Samsung ACW341S/XSE User manual

Type
User manual
Air Cleaner
OWNER’S
INSTRUCTIONS
ACW341C
ACW341D
ACW341F
ACW341L
ACW341S
E R
DB98-22912A(1)
ACW341C IB_E_22912 4/18/05 6:16 PM Page 21
E-
2
Safety Precautions
The following safety precautions must be taken into account when using this product.
Do not install this product in places where it will come into contact with
combustible gases such as sulfuric gas, hydrogen gas, methane gas, etc.
Do not install this product in places that are exposed to direct sunlight,
near heating equipments and wet places.
When installing the electric wires, do not bend the wire excessively
or place a heavy object on it. The wires may be disconnected or
damaged.
Avoid using inflammable spray gases such as insecticides near
this product.
Prevent children from inserting their fingers or objects into the air inlet
and outlet.
Do not attempt to install or repair this product by yourself. If the
product needs repairing, consult an authorized service personnel.
WARNING
Do not install this product on surfaces that are not even or slant.
This may cause the product to malfunction or make a strange noise
due to vibration.
Make sure that the product is installed in a location that ensures
enough space(at least 5 cm) in front of the air inlet.
Make sure that there are no obstacles near the air inlet and
outlet of the product.
If a strange noise, burning smell or smoke come from the product,
immediately disconnect the power supply and consult an authorized
service personnel.
Do not use this product for other purposes.
Do not spill any kind of liquids into the product.
Do not place containers containing liquid substances on top of the
product.
Do not apply excessive impact on the product.
When using this product in a closed area that combustible fuels are
fired, make sure to ventilate the air occasionally.
Do not use the product in places that have a high temperature and
humidity level, such as a bathroom or a sauna.
Before attempting to clean or repair the product, make sure that the
power supply is disconnected and the fan has stopped rotating.
Do not use substances such as benzene, thinner or alcohol to clean
the surface of the product.
Do not open the filter box when the product is in operation.
When drying the washable filters, do not expose it to direct sunshine.
The powerful sunshine may affect the transformation of the filter case.
Do not touch the filter section with wet hands because the user may be
electrocuted. This is especially true for the Washable Filter section
where a high voltage current flows.
CAUTION
Register your product at www.samsung.com/global/register
ACW341C IB_E_22912 4/18/05 6:16 PM Page 2
E-
3
Contents
P
REPARING THE
A
IR
C
LEANER
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
O
PERATING THE
A
IR
C
LEANER
Selecting the Automatic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Selecting the Pollen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting the Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting the Odor Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
O
THER
F
UNCTIONS
Generating Anions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the Clean Level (Fan Speed) . . . . . . . . . . . . . . . . . . . . . 13
R
ECOMMENDATIONS FOR
U
SE
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning the Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
T
ECHNICAL
S
PECIFICATIONS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
ACW341C IB_E_22912 4/18/05 6:16 PM Page 3
E-
4
Main Unit
Control panel
Handle
Air outlet
Air flow direction blade
Filter box
Power plug
Cover sensor section
(Dust/Odor sensor)
View of the Unit
Metallic Pre-filter
(Nano Silver Coating)
Formaldehyde
filter
VOCs
filter
Allergen
filter
HEPA
filter
Anti-bacterial
fan
Bionizer
Dust Filter Section
8 Step Cleaning System
Deodorizing Filter Section
ACW341C IB_E_22912 4/18/05 6:16 PM Page 4
E-
5
Control Panel
Well-Being Indicator
Bionizer Indicator
Filter Reset Button Off Timer Button
Filter Reset
Indicator
Bionizer Button Clean Level
Selection Button
Power Button
Operating Mode
Selection Button
Remote Control Sensor
Clean Level IndicatorIndoor Temperature/
Off Timer Indicator
Operating Mode Indicator
Contamination
Level Indicator
Contamination Level Indicator
- Classifies the contamination level based on the state of Dust, Mote and Odor
with the Dust/Odor sensor.
- Green indicates that the indoor air is clean. Orange means that the indoor
air is contaminated.
- During the first 2 minutes after the air cleaner is turned on, the contamination
level will move up and down because the sensor will be in
the process of analyzing the contamination level of the
indoor air. So it is recommended that you check the
contamination level after 2 minutes.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 5
E-
6
Getting Started
You have just purchased an air cleaner and it has to be installed according
to the safety precautions of page 2.
This Owner’s Instructions booklet contains important information
concerning the use of your air cleaner. Please take some time to
read this booklet as it will help you take full advantage of the product's features.
