Detail K2 Everest R-3 User manual

Brand: Detail K2

Model: Everest R-3

Type: User manual

This manual is also suitable for

EVST9022

DK2 Everest R-3 man. v.190915

Model:

DETAIL K2 INC.

STOP!

Questions, problems, missing parts? Do not return to your retailer.

Please call our customer service department at: 2XUFXVWRPHUVHUYLFHVWDႇDUHUHDG\WRSURYLGH

assistance. If a part is damaged or missing, replacement parts can be shipped from our facility. For immediate help with

assembly, or for additional product information, call our North American toll-free number: 1(888) 277-6960.

Save this manual

You will need this manual for safety instructions, operating procedures, and warranty.

Put it and the original sales invoice in a safe, dry place for future reference.

Everest R-3

DETAIL K

STOP!

DK2 Snow Plow

Instruction manual

En.2 DK2 Everest R-3 man.

ENGLISH

THANK YOU FOR PURCHASING A DK2 PLOW!

This Snow Plow is designed for residential snow removal.

Please remember to use the right tool for the job at hand. Avoid overtaxing your

Snow Plow.

Take care using it to clear thick, heavy (wet) snow.

Your DK2 Snow Plow is not intended to clear the snow deposits created by large

municipal or commercial Snow Plows, which contain heavy compacted, frozen

lumps of snow and ice, and could damage the plow and vehicle.

If you have any questions or problems with your Detail K2 Snow Plow, including

VHWXSGLႈFXOWLHVEURNHQRUPLVVLQJSDUWVHWFGRQRWUHWXUQSURGXFWWRWKHVWRUH

Please call our toll-free service line at 1(888) 277-6960 to speak to a technician.

Detail K2 Inc., 1080 Clay Avenue Unit #2, Burlington, Ontario, L7L 0A1 Canada

:HUHVHUYHWKHULJKWWRFKDQJHSURGXFWGHVLJQDQGVSHFL¿FDWLRQVZLWKRXWQRWLFHRU

obligation.

THANK YOU FOR PURCHASING A DK2 PLOW! .............. EN.2

IMPORTANT SAFE OPERATING PRACTICES .................. EN.3

CALIFORNIA PROPOSITION 65 ......................................... EN.3

GENERAL ............................................................................... EN.3

PERSONAL SAFETY ............................................................ EN.3

SNOW PLOW ......................................................................... EN.4

VEHICLE ................................................................................ EN.4

D R I V I N G ................................................................................. EN .5

PREPARATION ...................................................................... EN.5

OPERATING SAFETY ........................................................... EN.6

SPECIFICATIONS ................................................................. EN.6

VEHICLE REQUIREMENTS ................................................. EN.6

INSTALLATION STEPS......................................................... EN.8

TROUBLESHOOTING .......................................................... EN.11

SCHEMATIC DRAWING ....................................................... EN.13

ADJUSTMENTS ..................................................................... EN.14

APPENDIX 1 .......................................................................... EN.16

APPENDIX 2 .......................................................................... EN.17

TABLE OF CONTENTS

v.190915 En.3

ENGLISH

IMPORTANT SAFE OPERATING PRACTICES

IMPORTANT: Read safety rules and instructions carefully before operating

this equipment.

CAUTION: SAFETY FIRST

—

Read this manual carefully before operating

your Snow Plow. We recommend that you read this manual completely so that

you are fully aware of all important safety recommendations. Record your serial

number.

DANGER: This equipment was built to be operated according to the rules

for safe operation in this manual. As with any type of power equipment,

carelessness or error on the part of the operator can result in serious injury.

This machine is capable of amputating hands and feet. Failure to observe the

following safety instructions could result in serious injury or death.

To use this equipment properly, you must observe the safety regulations, the

assembly instructions and the operating instructions to be found in this manual. All

persons who use and service the Snow Plow must be informed about its potential

hazards and must be acquainted with this manual. Children should be supervised

at all times if they are in the area in which the Snow Plow is being used. It is also

imperative that you observe the accident prevention regulations in force in your

area. The same applies for general rules of occupational health and safety.

CALIFORNIA PROPOSITION 65

WARNING: This product can expose you to chemicals including DEHP, which

is known to the State of California to cause cancer and birth defects or other

reproductive harm. For more information go to www.P65Warnings.ca.gov.

