipping costs incurred in presenting your Epson product for carry-in warranty service are

your responsibility. Epson will pay for all freight charges if you choose to send your unit

to Epson for repair. If a claimed defect cannot be identiﬁed or reproduced in service, you

will be held responsible for costs incurred.

DISCLAIMER OF WARRANTIES: THE WARRANTY AND REMEDY PROVIDED ABOVE ARE

EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR

A PARTICULAR PURPOSE AND NON-INFRINGEMENT. UNLESS STATED HEREIN, ANY

STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID.

Remedies: Your exclusive remedy and Epson’s entire liability for a material breach of

this Agreement will be limited to a refund of the price paid for the Epson products

covered by this Agreement. Any action for breach of warranty must be brought within

3 months of the expiration date of the warranty. Epson is not liable for performance

delays or for nonperformance due to causes beyond its reasonable control. Except as

provided in this written warranty, neither Epson nor its afﬁliates shall be liable for any

loss, inconvenience, or damage, including direct, special, incidental or consequential

damages, including lost proﬁts, cost of substitute equipment, downtime, claims of third

parties, including customers, or injury to property, resulting from the use or inability to

use the Epson products, whether resulting from a breach of warranty or any other legal

theory. Some jurisdictions do not allow limits on warranties or remedies for breach in

certain transactions. In such jurisdictions, the limits in this paragraph and the preceding

paragraph may not apply.

In Canada, warranties include both warranties and conditions.

Arbitration, Governing Laws: Any disputes arising out of this Agreement will be settled

by arbitration, before a single arbitrator in Los Angeles, California, in accordance

with the commercial Arbitration Rules of the American Arbitration Association, and

judgment upon the award rendered by the arbitrator may be entered in any court

having jurisdiction thereof. This Agreement shall be construed in accordance with the

laws of the State of California, except this arbitration clause which shall be construed in

accordance with the Federal Arbitration Act.

You can also automatically convert 2D HDMI content to 3D. To enable the

2D-to-3D Conversion option, press the Menu button on the projector or

remote control. Select Signal and press Enter, then select 3D Setup and

press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak,

Medium, or Strong setting, then press Enter.

See the online User’s Guide for more information on adjusting 3D images.

Troubleshooting

If you see a blank screen or the No signal message after turning on your

computer or video device, check the following:

•

Make sure the Status light on the projector is blue and not flashing, and

the A/V Mute slide is open.

•

Press the Home button on the projector or remote control to verify

source input and settings.

•

Press the Source button on the projector or one of the source buttons

on the remote control to switch to the correct image source, if necessary.

•

If you’re using a Windows

laptop, press the function key on your

keyboard that lets you display on an external monitor. It may be labeled

CRT/LCD or have an icon such as . You may have to hold down the

Fn key while pressing it (such as Fn + F7). Wait a moment for the display

to appear.

•

If you’re using a Mac laptop, open System Preferences and select

Displays. Click the Arrangement tab and select the Mirror Displays

checkbox.

If 3D images aren’t displaying properly, check the following:

•

Press the 2D/3D button to switch to 3D viewing mode, if necessary.

•

Make sure that you are within the 3D viewing range. See the online

User’s Guide for more information.

•

Check that your 3D glasses have not entered standby mode. Slide the

power switch on the 3D glasses into the Off position, then back to the

On position.

•

Press the Menu button on your remote control, select the Signal menu,

then 3D Setup, then select 3D Format. Make sure that the Auto option

is selected.

•

Check that your video device and media are both 3D-compatible. Refer

to the documentation that came with your video device for more

information.

Where to get help

Manual

For more information about using the projector, click the icon on your desktop

to access the online manual (requires an Internet connection). If you don’t

have a User’s Guide icon, you can install it from the projector CD or go to the

Epson website, as described below.

Telephone support services

To use the Epson

PrivateLine

Support service, call (800) 637-7661. This service

is available for the duration of your warranty period. You may also speak with

a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday,

and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are

subject to change without notice. Toll or long distance charges may apply.

Internet support

Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions

to common problems. You can download utilities and documentation, get

FAQs and troubleshooting advice, or e-mail Epson.

Registration

included with your projector or register online at epson.com/webreg.

EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of

Seiko Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of Epson

America, Inc.

Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.

General Notice: Other product names used herein are for identification purposes only and may be trademarks

of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX CPD-43307

Optional accessories

For a list of optional accessories, see the online User’s Guide.

You can purchase Epson RF 3D glasses (part number V12H548006) or other

accessories from an Epson authorized reseller. To find the nearest reseller,

call 800-GO-EPSON (800-463-7766). Or you can purchase online at

epsonstore.com (U.S. sales) or epson.ca (Canadian sales).

Notices

Wireless notice

Bluetooth

Contains Bluetooth Module Model: DBUB-E207

Built-in Wireless LAN

Contains Wireless LAN module Model: WN7122BEP (PowerLite Home Cinema 2045)

Intel

WiDi/Miracast

Contains Wireless LAN module Model: DNUK-E92 (PowerLite Home Cinema 2045)

Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment. This equipment

should be installed and operated keeping the radiator at least 7.9 inches (20 cm) or

more away from person’s body. This device is restricted to indoor operations only.

FCC/IC Statement

Model: DBUB-E207 (Bluetooth)

Contains FCC ID: BKMAE-E207; Contains IC: 1052D- E207

Model: WN7122BEP (Wireless LAN) (PowerLite Home Cinema 2045)

Contains FCC ID: BKMAE-7122; Contains IC: 1052D- 7122

Model: DNUK-E92 (Intel WiDi/Miracast) (PowerLite Home Cinema 2045)

Contains FCC ID: BKMAE- E92; Contains IC: 1052D- E92

U.S.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of this device.

Radiation Exposure Statement:

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be

installed and operated keeping the radiator at least 7.9 inches (20 cm) or more away

from person’s body.

Canada

Contains IC: 1052D-E207, 6100A-AWWH064R

This Class B digital apparatus complies with Canadian ICES-003.

CAN ICES-3(B)/NMB-3(B)

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20 cm between the radiator and your body.

To ﬁnd the Epson Authorized Reseller nearest you, please visit our website at:

epson.com.

To ﬁnd the Epson Customer Care Center nearest you, please visit epson.com/support.

To contact the Epson Connection

, please call (800) 637-7661 or

(562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to

Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.