The booklet is organized as follows.
The following figures are shown from page 4 to 6 :
- View of the Unit
They will help you find the buttons and understand the symbols
that are displayed.
In the manual, you will find a series of step-by-step
procedures for each function available.
Three types of symbols are used to help you understand the illustrations
in the step-by-step procedures :
PRESS PUSH HOLD DOWN
ACW341C IB_E_22912 4/18/05 6:16 PM Page 6
Selecting the Automatic Mode
E-
7
In the Automatic Mode, the air cleaner automatically adjusts the clean level according
to the signal of the more contaminated level after comparing the dusts and motes
contamination level with the odor contamination level in the indoor air. Anions are
generated into an air automatically and the air flow blade does not move.
1
If the is not displayed on the display, select the Auto mode by pressing
the button until it is displayed on the display.
Result
: The air cleaner beeps.
The air cleaner operates in the Auto mode.
2
To adjust the clean level, refer to page 13.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
You can change modes at any time.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 7
Selecting the Pollen Mode
E-
8
The Pollen Mode can eliminate pollen and dust particles effectively in the indoor
air. In this operating mode, the air cleaner automatically adjusts the clean level
according to the dusts or motes contamination level without the odor
contamination level in the indoor air. Anions are generated automatically
and the air flow blade moves automatically.
1
If the is not displayed on the display, select the Pollen mode by pressing
the button until it is displayed on the display.
Result
: The air cleaner beeps.
The air cleaner operates in the Pollen mode.
2
To adjust the clean level, refer to page 13.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
You can change modes at any time.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 8
Selecting the Sleep Mode
E-
9
If you wish the air cleaner to clean the air in your room quietly, select the
Sleep Mode. In this operating mode, the air cleaner runs in "Low Speed"
which is the quietest clean level setting. Anions are generated into an air
automatically and the air flow blade does not move.
1
If the is not displayed on the display, select the Sleep mode by pressing
the button until it is displayed on the display.
Result
: The air cleaner beeps.
The air cleaner operates in the Sleep mode.
2
To adjust the clean level, refer to page 13.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
You can change modes at any time.
NN
NN
oo
oo
tt
tt
ee
ee
The brightness of the display during the Sleep Mode
In the Sleep Mode, the brightness of the display decreases so that
it may not disturb your sleep.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 9
Selecting the Odor Mode
If you select the Odor Mode, the air cleaner can eliminate airborne contaminants and
harmful smells effectively in the indoor air. In this operating mode, the air cleaner
automatically adjusts the clean level according to the signal of the odor contamination
level without the dusts and motes contamination level in the indoor air. Anions are
generated automatically and the air flow blade moves automatically.
1
If the is not displayed on the display, select the Odor mode by pressing
the button until it is displayed on the display.
Result
: The air cleaner beeps.
The air cleaner operates in the Odor mode.
2
To adjust the clean level, refer to page 13.
To adjust the generating anions, refer to page 11.
3
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
You can change modes at any time.
NN
NN
oo
oo
tt
tt
ee
ee
E-
10
VOCs(Volatile Organic Compounds) are substances which are
evaporated easily at the room temperature. Common sources
which emit VOCs into the indoor air include housekeeping
products, building and furnishing materials. In sufficient quantities,
VOCs can have direct adverse effects on human health. Many
VOCs have been classified as toxic and carcinogenic substances.
Therefore it is harmful to be exposed to these compounds for a
long period.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 10
Generating Anions
E-
11
The Bionizer generates anions, which are beneficial to the human body.
Use this function if you want to feel refreshed both physically and mentally,
just as if you were in the midst of a forest.
If the air cleaner is turned on, anions are generated automatically.
1
If the Bionizer Indicator is not displayed on the display, select the Bionizer
function by pressing the button.
Result
: The air cleaner beeps.
The Bionizer Indicator lights up on the display.
The air cleaner generates anions into the indoor air.
2
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
If you wish to turn off the Bionizer function, press the button again.
Result
: The Bionizer Indicator disappears on the display.
The air cleaner stops generating anions into the indoor air.
3
Anions are ultra-fine particles charged negatively in the air.
There are vast quantities of them in nature, for example near
waterfalls or in the midst of a forest. When inhaled in sufficient
quantities, anions can enhance the metabolism of your blood cells,
help you recover from fatigue faster, and calm your nerves.
Thus anions are beneficial to you both physically and mentally.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 11
Setting the Off Timer
The air cleaner turns off automatically at the appointed time.
You can set the time from 1 hour to 24 hours.
