2. Racelogic
  3. RLACS268

Racelogic RLACS268, VBOX Video HD2 User guide

  • Hello! I've reviewed the Mounting Bracket Assembly Guide for the ACS268-ASSEM and VBOX VIDEO HD2 and I am ready to assist you. This document provides instructions on how to properly assemble the mounting bracket for the VBOX VIDEO HD2 using specific hardware and tools. If you have any questions about the components, the assembly process, or how to securely mount device, feel free to ask!
  • What size hex key is needed to attach the upper harness bar brackets to the mount base?
    How many button head screws are used to secure the upper half of the mount?
    What size hex key is needed to secure the upper half of the mount?
VBOX VIDEO HD2 Mounting
Bracket Assembly Guide (ACS268-ASSEM)
Assembly Guidelines
1. Attach the upper harness bar brackets to the mount base using the four black counter sunk
screws provided and tighten using the 3/32” hex key.
2. Place the VIDEO VBOX HD2 on the mount
base and secure by attaching the upper half
of the mount using the six button head
screws and the 3mm hex key.
3. Ensure the VIDEO VBOX HD2 is straight
and mounted securely.
VBOX VIDEO HD2 Mounting
Bracket Assembly Guide (ACS268-ASSEM)
4. Place the upper harness bar brackets on
the desired vehicle roll cage location and
secure using the lower harness bar
brackets and the four cap head
screws provided. Tighten using the
9/64” hex key.
5. Ensure the mount is straight and secure before use.
www.vboxmotorsport.com
Issue1
/