FLEXCO Tatch-A-Cleat Tatch-A-Lug/Tatch-A-Peg Operating instructions

Brand
FLEXCO
Model
Tatch-A-Cleat Tatch-A-Lug/Tatch-A-Peg
Type
Operating instructions
1. Punch 1/4" hole in belt with Flexco #1 punch or drill.
2. Attach Peg or Lug with fastener set; #10-24 zinc plated
machine screw and special countersunk washer. (Also
available in stainless steel.)
1. Punch 1/4" hole in belt with Flexco #1 punch or drill.
2. Attach Peg or Lug with fastener set; #10-24 zinc plated
machine screw and special countersunk washer. (Also
available in stainless steel.)
• Hammer
• Flexco® #1 Punch or Drill
• Screwdriver
• Hammer
• Flexco® #1 Punch or Drill
• Screwdriver
Tatch-A-Lug Tatch-A-LugTatch-A-Peg Tatch-A-Peg
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA
Tel: (630) 971-0150 • Fax: (630) 971-1180 • E-mail: info@flexco.com
Visit www.flexco.com for other Flexco locations and products.
©2017 Flexible Steel Lacing Company. Tatch-A-Cleat®, Tatch-A-Lug® and Tatch-A-Peg® are
registered trademarks. 01/25/17. X4045
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA
Tel: (630) 971-0150 • Fax: (630) 971-1180 • E-mail: info@flexco.com
Visit www.flexco.com for other Flexco locations and products.
©2017 Flexible Steel Lacing Company. Tatch-A-Cleat®, Tatch-A-Lug® and Tatch-A-Peg® are
registered trademarks. 01/25/17. X4045
TOOLS REQUIRED: TOOLS REQUIRED:
INSTRUCTIONS: INSTRUCTIONS:
Tatch-A-Cleat® Tatch-A-Guide®
Installation Instructions
Tatch-A-Cleat® Tatch-A-Guide®
Installation Instructions
  • Page 1 1

FLEXCO Tatch-A-Cleat Tatch-A-Lug/Tatch-A-Peg Operating instructions

Brand
FLEXCO
Model
Tatch-A-Cleat Tatch-A-Lug/Tatch-A-Peg
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers