2. JasonL
  3. DQDL1207.B.WT

JasonL DQDL1207.B.WT, DQDL1407.B.WT, DQDL1607.B.WT, DQDL1807.B.WT, QDL1207.W.WT, QDL1407.W.WT, QDL1607.W.WT, QDL1807.W.WT Operating instructions

  • Hello! I have reviewed the provided assembly instructions for the Quadro Loop desk. This document details the steps required to assemble the desk, including which tools are needed and the components involved. I'm here and ready to help with any questions you have regarding the assembly process based on the document.
  • What tools are required for assembly?
    How many people are needed for installation?
    What sizes of the desk are available?
ASSEMBLY INSTRUCTIONS
Quadro Loop
Desk
Sizes: 1200, 1400, 1600, 1800 mm
Page 1 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Loop
Desk
Sizes: 1200, 1400, 1600, 1800 mm
Table top x1
Legs Quadro x2
Legs Quadro Loop x2
Beam x1
Plastic bracket x4
A
B
C
D
E
Allen key x2J
M8x20MM CSK x2
M8x20MM Socket head x2
M6x20MM Socket head x4
M6x30MM Socket head x4
F
G
H
I
COMPONENTS
SCREWS
Page 2 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
D
E
F G H I
A
B
C
G
ASSEMBLY INSTRUCTIONS
Quadro Loop
Desk
Sizes: 1200, 1400, 1600, 1800 mm
Using Allen Key provided, attach 2 plastic brackets per leg (E)
(as per picture above) using M6x20MM (H) Socket head screw.
Connect Loop Legs (C) to Bottom of Quadro Legs (B) by using 4
bolts per leg.
Using Allen Key provided, attach M8x20MM Socket head (G)-
screw socket half way into leg for both legs (B)
STEP 02
Page 3 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
STEP 01
ASSEMBLY INSTRUCTIONS
Quadro Loop
Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 03
Adjust extendable beam (D) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Loop
Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 04
TOP VIEW
Attach beam (D) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (D) with Socket (F)
STEP 05
Page 5 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
F
ASSEMBLY INSTRUCTIONS
Quadro Loop
Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 06
Page 6 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktop ontop of frame. Nut inserts in top will align with plastic
joiner brackets using M6x30MM (I) sockets attach top to frame.
I
nut insertnut insert
TABLE TOP
BOTTOM VIEW
/