Watts 554 Quick Set-up

tekmarNet

®

Thermostat 554

Quick Setup Guide

554

_

Q

02/15

Zoning

Replaces: New

554_Q - 02/15

1 of 12

A Watts Water Technologies Company

1. Location

2. Remove Mounting Base

3. Install Mounting Base

The information contained herein is not intended to replace the full product installation

and safety information available or the experience of a trained product installer. You are

required to thoroughly read all installation instructions and product safety information

before beginning the installation of this product.

3

1

/4"

(83 mm)

Thermostat

Base

Stud

Gang

Box

Wall

Stud

Thermostat

Base

Interior

Wall

5 feet

1.5 m

Exterior

Wall

Behind

Door

2 of 12

A Watts Water Technologies Company

4. Switch Settings

5. Wiring

Switch

Position

Action

1

ON

LOCK Access level

adjustment is not available.

OFF

UNLOCK Access level

adjustment is available.

tekmarNet

Thermostat 554

One Stage Heat, One Stage Cool, One Fan

Switch

Settings

www.tekmarcontrols.com

Lock

e

d

c

k

/

ON

1

2

Back of Thermostat

R

Y

G

Optional

Outdoor

Sensor

070

Optional

Slab

Sensor

079

Air

Conditioner

tN4 Wiring Center

or Zone Manager

tN4 C W

R

C

tN2

tN4

tN2

R

Rh W Rc Y G S1 S2

Com

No Power

tekmarNet4 Wiring Example

tekmarNet2 Wiring Example

See 554_A for complete

wiring details.

R

Y

G

Optional

Outdoor

Sensor

070

Optional

Slab

Sensor

079

Air

Conditioner

tN2 Wiring Center,

House Control or

Zone Manager

tN2 tN2

C

tN2

tN4

tN2

R

Rh W Rc Y G S1 S2

Com

No Power

3 of 12

A Watts Water Technologies Company

6. Install the Thermostat

7. User Interface

Thermostat

Front

Push

Thermostat

Base

Adjust

the Time

Adjust the

Schedule

Display Heat & Cool

settings, Floor or

Outdoor temperature

Away Key

Switch between

Auto, Heat,

Cool & Off Mode

Return to the

‘Home’ Screen

from any menu

Adjust the

Temperature

Room

Temperature

Turn the Fan on

Home

Button

For a full list of settings and operational details, please refer to the thermostat

Installation and Operation Manual 554_D that is available from tekmarControls.com

All specifications are subject

to change without notice

4 of 12 554_Q - 02/15.

Ltd.,

A Watts Water Technologies Company. Head Ofﬁ ce: 5100 Silver Star Road, Vernon,

B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650

Web Site

: tekmarControls.com

8. Critical Settings

The following settings are essential to the successful operation of the system.

Step 1: Set switch setting #1 and tekmarNet

®

system control located in the mechanical

room to Unlock to change Access level to Installer. Return to Lock setting once installation

has been completed.

Step 2: Press and hold “Home” button for 3 seconds to enter programming menus.

Step 3: Touch NEXT to locate the Setup Menu and touch ENTER.

Setup Menu Settings Range Default

SENSOR 1

Select the type of sensor connected to

auxiliary sensor input 1.

OFF, ROOM, FLOR

(floor), COIL, DUCT

OFF

SENSOR 2

Select the type of sensor connected to

auxiliary sensor input 2.

OFF, ROOM, FLOR

(floor), OUT (outdoor)

OFF

ROOM SENSOR

Select if the built-in room temperature

sensor is on or off.

OFF or ON ON

W TERMINAL UNIT

Select the terminal unit type of the first

stage of heat W.

NONE, HRF1, HRF2,

CONV, COIL, FURN,

OTHR

HRF1 (tekmarNet

®

System Control)

OTHR (standalone)

Page is loading ...

Watts 554 Quick Set-up

This manual is also suitable for

Watts 554 Quick Set-up

in other languages

Related papers

Other documents