GENERAL

1. Read your owner’s manual carefully. Get to know your Snow Plow and

familiarize yourself with its applications and limitations.

2. Use the Snow Plow according to the guidelines in this manual. Do not abuse it

or force it to do a job for which it was not designed.

3. Use only original equipment parts and accessories. Consult the owner’s

manual. The use of incorrect accessories may produce unforeseen hazards.

WARNING: Make no attempt to assemble and operate the Snow Plow until

you have thoroughly read this manual and completely understood its contents.

Operating your DK2 Snow Plow improperly can result in serious personal injury

and/or damage to both plow and vehicle. Since Detail K2 Inc. does not complete

its assembly or installation, we cannot be held responsible for any personal

injury or damages that product misuse may produce.

PERSONAL SAFETY

1. For safety, keep children and pets at a distance from the plow and the operating

area.

DANGER! Sitting or riding on the Snow Plow is extremely dangerous. This

could LQÀLFWVHULRXVLQMXU\

WARNING! Never stand between the vehicle and the blade nor stand within

3 m (10 feet) of a blade in motion. Moving or falling blades can cause serious

personal harm.

WARNING! At all times, keep your hands and feet clear of the blade and

winch.

IMP

RTANT:

ead sa

rules and instructions care

ull

ore operating

his equipment.

AFETY FIR

—

Read this manual carefully before operating

—

our

now Plow. We recommend that

ou read this manual completel

so tha

ou are

ull

aware o

all important sa

recommendations. Record

our serial

DAN

ER:

his equipment was built to be operated according to the rule

or sa

e operation in this manual. As with an

pe o

power equipment,

carelessness or error on the part o

the operator can result in serious injur

his machine is capable o

amputating hands and

eet. Failure to observe the

ollowing sa

instructions could result in serious injur

or death.

ARNIN

his product can expose

ou to chemicals including DEHP, which

s known to the

tate o

ali

ornia to cause cancer and birth de

ects or other

eproductive harm. For more in

ormation go to www.P65Warnings.ca.gov.

ARNIN

ake no attempt to assemble and operate the

now Plow until

ou have thoroughl

read this manual and completel

understood its contents.

perating

our DK2

now Plow improperl

can result in serious personal injur

or damage to both plow and vehicle.

ince Detail K2 Inc. does not complete

ts assembl

or installation, we cannot be held responsible

or an

personal

njur

or damages that product misuse ma

produce.

DAN

ER!

itting or riding on the

now Plow is extremel

dangerous. Thi

cou

LFWVHULRXVLQMXU



ARNIN

! N

n th

ade

within

(

eet

)

a blade in motion. Moving or

alling blades can cause seriou

ersonal harm.

ARNIN

! At all times, keep

our hands and

eet clear o

the blade an

En.4 DK2 Everest R-3 man.

ENGLISH

IMPORTANT SAFE OPERATING PRACTICES

2. Make it a practice to completely lower the blade to the ground every time the

vehicle is parked. A raised blade may drop unexpectedly and this can result in

serious personal injury.

WARNING! When mounting or removing the Snow Plow, keep hands and feet

clear of the blade, mounting assembly and winch. Moving or falling assemblies

KDYHDSRWHQWLDOWRFDXVHSHUVRQDOLQMXU\1HYHUXVH\RXU¿QJHUWRFKHFN

DOLJQPHQW0RYLQJRUIDOOLQJDVVHPEOLHVFRXOGFUXVK\RXU¿QJHU

CAUTION: Transport speed should never exceed 70 km/h (45 mph). Adverse

travel conditions may dictate a further speed reduction. Must use appropriate

driving lights

3. Wear a seat belt when plowing snow. Hidden obstacles could make the vehicle

stop suddenly, resulting in personal injury.

4. Put the vehicle in park or into gear and remove the ignition key to prevent

others from starting the vehicle when installing or servicing the plow.

5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes, jewellery or long hair can

EHFDXJKWLQPRYLQJSDUWV)RUZDUPWKZHDUOD\HUVRIFORWKLQJWDNLQJRႇOD\HUV

as you get warmer.