1
Press the button until the required time is displayed to set the Off Timer.
You can set the time between 1 hour and 24 hours.
Result
: Each time you press the button, the time is adjusted by
1 hour or 6 hours.
2
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
Result: The Off Timer you have set is canceled.
The indoor temperature is displayed.
Press the button until the timer indicator disappears.
E-
12
You can set the Off Timer only when the air cleaner is turned on.
NN
NN
oo
oo
tt
tt
ee
ee
To cancel the Off Timer
ACW341C IB_E_22912 4/18/05 6:16 PM Page 12
Adjusting the Clean Level (Fan Speed)
E-
13
The air cleaner automatically adjusts the clean level according to the
contamination levels of the indoor air. It is also possible for you to
manually select the clean level.
1
If you wish to manually select the clean level, press the button one or
more times until the desired clean level is selected.
Result
: The air cleaner beeps.
The air cleaner operates in the clean level that was selected.
2
If necessary, press the (Power) button.
Result
: The Power indicator on the display comes on.
The air cleaner runs in the Auto Mode.
The air cleaner makes a ringing sound.
If you wish the air cleaner to automatically adjust the clean level for you,
press the button until the Auto mode is selected.
Result
: The clean level that was selected is canceled.
The air cleaner operates in the Auto mode.
The air cleaner automatically chooses the appropriate clean
level according to the levels of contamination in the indoor air.
3
(Turbo)
(High)
(Medium)
(Low)
ACW341C IB_E_22912 4/18/05 6:16 PM Page 13
Operating Recommendations
Here are a few recommendations that you should follow when using
your air cleaner.
Topic Recommendation
HEPA indicator
If the light on the "HEPA" indicator comes on,
the HEPA filter must be replaced.
If the HEPA filter is not replaced, the product’s
air filtering function may decrease.
Well-being indicator
If the light on "Well-being" indicator comes on,
the deodorizing filters must be replaced.
If the deodorizing filters are not replaced,
the product's air filtering function may decrease.
Closing the air flow blade
If you want to close the air flow blade, use the
Power button on the control panel.
Do not close the air flow blade with your hands.
E-
14
ACW341C IB_E_22912 4/18/05 6:16 PM Page 14
Cleaning the Air Cleaner
E-
15
Cleaning the Cover Sensor Section
To get the best possible result from your air cleaner, you must clean
the lens of the dust sensor regularly. The dust sensor is responsible
for sensing the accumulation level of small and big dust particles in
the air in your room.
1 Open the cover sensor section cover.
2 Clean the lens of the Dust sensor thoroughly and get rid of the dust of
around the Odor sensor with a cotton stick.
Dust sensor
Odor sensor
Dust sensor lens
Cover sensor
section
Cover sensor
section
Vacuum
cleaner
Odor sensor net
Use a tool that has a narrow end, such as a mini-screwdriver,
when opening the cover sensor section cover.
NN
NN
oo
oo
tt
tt
ee
ee
If the lens of the Dust sensor is cleaned with a volatile matter,
the lens is damaged, so the Dust sensor may not work properly.
NN
NN
oo
oo
tt
tt
ee
ee
3 After you have cleaned the lens of the Dust sensor and the Odor
sensor, put the cover sensor section cover back into the place.
You must clean the lens of the Dust sensor every 6 months.
However, this may vary according to the time and place that the
air cleaner was operated. So the air cleaner must be cleaned more
often in environments that have a high level of dust accumulation.
The Odor sensor does not have a lens. So you do not need to clean
the Odor sensor net.
You can clean the cover sensor section with the vacuum cleaner
without opening it.
NN
NN
oo
oo
tt
tt
ee
ee
ACW341C IB_E_22912 4/18/05 6:16 PM Page 15
Cleaning the Air Cleaner (Continued)
E-
16
3 Replace the old HEPA filter with new one.
5 Press the button for 2 seconds.
Result
: The HEPA Indicator on the control panel turns off. It will
light up again when the time for the next filter replacement
comes.
The air cleaner beeps.
4 After pushing the Dust Filter Section back into the place,
close the Filter box.
Replacing the Dust Filters
The HEPA filter is responsible for eliminating fine particles of dust, molds
and mites in the air that are small as 0.5 microns. Replace the HEPA filter
every 2~3 years or whenever the HEPA Indicator lights on.
1 Open the Filter box and pull out the Dust Filter Section as seen in the
picture.
2 Pull out the HEPA filter from the Dust Filter Section.
The Metallic Pre-filter can be used permanently. Clean it every
month with running water.
