If parts become stiff of difficult to operate, ensure dirt is not the cause, then try a light application of a silicon

lubricant, ensuring it penetrates between the components.

Regular lubrication of moving parts will extend the life of your pushchair and make opening and folding easier.

Plastic and metal parts may be sponged lightly using warm water and a mild detergent.

Dry thoroughly before storing.

Refer to sewn in labels for fabric care instructions.

Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.

After exposure to damp conditions, dry off with a soft cloth and leave fully open in a warm environment.

Storing damp will encourage mildew to form.

Store in a dry place

For extra safety, D-rings are provided for the attachment of a separate safety harness approved to BS 6684 or BS EN 13210.

Ensure children are clear of moving parts before making adjustments to the pushchair.

Overloading, incorrect folding and the use of non-approved accessories is unsafe and may damage or break

this pushchair.

Do not allow your child to climb unassisted into the pushchair.

Apply the brake before putting your child into the pushchair.

Be careful when going up or down kerbs.

Remove your child and fold the pushchair when going up or down stairs or escalators.

Don’t let children play with or hang on the pushchair.

Do not use parts or accessories which are not approved by the manufacturer.

If your pushchair is used by someone unfamiliar with it e.g. Grandparents, always show them how it works.

Do not use this pushchair near an open fire or exposed flame.

Take extra care in windy conditions.

To prevent damage, remove the Weathershield

before folding the pushchair.

Do not place anything on top of the Weathershield

.