6. Wear safety goggles when working under the hood of the vehicle. for eye

protection from battery acid, gasoline, dirt and dust. Everyday eyeglasses have

only impact resistance lenses. They are not safety glasses.

7. For work connected with the vehicle , avoid touching any hot surfaces such as

the engine, radiator, hoses and exhaust pipes.

8. $OZD\VKDYHD¿UHH[WLQJXLVKHUUDWHG%&KDQG\IRUÀDPPDEOHOLTXLGDQG

HOHFWULFDO¿UHV

9. Do not plow snow with your head out the window. Sudden stops or protruding

obstacles could result in personal injury.

10. The driver only should be in the vehicle when plowing snow.

SNOW PLOW

1. Maintain the Snow Plow and keep it clean and lubricated. This applies even

ZKHQWKHXQLWLVQRWLQXVHVRDVWRDYRLGFRUURVLRQ,QWKHRႇVHDVRQLQVSHFW

the unit and apply corrosion-resistant paint to any areas that show corrosion to

prevent further damage. If stored outside, cover the winch assembly.

2. Carefully inspect your Snow Plow before every use. Particularly check the

alignment of moving parts and tighten any loose screws and bolts.

3. This unit is not intended for commercial use.

WARNING! Carefully inspect all Snow Plow components and bolts for

looseness, wear and damage when mounting or removing the unit and before

transporting it.

4. With heavier full-sized vehicles, mainly through momentum, it may be easier to

damage the plow assembly. Cautious use will help extend your years of trouble-

free service.

VEHICLE

5. Do not attempt plowing snow at speeds above 15 km/h

(10 mph). Driving at speeds above 15 km/h (10 mph) with the plow attached

reduces the cool air intake and may cause your vehicle engine to overheat.

6. Do not overload the vehicle. Take into account the loaded vehicle weight,

including the entire Snow Plow assembly, all accessories, driver and passenger,

ÀXLGVDQGFDUJR7KLVZHLJKWLVQRWWRH[FHHGWKHIURQWUHDU*URVV$[OH

ARNIN

! When mounting or removing the

now Plow, keep hands and

clear o

the blade, mounting assembl

and winch. Moving or

alling assemblie

DYHDSRWHQWLDOWRFDXVHSHUVRQDOLQMXU

1HYHUXVH

RXU

QJHUWRFKHFN

OLJQPHQW0RYLQJRU

DOOLQJDVVHPEOLHVFRXOGFUXVK

RXU

QJHU

ransport speed should never exceed 70 km

(

45 mph

)

. Adverse

ravel conditions ma

dictate a

urther speed reduction. Must use appropriate

riving light

ARNIN

are

ull

inspect all

now Plow components and bolts

ooseness, wear and damage when mounting or removing the unit and be

ore

ransporting it.

v.190915 En.5

ENGLISH

Weight Rating (GAWR), and total Gross Vehicle Weight Rating (GVWR). The

VSHFL¿FUDWLQJVIRU\RXUYHKLFOHDUHQRWHGRQWKHVDIHW\FRPSOLDQFHFHUWL¿FDWLRQ

label attached to the driver’s side door opening. Rear ballast weight may be

necessary to prevent exceeding the front GAWR.

CAUTION: The installation of a Snow Plow may have a bearing on the

warranty for your vehicle. For more information, please carefully consult your

vehicle’s owner’s manual or your vehicle dealer.

7. The sudden jarring stop incurred when hitting hidden obstacles in the snow

could trigger release of your vehicle’s airbags . Consult your vehicle manual or

your vehicle dealer to mitigate this.

8. 6KRXOGLWEHFRPHQHFHVVDU\WRSODFHWKHYHKLFOHRQDKRLVW¿UVWUHPRYHWKH

blade assembly.

DRIVING

CAUTION: Always be certain the quick-mount locking plates on your custom

front mount are secured. If the plow is insecurely attached to the mount, it will

OLNHO\SXOODZD\IURPWKHYHKLFOHIDOOR௺DQGFDXVHVLJQL¿FDQWGDPDJH

and/or injury.

1. The use of lights is recommended, if not required by local regulations, while

plowing at night. Regular vehicle headlights will likely be obscured by the blade.