Detach the Metallic Pre-filter by pulling it out from the groove on
the filter frame.
You only need to replace the HEPA Filter once in 2~3 years or
when the HEPA Indicator lights up. However, the replacing
frequency of the HEPA Filter may vary according to the time and
place that the air cleaner is operated.
You can purchase new HEPA filter in an authorized service center.
NN
NN
oo
oo
tt
tt
ee
ee
Metallic Pre-filter
(Nano Silver Coating)
HEPA filter
Even though the HEPA Indicator does not light up,
always press the button for 2 seconds after replacing
the HEPA filter.
IMPORTANT
Dust filter section
ACW341C IB_E_22912 4/18/05 6:16 PM Page 16
E-
17
3 Replace the old Formaldehyde Filter, VOCs Filter and Allergen Filter with
new one, and place it back into the Deodorizing Filter Section.
5 Press the button for 2 seconds.
Result
: The Well-being Indicator on the control panel turns off.
It will light up again when the time for the next filter
replacement comes.
The air cleaner beeps.
4 After pushing the Deodorizing Filter Section back into the place,
close the Filter box.
Replacing the Deodorizing Filters
The Deodorizing filters eliminate odor or contaminants of the air
cleaner. Replace the Deodorizing filter every 2~3 years or whenever
the Well-being Indicator lights on.
1 Open the Filter box and pull out the Deodorizing Filter Section as seen
in the picture.
2 Separate the Allergen Filter, VOCs Filter and Formaldehyde Filter from
the Deodorizing Filter Section.
You only need to replace the Deodorizing Filters once in 3 years
or when the Well-being Indicator lights up.
However, the replacing frequency of the Deodorizing Filters may
vary according to the time and place that the air cleaner is
operated.
You can purchase new Deodorizing Filters in an authorized
service center.
NN
NN
oo
oo
tt
tt
ee
ee
Formaldehyde filter
VOCs filter
Allergen filter
Even though the Well-being Indicator does not light up,
always press the button for 2 seconds after replacing
the filters in the Deodorizing Filter Section.
IMPORTANT
Deodorizing filter
section
ACW341C IB_E_22912 4/18/05 6:16 PM Page 17
Solving Common Problems
E-
18
Explanation/Solution
Check for a power failure.
Check that the power plug is plugged in tightly.
Check that the power outlet is not of a poor quality.
Check that the Filter box is closed properly.
Problem
The air cleaner does not
operate.
Before contacting the after-sales service, perform the following simple checks.
This may prevent you from making an unnecessary call and wasting your time and money.
Check whether the Filter box was opened during operation.
Press the Power button if you wish to restart the air cleaner.
The air cleaner stops its
operation abruptly
Make sure that the air cleaner is used in places that have
a high level of odor permeating contaminants in the air.
The air cleaner cannot fully function in an environment where the
level of contamination is too high.
Check whether the source of the unpleasant odor is the unclean
filters in the Filter box.
Unpleasant odors can be
detected coming from the air
cleaner.
Check whether the air cleaner is operating in the Sleep Mode.
In the Sleep Mode, the display automatically diminishes its
brightness to ensure a comfortable sleeping setting.
The Display Brightness is too
dim.
Make sure that you have pressed the HEPA Replace button after
you have finished replacing the HEPA filter or pressed the
Well-being Replace button after you have finished replacing the
Deodorizing filters.
The HEPA and Well-being
Indicators stay on.
Contact the service center.The error code
is displayed.
Check if you use a humidifier near the air cleaner.
- The steam from the humidifier may be attached to the Dust/Odor
sensor.
Use the air cleaner away from the humidifier.
Orange light turns on on the
Contamination Level Indicator when
you use a humidifier and an air
cleaner at the same time.
Close the air flow blade by using the Power button on the control
panel. Do not close the air flow blade with your hands.
The air flow blade does not close.
Check that the air cleaner is in the Auto or Sleep Mode.
- In the Auto or Sleep Mode, the air cleaner automatically does not
move the air flow blade.
The air flow blade does not
move.
ACW341C IB_E_22912 4/18/05 6:16 PM Page 18
Technical Specifications
E-
19
Model
ACW341C
ACW341D
ACW341F
ACW341L
ACW341S
220-240V~, 50/60Hz
Power Supply
ACW341C IB_E_22912 4/18/05 6:16 PM Page 19
ELECTRONICS
Printed in Korea
THIS AIR CLEANER IS MANUFACTURED BY:
ACW341C IB_E_22912 4/18/05 6:16 PM Page 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Samsung ACW341S/XSE User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI