Technical Pro AX2000 Owner's manual

Brand
Technical Pro
Model
AX2000
Type
Owner's manual
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NOUSER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
The lighti ng flash with arro whea d symb ol with in an equil ater al tria ngle is i nte nded t o alert the user to the pr esen ce
Of “dang erous ” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
Electr ic sho ck to hu mans. Use rs shoul d ex hibi t extra safety when this symbol appears in this instruction manual and
Follo w all precaution s as the y are sta ted .
The ex clamat ion poi nt within a n equil ate ral tria ngle i s inte nded t o alert the u ser to th e pres enc e of impo rtant
Opera ting a nd mai nten ance (servi cing ) instructions in this man ual.
1- Read the se ins truct ions t horo ughly b efor e using this it em.
2- Keep these i nstru ction s for fu ture referen ce.
3- Heed a ll warni ngs .
4- Follow all instructions.
5- WARNING: To preven t fire or el ectr ic sho ck, do no t expos e this equipm ent to ra in or mo istu re. Do no t store or oper ate thi s
Produc t nea r any liquid s.
6- Clean o nly wit h a dry colth .
7- Do not st ore or opera te thi s product ne ar any heat sou rces su ch as rad iator s, heat regis ters, stoves , or other apparatuses
(including amplifiers) that produce heat.
8- Do not def eat the saf ety pur pose of the pol ariz ed or gr ound ing -type pl ug. A polarize d plug ha s two bl ades with one wide r tha n
The ot her. A ground ing pl ug has two bla des an d a rou nd gro unding prong . The wid e blade or third prong is prov ided f or you r safet y.
If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protec t the al l wires con nected to this un it from being w alked on or pinc hed, particular ly plugs and th e point wher e they ex it from
The unit . Wh en remo ving t he cor d from the po wer ou tlet , remov e it by holdi ng the plug no t by pul ling the cord.
10- Unplug the un it dur ing ligh ting s tor ms or wh en unu sed for l ong p eriods of tim e.
11- When w iring this unit an d all othe r equip ment used in c onne ction to this un it mak e sure that al l of you r equip ment is turn ed OFF.
12- Once in stalla tion an d wiring is comp lete po wer o n all your equipm ent with the volume and leve l cont rols turne d DOWN . Once
All th e eq uipment is ON s lowl y rais e the vol ume or level co ntr ols to the ir prop er pos itions .
13- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in gr oundin g in this unit.
14- When you hav e finis hed us ing th is unit , be sure that bot h tr ay doo rs are close d usin g the op en / cl ose bu tton bef roe p ower ing
Off the unit.
15- Before placin g, ins tallin g, rig ging, or suspe nding a ny pro duct, inspec t all ha rdwar e, sus pens ion, c abinet s, tra nsduce rs, brac kets
And associated equipment for damage. Any missing, corr oded , defor med, o r non-load rated component could significantly reduce
The str ength of the i nstal lation , plac ement or arr ay. An y such c ondit ion sev ere ly redu ces the safet y of the ins tallat ion an d shou ld be
Immed iately corrected. Use only har dwar e which is rated for the lo ading c ondit ions of the ins tallat ion an d any po ssib le shor t-term,
Unex pec ted over loadi ng. Neve r excee d the r ating o f the har dwar e or equ ipme nt.
16- Consult a li censed , pro fession al engi nee r rega rding ph ysic al equi pmen t instal latio n. Ensur e that al l local , sta te and nation al
Regu lation s rega rding the safe ty and o perat ion of equipm ent are und ersto od and adhere d to.
17- Refer all ser vicing to qua lifie d ser vice pe rson nel. S ervicing i s required w hen th e appa ratu s has bee n damag ed in any way,
Such as po wer sup ply cor d or plug is dama ged, liquid h as bee n spill ed or o bject s have f allen into th e appa raus , the app arat us
Has been ex pose d to rain or moisture, does no t ope rate normal ly, or ha s been drope d.