2. Do not drive on public roads with the Snow Plow attached at the front of your

vehicle.

3. Connect a safety hook when transporting the Snow Plow in the raised position.

4. Do not attempt to change the blade position while traveling as you could

accidentally suddenly lower the plow blade.

WARNING! Consult local/ provincial laws regarding vehicle restrictions

that might apply when the Snow Plow is not attached. Such restrictions may

mandate the removal of the mounting, lift frame, lift arm, winch mechanism or

any other protruding elements mounted to the front of the vehicle during certain

times of the year.

PREPARATION

1. Thoroughly inspect the area where the equipment is to be used. Make yourself

familiar with the terrain you are plowing and avoid all obstacles.

2. Remove all foreign objects such as doormats, newspapers, sleds, boards,

wires, and other items.

3. Before use, ensure that the plow is attached to your custom front mount and

safely secure the quick mount locking plates.

4. Stay away from any obstacles. Familiarize yourself with the area and potential

GLႈFXOWLHVEHIRUHSORZLQJ

5. Never attempt to make any adjustments while vehicle is running, except where

VSHFL¿FDOO\UHFRPPHQGHGLQWKHRSHUDWRU¶VPDQXDOV

6. Exercise caution when changing direction and while operating on slopes.

7. During continuous snowfalls, plow as snow builds to between 8 and 15 cm (3

and 6”).

8. Plan your snow plowing pattern to avoid discharge towards windows, walls,

cars, etc. , thus avoiding possible property damage or personal injury. Never

direct discharge at children, bystanders, and pets nor allow anyone in front of

the plow.

he installation o

now Plow ma

have a bearing on the

arran

our vehicle. For more in

ormation, please care

ull

consult

our

vehicle’s owner’s manual or

our vehicle dealer.

N: Alwa

s be certain the quick-mount locking plates on

our custom

ront mount are secured. I

the plow is insecurel

attached to the mount, it will

LNHO

SXOODZD



URPWKHYHKLFOH

DOOR

௺

DQGFDXVHVLJQL

FDQWGDPDJH

or injur

ARNIN

onsult local

provincial laws regarding vehicle restriction

hat might appl

when the

now Plow is not attached.

uch restrictions ma

he removal o

the mounting, li

rame, li

t arm, winch mechanism or

other protruding elements mounted to the

ront o

the vehicle during certain

imes o

the

ear.

IMPORTANT SAFE OPERATING PRACTICES

NOTE: Apply waterproof

grease to all moving parts and

assemblies

TE: Appl

waterproo

rease to all moving parts an

asse

En.6 DK2 Everest R-3 man.

ENGLISH

IMPORTANT SAFE OPERATING PRACTICES

OPERATING SAFETY

1. Keep bystanders, helpers, pets and children at least 8 metres (25 feet) from the

plow while it is in operation. Stop using it if anyone enters the area. Never allow

children to operate it.

2. Never allow anyone to ride on the plow in operation. Sitting on it may lead to

serious injury.

3. Do not overload plow capacity by attempting to clear snow at too fast a rate.

4. Never operate this machine without good visibility or light. Extra lighting is highly

recommended and, depending on the jurisdiction, may be required on roadways

for nighttime plowing.

5. Never operate the plow at high transport speeds over 16 km/h (10 mph). Above

this speed, vehicle engine overheating may also occur.

6. Exercise caution , especially when operating in reverse.

7. Do not operate without wearing adequate winter outer garments. Do not wear

jewelery, long scarves or other loose clothing which could become entangled in

moving parts. Wear footwear which will improve footing on slippery surfaces.

WARNING: Restrict the use of this plow to persons who read, understand and

follow the warnings and instructions in this manual and on the machine.

WARNING: The warnings, cautions, and instructions detailed in this manual

cannot cover all possible conditions and situations that occur. It must be

understood by the operator that COMMON SENSE AND CAUTION ARE

FACTORS that cannot be built into this product, but MUST BE SUPPLIED BY

THE OPERATOR.

WARNING: DO NOT OPERATE this equipment until it has been assembled

and set up according to the instructions in “Snow Plow Assembly”. Read and

follow all safety rules within this Instruction Manual. Failure to do may result in

serious personal injury.

z Fits most light trucks and SUVs

ARNIN

estrict the use o

this plow to persons who read, understand an

ollow the warnings and instructions in this manual and on the machine.

