Crown Automotive RT21002 Installation guide

Brand
Crown Automotive
Model
RT21002
Type
Installation guide

This manual is also suitable for

Crown Automotive RT21002 is a heavy-duty ball joint set designed to replace worn-out ball joints in your vehicle's suspension system. These ball joints are made from high-quality materials and are engineered to withstand the rigors of off-road driving. They come with a 12-month warranty and have a break-in period of 500 to 1,000 miles.

The RT21002 ball joint set includes everything you need to replace your vehicle's upper and lower ball joints. The set includes two upper ball joints, two lower ball joints, and all necessary hardware. The ball joints are easy to install and come with detailed instructions.

Crown Automotive RT21002 is a heavy-duty ball joint set designed to replace worn-out ball joints in your vehicle's suspension system. These ball joints are made from high-quality materials and are engineered to withstand the rigors of off-road driving. They come with a 12-month warranty and have a break-in period of 500 to 1,000 miles.

The RT21002 ball joint set includes everything you need to replace your vehicle's upper and lower ball joints. The set includes two upper ball joints, two lower ball joints, and all necessary hardware. The ball joints are easy to install and come with detailed instructions.

RT Off-Road HD Ball Joint Set
Installation Tips
Part Numbers: RT21002, RT21003
• For detailed instructions in replacement of the upper and lower ball joints, refer to a factory service manual. Proper training is essential to
perform this service.
• A ball joint press kit is required for installation. These kits are available at many local tool stores, auto part stores, and online.
• The Heavy Duty Ball Joints come with a 12-month warranty from time of purchase. These warranties are non-transferable.
• Remove the boots from the ball joints prior to installation to ensure they are not damaged. Remember to re-install the boots before
installing the knuckles.
• Ensure the ball joint’s grease fittings are accessible after installation. Do not install grease fittings until service is complete.
• These Heavy Duty Ball Joints have a break-in period of 500 to 1,000
miles. The driving characteristics of the vehicle may be affected until
break-in period is complete.
• Lubricate the ball joints immediately after installation and every 5,000
miles using synthetic grease.
• Have the vehicle professionally aligned once installation is complete.
While&every&attempt&is&made&to&ensure&that&the&information&contained&in&these&
instructions&is&correct,&no&liability&can&be&accepted&by&the&authors&for&loss,&damage,&or&injury&caused&by&any&errors&in,&or&omissions&from&the&information&given.&All&service&
should&be&performed&by&qualified&mechanics.&Crown&Automotive&Sales&Co&.,Inc.&cannot&be&held&responsible&for&any&mechanical&work&performed.&Standard&and&accepted&
safety&precautions&should&be&used&in&every&procedure.&
&
&
&
&
&
&
&
&
&
RT Off-Road HD Ball Joint Set
Installation Tips
Part Numbers: RT21002, RT21003
• For detailed instructions in replacement of the upper and lower ball joints, refer to a factory service manual. Proper training is essential to
perform this service.
• A ball joint press kit is required for installation. These kits are available at many local tool stores, auto part stores, and online.
• The Heavy Duty Ball Joints come with a 12-month warranty from time of purchase. These warranties are non-transferable.
• Remove the boots from the ball joints prior to installation to ensure they are not damaged. Remember to re-install the boots before
installing the knuckles.
• Ensure the ball joint’s grease fittings are accessible after installation. Do not install grease fittings until service is complete.
• These Heavy Duty Ball Joints have a break-in period of 500 to 1,000
miles. The driving characteristics of the vehicle may be affected until
break-in period is complete.
• Lubricate the ball joints immediately after installation and every 5,000
miles using synthetic grease.
• Have the vehicle professionally aligned once installation is complete.
While&every&attempt&is&made&to&ensure&that&the&information&contained&in&these&
instructions&is&correct,&no&liability&can&be&accepted&by&the&authors&for&loss,&damage,&or&injury&caused&by&any&errors&in,&or&omissions&from&the&information&given.&All&service&
should&be&performed&by&qualified&mechanics.&Crown&Automotive&Sales&Co&.,Inc.&cannot&be&held&responsible&for&any&mechanical&work&performed.&Standard&and&accepted&
safety&precautions&should&be&used&in&every&procedure.&
!"#$% &''$( )"*$(
+,-./01(234%$( 70#ft./lbs 70#ft./lbs
5,-+/01(234%$( 75#ft./lbs 80#ft./lbs
67-+809(23#0:;$("<$$ 75#ft./lbs 80#ft./lbs
58-+.0:;$("<$$ 75#ft./lbs 80#ft./lbs
5/-6=0:">>2?;$ 75#ft./lbs 80#ft./lbs
@2%%0A"B3C0DEC0F"(GE$0:;2(C
!"#$% &''$( )"*$(
+,-./01(234%$( 70#ft./lbs 70#ft./lbs
5,-+/01(234%$( 75#ft./lbs 80#ft./lbs
67-+809(23#0:;$("<$$ 75#ft./lbs 80#ft./lbs
58-+.0:;$("<$$ 75#ft./lbs 80#ft./lbs
5/-6=0:">>2?;$ 75#ft./lbs 80#ft./lbs
@2%%0A"B3C0DEC0F"(GE$0:;2(C
  • Page 1 1

Crown Automotive RT21002 Installation guide

Brand
Crown Automotive
Model
RT21002
Type
Installation guide
This manual is also suitable for

Crown Automotive RT21002 is a heavy-duty ball joint set designed to replace worn-out ball joints in your vehicle's suspension system. These ball joints are made from high-quality materials and are engineered to withstand the rigors of off-road driving. They come with a 12-month warranty and have a break-in period of 500 to 1,000 miles.

The RT21002 ball joint set includes everything you need to replace your vehicle's upper and lower ball joints. The set includes two upper ball joints, two lower ball joints, and all necessary hardware. The ball joints are easy to install and come with detailed instructions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents