18 19
MH 5 E KH 5 E
..................... 4421 92 01... ............. 4421 79 01...
..................... 4421 87 01... ............. 4421 75 01...
..................... 4123 72 01... ............. 4123 57 01...
..................... 4123 62 01... ............. 4123 27 01...
...000001-999999 ...000001-999999
.......................1200 W .........................1200 W
.........................600 W ...........................600 W
............................... ..............................300 min
-1
............................... ..............................300 min
-1
.......................2840 min
-1
..................... 2840 min
-1
..........................8,5 J .............................. 8,5 J
...........................13 J ............................... 13 J
............................... ................................40 mm
............................... ................................65 mm
............................... ................................90 mm
...........................66 mm ..........................66 mm
..........................6,2 kg ............................ 6,6 kg
............................... ................................99 dB (A)
............................... ..............................110 dB (A)
...........................91 dB (A)
.........................101 dB (A)
.........................104 dB (A)
............................... ................................13 m/s
2
............................... ...............................1,5 m/s
2
........................ 11,5 m/s
2
............................9 m/s
2
..........................1,9 m/s
2
.........................1,9 m/s
2
ENGLISH
TECHNICAL DATA
Production code.......................................................................
..............................................................................................
..............................................................................................
..............................................................................................
Rated input ..............................................................................
......................................................................................
No-load speed .........................................................................
Speed under load max. ...........................................................
Rate of percussion under load max. ........................................
....
.......................................
.....................................................
Tunnel bit in concrete, bricks and limestone ...........................
Core cutter in concrete, bricks and limestone .........................
Chuck neck diameter ...............................................................
...........................
E
Sound pressure level .......................................
............................................
Wear ear protectors!
E
tool is .......................................................................................
user’s ear.
................................................
.............................................
Wear ear protectors!
Vibration emission value a
h
h
.......
.......................................................................
h
....................................
.......................................................................
instructions.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise can cause
hearing loss.
Loss of
Cutting
electric shock.
air should be connected via a residual current device of
and apron.
machine is running.
WARNING
ENGLISH
health. Do not inhale the dust. Wear a suitable dust
protection mask.
SPECIFIED CONDITIONS OF USE
hammer drilling and chiselling in stone and concrete.
The hammer can be used for chiselling in stone
and concrete.
normal use.
EC-DECLARATION OF CONFORMITY
Alexander Krug
Managing Director
MAINS CONNECTION
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
times.
to exchanging the brushes the tool should be sent to
performance.
SYMBOLS
starting the machine.
machine.
Do not dispose of electric tools together
equipment and its implementation in
that have reached the end of their life must
protection against electric shock does not
double insulation or reinforced insulation,
are provided.