ARNIN

he warnings, cautions, and instructions detailed in this manual

cannot cover all possible conditions and situations that occur. It must be

understood b

the operator that

E AND

AUTI

N ARE

that cannot be built into this product, but MU

T BE

UPPLIED BY

PERAT

ARNIN

: D

PERATE this equipment until it has been assemble

nd set up according to the instructions in

“S

now Plow Assembl

”. Read an

ollow all sa

rules within this Instruction Manual. Failure to do ma

result in

erious personal injur

v.190915 En.7

ENGLISH

z Easy attachment: slides into your custom mount

z Electric winch with wired remote control for easy up and down snow control

z 3 locking angles: to either side or straight ahead

z Steel construction powder coated with UV-protected paint

z Castors allow attachment and removal in seconds, plus roll-away storage

VEHICLE REQUIREMENTS

WARNING! Always inspect Snow Plow components, connections, and

fasteners for wear or damage every time you attach or detach the Snow Plow.

Worn or damaged components may allow the Snow Plow to fail without warning,

resulting in serious injury or vehicle damage.

VEHICLE RECOMMENDATIONS

The vehicle with the Snow Plow installed must comply with applicable motor

vehicle safety standards and with the vehicle manufacturer’s stated gross vehicle

and axle weight ratings (found on the driver’s side door corner post of the vehicle)

as well as the front and rear weight distribution ratio. In some cases, rear ballast

may be required to comply with these requirements. (See Ballast Requirements

below.)

The weights of front seat occupants can be adjusted above 136 kg (300 lb.), but

the total vehicle weight with Snow Plow must not exceed vehicle GVWR or GAWR.

,QVWDOODWLRQPRGL¿FDWLRQDQGDGGLWLRQRIDFFHVVRULHVPXVWFRPSO\ZLWK

manufacturers’ and regulators’ published recommendations and instructions.

Available capacity decreases as the vehicle is loaded with cargo or other truck

equipment or as Snow Plow accessories are installed.

If there is uncertainty as to whether available capacity exists, the actual vehicle as

FRQ¿JXUHGPXVWEHZHLJKHG

BALLAST REQUIREMENTS

Because of the front/rear axle weight ratio, ballast (additional weight) is important

in qualifying vehicles for Snow Plow eligibility. Rear ballast must be used when

QHFHVVDU\WRUHPDLQLQFRPSOLDQFHZLWKD[OHUDWLQJVDQGUDWLRVDVVSHFL¿HGE\WKH

vehicle manufacturer.

Ballast, if required, must be retained correctly behind the rear axle, distributed

evenly across the width of the vehicle. The weight of the ballast retainer should be

considered part of the ballast weight. We recommend sand bags for ballast.

ARNIN

! Alwa

s inspect

now Plow components, connections, an

asteners

or wear or damage ever

time

ou attach or detach the

now Plow.

Worn or damaged components ma

allow the

now Plow to

ail without warning,

esulting in serious injur

or vehicle damage.

SPECIFICATIONS

En.8 DK2 Everest R-3 man.

ENGLISH

Pre-InstallaƟon

The InstallaƟon should be completed on an asphalt/concrete surface, with suĸĐient area to work. Un-

package your new FRISTTRAX Snowplow, discard all shipping materials, recycle if possible. Once the plow is

un-packaged, slowly roll the plow from its upright shipping conĮguƌĂƟon over onto the built-in cart. Top up

the oil reservoir to ƚŚĞĮůůůine indicated with the 1L of hydraulic oil provided. Your new FIRSTTRAX Snowplow

is now ready to be installed.

InsƚĂůůĂƟon

Step 1 – Install mounƟng brackets and cross bar.

Please follow the instrucƟons included in your mount kit. Fit in place with all fasteners (Įnger Ɵght) then

proceed to Ɵghten with appropriate tools.

Step 2 – Install the main power cord.

**ALWAYS EXERCISE CAUTION WHEN USING HAND TOOLS AROUND THE BATTERY! A SOLID

CONDUCTER SUCH AS A METAL WRENCH CAN CAUSE SEVERE INJURY, FIRE, OR EVEN CAUSE THE

BATTERY TO EXPLODE!