Introduction
Congratulations and thank you for you r purc has e of thi s Technica l Pro professi onal am pli fier, the AX2000. To get th e mos t fr om ou r
AX2000, it is reo mme nded t hat you revie w all of t he info rmatio n prov ided i n the instruction manua l befo re oper ating the eq uipm ent.
If you’ve spent an y time at all in prof essi onal au dio, y ou kno w the nam e Tech nical P ro and what it s tands f or- incre dible perf orman ce&
soun d, and the ult ima te in re liablit y und er har sh condi tio ns. And no w, Technica l Pro off ers the s ame te chno logy in a series of amp lifie rs
Brin ging m ore of what se ts Technical Pro apar t from all oth ers.
AC POWER CORD CONNECTION
To connect the power cord to your amplifier simply plug female side of the power cord into
the power cord input which is on the rear of the amplifier. Then plug the male side of the power
cord to an electric outlet. The AC power cords supplied purposefully have 2 blades and one
grounding prong. If your outlet is not equipped to handle this type of plug, do not attempt to
forcefully plug this AC power cord into the outlet, and do not alter the plug so that it can fit in
the outlet. The only course of action you can take is to find another outlet which is properly
equipped to handle a grounded plug or have an electrician upgrade your electrical outlet.
Be sure that the plug is well connected so that it does not disconnect in the middle of usage.
If any point in time the supplied AC power cord is punctured or damaged replace it with a new
power cord from a local electrician
NOTE: ONLY PLUG IN THE AC POWER CORD WHILE THE UNIT’S POWER IS OFF
AND THE VOLUME IS TURNED DOWN. TURNING ON THE UNIT WITH THE VOLUME
TURNED UP MAY CAUSE THE UNIT OR ANY SPEAKERS CONNECTED TO IT TO BE
DAMAGED. ALWAYS TURN DOWN THE VOLUME PRIOR TO TURNING OFF THE UNIT.
INPUT / OUTPUT CONNECTIONS
Connecting the signal source to the AX2000 ( DVD/MIXER etc .)
The AX2000 has two RCA input jacks on the rear of the unit which is designed to receive the
signal directly from your DVD,mixer or any of your other 2 Channel signal sources. To ensure
that you have correctly connected your DVD player (other sound sources) to the unit, make
sure that the DVD player has a RCA cord coming from its output and that this cord is plugging
into the RCA input on the rear of the AX2000. Ensure that the polarity of your signale is
always maintained by using color coordinated RCA cables.
NOTE: BE SURE NOT TO CONNECT AN AMPLIFIER OR ANY AMPLIFIER SIGNAL INTO
THE RCA INPUT JACK. AS THIS COULD DAMAGE THE AX2000. NO OTHER AMPLIFIER
IS NEEDED TO POWER YOUR SIGNAL IN ADDITION TO THE AX2000. ALWAYS MAKE
SURE THAT THERE IS ONLY ON AMPLIFIER IN THE SIGNAL PATH.
Connecting the AX2000 to passive speakers
The amplifier is designed to power up to two full range passive loudspeakers. Connect up to two
speakers using the banana binding post outputs with a banana connector or speaker wire. If you
are using speaker wire to connect via the banana binding post, follow the instructions on Page5.
NOTE: WHEN MAKING THESE CONNECTIONS THE POWER OF THE AX2000 AND THE
SIGNAL SOURCES SHOULD ALL BE IN THE OFF POSITION WITH THE VOLUME LEVELS
TURNED DOWN. ONCE THE UNITS ARE ALL POWERED ON, SLOWLY INCREASE THE
VOLUME TO AVOID DAMADGING ANY OF YOUR EQUIPMENT. THE AMPLIFIER OPERATED
MOST EFFICIENTLY WHEN USED WITH 8 OHM SPEAKERS
ACCESSORIES INCLUDED: POWER CABLE, RCA CABLE, MANUAL AND WARRANTY.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Technical Pro AX2000 Owner's manual

Brand
Technical Pro
Model
AX2000
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents