Laser SPK-BT540LED Quick User Manual

Brand: Laser

Model: SPK-BT540LED

Category: Musical Equipment

Type: Quick User Manual

This manual is also suitable for

SPK-SB100

Laser SPK-BT540LED is a versatile audio device that combines powerful sound with convenient features. With its Bluetooth connectivity, you can wirelessly stream music from your smartphone, tablet, or other Bluetooth-enabled devices. The built-in LED lights add a touch of ambiance to your listening experience, creating a party-like atmosphere. The speaker also features a built-in microphone, allowing you to make and receive hands-free calls.

QUICK USER MANUAL SPK-SB100

IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS

- Read all instructions carefully before use.

- Retain manuals for future reference.

- Use this product only in the manner described.

- Only use a water-dampened soft-cloth to clean the surface of this product.

- The following will damage this product: any liquid such as water or moisture, extreme heat; cold;

humidity, dusty or sandy environments.

- Only place this device on stable surfaces and ensure that any attached cables are secure and will not

cause the device to fall.

- There are no user serviceable parts in this product.

- Un-authorized attempts to dismantle or repair this product will void product warranty

- Using this device near other electronic devices may cause interference.

QUICK USER MANUAL SPK-SB100

CONNECTIONS

Play / Pause (Play or pause music

playback. Hold for 3 seconds in Radio

mode to auto scan and save)

2 Input (Aux  FM  Bluetooth)

3 Select Previous

4 Select Next

A Audio Input (RCA Left (White) Right (Red))

B Stereo Output (for sound bar)

C Power On / Off Switch

D Mains power lead

E FM Antenna

F Adjustable Bass Level

QUICK USER MANUAL SPK-SB100

THE REMOTE CONTROL

REPLACING THE BATTERIES

1. Open the battery compartment by

sliding the cover back.

2. Insert the new battery as pictured

making you have observed the

correct polarity

3. Close the battery compartment.

Note: the remote control has

a usable angle of 30 degrees from

the speaker IR receiver.

1 Power (Turn On and Off)

2 Number keypad

3 Equaliser (Normal, jazz, rock, pop,

classic and bass)

4 Input (Aux  FM  Bluetooth)

5 Vol + (Increase volume)

Vol - (Decrease volume)

6 Prev (Select previous)

7 Mute (Mute sound)

8 100+ (Not for model SPK-SB100)

9 Repeat (Not for model SPK-SB100)

Next (Select next)

Play / Pause (Play or pause music

playback. Hold for 3 seconds in Radio

mode to auto scan and save)

QUICK USER MANUAL SPK-SB100

CONNECTING AND TURNING ON

1) Connect the Sound Bar to the Bass unit to the plugs with the white and red labelled

“Output”.

2) Connect the Speaker Cabinet using the RCA cable to your Audio device such as DVD or

Blu-Ray player.

3) Connect the Speaker Cabinet to 240V mains power using the mains cable.

4) Switch the unit on. Note: the default mode is FM radio if no other external audio

device is connected.

5) Adjust the BASS levels using the BASS knob at the back of the speaker cabinet

USING FM RADIO

1) Press the INPUT button to toggle to the RADIO function.

2) For the first time use, press and hold the PLAY/PAUSE to auto search and save the

available channels in your area. These stations will be designated “P 01” through to “P

20”

3) Use the NEXT and PREVIOUS buttons to toggle to your preferred station and adjust

the volume as preferred.

USING BLUETOOTH

1) Press the INPUT button to toggle to the BT function. A BT icon will begin to flash on

screen, which means the Bluetooth “pairing mode” has been activated.

2) Turn the Bluetooth function on, on your device (smart phone or tablet etc).

3) Scan for new devices, and look for SPK-SB100 to pop up on screen.

4) Once found and selected, you will be prompted for a password to complete the

pairing process. The password is 0000 (4 zeros).

5) Once connected and paired, the screen will show a solid BT icon to indicate pairing

has been completed.

6) You are now ready to listen to music wireless via your sound bar. Open your music

files, select a song and press play.

SPECIFICATIONS

Output Power 16 and 6W x 2

Frequency response 40Hz – 20Khz

Impedance Cabinet 4Ohm, Sound bar 8Ohm

Signal / Noise Ratio >80dB

Isolation sensitivity >45dB

Speaker size (Speaker cabinet) 4”

Speaker size (Speaker bar) 3”

Input power 220 – 240v 60Hz

QUICK USER MANUAL SPK-SB100

Warranty Against Defects

Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and

workmanship for 12 months, from the date of purchase, provided that the product is used in

accordance with accompanying recommendations or instructions where provided. The benefit of this

warranty is in addition to your rights under the Australian Consumer Law and to other rights and

remedies of the consumer under a law in relation to the goods or services to which the warranty

relates.

Through a network of retailers and resellers, Laser will provide you with your choice of a repair,

exchange (where possible) or refund (within Dead on Arrival period) for this product if it becomes

defective within the warranty period.

This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse,

normal wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase

How to make a product warranty claim:

Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be

verified, your place of purchase or Laser will make an assessment based on the date of manufacture,

the condition of the Laser Product and the type of defect.

Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or

fund the product as per their store refund or warranty policy.

Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service

with details of your defective Laser Product: Phone: (02) 9870 3355; or Email: [email protected]

or online www.laserco.com.au/warranty (click on “Consumers (End Users)”). Our business address is at

1/6-8 Byfield Street, North Ryde, NSW 2113

Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When

requested, send us the defective Product and a copy of your receipt. Laser will cover the cost of the

return delivery.

Step 4: Wait for us to contact you. Once we have received your defective Laser Product for

inspection, we will inform you of our assessment of your claim within 7 days. When we contact you, we

will firstly let you know whether you have a valid claim under this Warranty, and if so, we will inform

you whether your defective Laser Product will be replaced or repaired, together with the number of

days you can expect to wait to receive your replaced or repaired Laser Product.

Step 5: For further details on warranty cover and returns, please check Terms and Conditions for

Warranty Returns section on http://www.laserco.com.au/warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You

are entitled to a replacement or refund for a major failure and compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods

fail to be of acceptable quality and the failure does not amount to a major failure.

Laser SPK-BT540LED Quick User Manual

Brand: Laser

Model: SPK-BT540LED

Category: Musical Equipment

Type: Quick User Manual

This manual is also suitable for

SPK-SB100

Download PDF

report

Laser SPK-BT540LED Quick User Manual

This manual is also suitable for

Laser SPK-BT540LED Quick User Manual

Related papers

Other documents