AƩach the short lead on the breaker to the posiƟve “+” terminal of the baƩery. Secure the breaker to the

fender orĮƌewall with the use of screws or zip Ɵes in a place where it will not come into contact with the

nĞŐĂƟǀe terminal. AƩach the negaƟve lead to the negĂƟve “-“baƩery terminal. Route the wires from the

baƩery in the best possible way to

the front of the vehicle avoiding areas that can become hot or cause

friĐƟon when the vehicle is in use. Zip Ɵe the wires to the vehicle’s structure so that they do not move or

shiŌ when in operaƟon. ConĮrm the breaker is in the closed posiƟon, and then close the hood slowly to

make sure

et a

ain that the wires are clear from

inch

oints.

INSTALLATION STEPS

v.190915 En.9

ENGLISH

INSTALLATION STEPS

Step 3 – AƩaching the snowplow to the vehicle.

Roll the plow to the front of your vehicle. The channel on the snowplow liŌ frame is to Įƚ around the cross bar on the

mount. Helpful hint…have the channel which is to slide over the front cross bar parallel to the ground. To alter

placement simply push or pull on the top linkage which will allow you to change the current resƟng place. When prope

placement is achieved the pins on the front of the cross bar will protrude through the channel on the snowplow liŌ

frame. Slide the lock clip(s) over the mushroom shape tab on the cross bar and make sure they drop down into place to

secure.

En.10 DK2 Everest R-3 man.

ENGLISH

INSTALLATION STEPS

Step 4 – Connect the main power hand held control.

Insert the large blue or red plug on the main power cord running from the baƩery into the maƟng

plug on the passenger’s side of the liŌ link arm. Insert the handheld control plug into the matching

rubber molded receptacle. Route the control wire up over the hood, under the driver’s side

windshield wiper arm, around the driver’s side mirror and in through the window. IMPORTANT!

Make sure to leave slack in both cables spanning from the vehicle to the snowplow control box.

This allows the cables to free ŇŽat when the snowplow is in use; if they are ƟŐht they may become

undone or damaged.

Visit the following YouTube links for addiƟon hints

hƩps://youtu.be/rt19JmU0r0A

hƩps://youtu.be/-U0VyedQ41Q

v.190915 En.11

ENGLISH

TROUBLESHOOTING

Plow is not funcƟoning:

1. ConĮrm the main power and control wire plugs are clean and properly connected

2. ConĮrm the control wire is properly connected to the hand held control.

3. ConĮrm that the main power inline breaker was not accidently tripped. Press the red buƩon on top

and push the trip wing back in to reset

Not the Įrst three…

4. Do a quick test of the hand held control, standing between the snowplow and the vehicle on the

passenger’s side unplug the grey control wire at the rubber plug assembly, leave the main power plug

connected, with the

use of needle noise pliers perform the two operĂƟons shown below on the plow

side of the plug. Try raising Įrst and the pump should run, then lower.

To raise the plow… To lower the plow…

A - If the plow operates there is an issue with the control or control wire, check the wire carefully to make sure

is not cut or pinched, remove and reconnect the wire from the boƩom of the hand held control, re-connect the

control wire to the plow and re-test.

En.12 DK2 Everest R-3 man.

ENGLISH

TROUBLESHOOTING

B - If the plow did not operate during the jumper test, check the small 10amp in line fuse down by the pump

motor.

If the fuse is ok remove the pump guard and with the use of a voltage tester conĮƌŵ that there is 12volts on the

main terminal where the red power lead is connected on the solenoid. If there is 12V supply try the next test to

see if the control wire is defecƟve. Remove the cap on the main power feed and the green control wire from the

solenoid. Jumper from main power to the open terminal.

If the pumps runs there is an issue in the control wire on the plow.

If the pump does not run, try this next step to test the solenoid

If the motor runs t

he solenoid is faulty, if the motor does not run the motor is faulty.

v.190915 En.13

ENGLISH

IMPORTANT NOTE!

