Assembly Instrucons
42880271 4 Wire Drawer Narrow Unit
ATTENTION: While assembling secons D and E and using a mallet, plasc chips may be released,
this is normal and should not be of concern. Place either cardboard or a blanket on the floor so
that both the floor and the drawer unit will be protected during assembly.
Tool Required
Screw Driver
(Not Provided)
Mallet Required
(Not Provided)
A X 1 B X 1 C X 4 D X 2 E X 2 F X 1
G X 8 H X 8 I X 6 J X 4 K X 2 L X 2
Step 1 Step 2
Step 3 Step 4
To aach
to wall