If you are leaving the snowplow aƩached to a vehicle make sure

rocker switch is in the middle poƐŝƟon on your hand held control

when parked. If it is lĞŌŝŶthe down (oƌŇoat mode) poƐŝƟon it wil

conƟŶue to consume power and eventually drain your baƩery

Skid Shoe Adjustment

With the use of two 1-1/8 open end wrenches loosen the jam nuts, adjust to desired height and re-

Ɵghten

ADJUSTMENTS

v.190915 En.15

ENGLISH

SCHEMATIC DRAWING

ITEM NO. PART NUMBER QTY.

1 8804 1

2 8808-R1 1

3 8809 1

4 8810 1

5 8811-R3 1

6 Mirror8811-R3 1

7 8813 2

8 8813 SP 2

9 8825 1

10 8838 1

ITEM NO. PART NUMBER QTY.

11 8839 1

12 8886 AF 1

13 8890 1

14 8891 2

15 8899 1

16 FW-0500-Z 2

17 FW 0.75 1

18 HH-0375-1500-Z 2

19 HH-0500-4500-Z 2

20 HH-0500-5500-Z 2

ITEM NO. PART NUMBER QTY.

21 HH-0750-6500-Z 1

22 NIN-0375-Z 2

23 NIN-0500-Z 4

24 NIN-0750-Z 2

25 PIN-1000-

6000-Z

26 SDHHMS-0250-

0750-Z

28 8886 AFV 1

En.16 DK2 Everest R-3 man.

ENGLISH

APPENDIX 1

Standard Steel

Bolt Torque Specifications

Bolt

Size

(in.)

Coarse

Threads/

inch

Standard Dry Torque in Foot-Pounds

SAE

Grade

0-1-2

74,000 psi

Low Carbon

Steel

SAE

Grade 3

100,000 psi

Med. Carbon

Steel

SAE

Grade 5

120,000 psi

Med. Carbon

Heat T. Steel

SAE

Grade 6

133,000 psi

Med. Carbon

Temp. Steel

SAE

Grade 7

133,000 psi

Med. Carbon

Alloy Steel

SAE

Grade 8

150,000 psi

Med. Carbon

Alloy Steel

1/4 20 6 9 10 12.5 13 14

5/16 18 12 17 19 24 25 29

3/8 16 20 30 33 43 44 47

7/16 14 32 47 54 69 71 78

1/2 13 47 69 78 106 110 119

9/16 12 69 103 114 150 154 169

5/8 11 96 145 154 209 215 230

3/4 10 155 234 257 350 360 380

7/8 9 206 372 382 550 570 600

1 8 310 551 587 825 840 700

1-1/8 7 480 872 794 1304 1325 1430

1-1/4 7 375 1211 1105 1815 1825 1975

1-3/8 6 900 1624 1500 2434 2500 2650

1-1/2 6 1100 1943 1775 2913 3000 3200

1-5/8 5.5 1470 2660 2425 3985 4000 4400

1-3/4 5 1900 3463 3150 5189 5300 5650

1-7/8 5 2360 4695 4200 6980 7000 7600

2 4.5 2750 5427 4550 7491 7500 8200

v.190915 En.17

ENGLISH

APPENDIX 2

Metric Steel Bolts

Torque Specifications

Bolt Size

Millimeters

Coarse

Thread

Pitch

Standard Dry Torque in Foot-Pounds

Standard 5D

71,160 psi

Med. Carbon

Steel

Standard 8G

113,800 psi

Med. Carbon

Steel

Standard 10K

142,000 psi

Med. Carbon

Steel

Standard 12K

170,674 psi

Med. Carbon

Steel

6mm 1.00 5 6 8 10

8mm 1.00 10 16 22 27

10mm 1.25 31 40 45 49

12mm 1.25 34 54 70 86

14mm 1.25 55 89 117 137

16mm 2.00 83 132 175 208

18mm 2.00 111 182 236 283

22mm 2.50 182 284 394 464

24mm 3.00 261 419 570 689

Detail K2 Everest R-3 User manual

Brand: Detail K2

Model: Everest R-3

Type: User manual

This manual is also suitable for

EVST9022

Download PDF

report

Detail K2 Everest R-3 User manual

This manual is also suitable for

Detail K2 Everest R-3 User manual

Related papers

Other documents