R82 Panda Futura User guide

Type
User guide

R82 Panda Futura is a modular seating system designed for children and adults with disabilities who lack the ability to maintain a seated position. It can be used indoors and outdoors, and it's suitable for transportation in motor vehicles. The device comes with a range of accessories to support users with different needs, including side supports, vests, belts, and a tray. It also features a dynamic backrest to accommodate users with involuntary movements.

R82 Panda Futura is a modular seating system designed for children and adults with disabilities who lack the ability to maintain a seated position. It can be used indoors and outdoors, and it's suitable for transportation in motor vehicles. The device comes with a range of accessories to support users with different needs, including side supports, vests, belts, and a tray. It also features a dynamic backrest to accommodate users with involuntary movements.

2021-01 rev. 04 R82 A/S Parallelvej 3 DK - 8571 Gedved etac.com
Page 1 of 3
Pre-sales information
Panda Futura seat
User information appropriate for
use by people with visual, reading
or cognitive disability
The latest version of all instructions are always available on the R82
website etac.com and can be printed in larger sizes
Information available in pictogram
The instructions are made as pictograms
Intended use and intended
environment including standard
options
Intended purpose
The device is a modular seating system for children and adults with
disabilities.
Indications
The device can be used by children and adults with disabilities, who lack
the ability to maintain a seated position. The target group for the device
is based on functional ability and not a specific health condition or age
The user is the person sitting in the device. The caregiver is the person
operating the device. Never leave the user unattended in this device.
Ensure permanent supervision by a caregiver.
The use of the device will be discontinued more times during the day
where the user will be lying down, standing or sitting in another assistive
device or a conventional product.
For transportation the device is suitable for children and adults in the
weight range of 22 kg to specified max user weight for transportation.
Contra indications
There are no known contra indications
Precautions
Special attention should be given to the considerations about the
configuration of the product and the use of accessories for users with
limitation in their:
Sensory functions and the sensation of pain consider extra checks of the
pressure caused by the support provided by the device and its
accessories.
Movement function (e.g. experience involuntary movements), consider
using a device with a dynamic backrest.
Ability to maintain a seated position, use the product with accessories
(e.g. side supports, vests, belts or arm supports and a tray).
Ability to maintain the position of their head, consider to use accessories
or to use a product that provide support to the positioning of the head.
Application areas
The product is for indoor and outdoor use
Maintenance instructions
Maintenance of a medical device is wholly the responsibility of the owner
of that device. Failure to maintain a device in accordance with the
instructions may invalidate the device’s warranty. Furthermore, failure to
maintain a device may compromise the clinical condition or safety of
users and/or their caregivers.
Frequency
Description
Daily - Use a dry cloth to clean the product
- Visual inspection. Repair or replace any damaged
or worn-out parts
- Ensure that all fasteners are in place and fitted
correctly
- Check all fittings and buckles for signs of worn out
parts
- Be aware of any max mark indications before
adjustment
Weekly - Wipe off any residue and dirt from the product
using a cloth with warm water and a mild
detergent/soap and dry before use
2021-01 rev. 04 R82 A/S Parallelvej 3 DK - 8571 Gedved etac.com
Page 2 of 3
Pre-sales information
Panda Futura seat
- Disinfect the product. please check the disinfection
section in this User Guide for more information
Monthly - All nuts and bolt on this product must be checked and
tightened to avoid unnecessary failures
- Oil the swing-away parts. We recommend you use a
professional lubricant system.
Annually - Inspect the product for cracks or signs for worn-out
parts and carry o
ut annual service. Never use a
product which appears to be sub-standard or faulty.
Cleaning description
Washing:
The cushion is removable and the cover can be washed at max. 40°C
using a mild detergent in a washing machine. The upholstery is
incontinence proof and can be hand washed in warm water. Let the
foam cushion dry before inserting them back into the cushion cover. The
condition of the upholstery should be checked at least every six months
and replaced if necessary. It is important to keep the frame clean to
maintain the validity of the chair.
Warewashing machine
This product can be washed at 60°C using a mild detergent for 15-20
minutes in a warewashing washing machine designed for medical de-
vices. Use the machine’s drying function to dry the product. Remove all
accessories and cushions before washing the main product. Clean the
accessories separately. Please allow the product to dry before reuse.
Disinfection description
The product without accessories and cushion can be disinfected with a
70% disinfectant solution. It is recommended to wipe off any residue and
dirt from the product, using a cloth with warm water and a mild
detergent/soap without chlorine and let it dry before disinfection.
Dimensions
http://www.etac.com- Select product and go to measurements section
Mass
http://www.etac.com- Select product and go to measurements section
Mass of test dummy is 60 kg (EN12183).
Maximum slope
N/A
Type(s) of tyres
N/A
Used in combination with other
products
Can be used in combination with High-low, Nandu Frame, Multi Frame,
Combi Frame:x and Stingray Frame
Conformity
The product conforms to standard EN 12182 and EN12183 including
requirements and test methods for static, impact and fatigue strengths
(ISO 7176-8)
Resistance to ignition
The product conforms to standard EN 12182 and EN12183 including
requirements for resistance to ignition in accordance with ISO7176-16,
EN1021-1 and EN1021-2
Warning about dangerous
combinations
The CE mark must be removed when rebuilding the product, when used
in combination with a product from another manufacturer or when using
other than original R82 spare parts and fittings.
The Panda Futura seat might loose its flame resistant characteristics if
using other than original R82 cushions.
2021-01 rev. 04 R82 A/S Parallelvej 3 DK - 8571 Gedved etac.com
Page 3 of 3
Pre-sales information
Panda Futura seat
List of accessories, detachable
parts and materials
http://www.etac.com- Select product and go to accessories section
Programmable controller
information
N/A
Operator control adjustments
Manual
Folding and dismantling
N/A
Used in motor vehicles
The Panda Futura seat complies with both 16840-4 and ISO 7176-19,
for safe transportation in motor vehicles. Detailed information about
configurations for frames and seat, max. load/user weight and
transportation can be found at http://www.etac.com under support
documents.
The user should transfer to the vehicle seat and use the vehicle-installed
restraint system whenever possible.
The product must be placed in a forward-facing position, when used as
a seat in a motor vehicle. Use an approved 4-point strap-type tiedown
system according to ISO 10542-2.
Use an approved 3-point belt according to ISO 10542-1 in the
wheelchair. Restraints should not be held away from the body by
wheelchair components such as armrests or wheels. It is not enough
ONLY to use a hip belt.
All accessories must be removed from the wheelchair and secured
separately in the vehicle. Accessories which can not be removed, must
be secured to the wheelchair but positioned away from the user with
energy-absorbing padding placed between the accessories and the
user.
The product should be inspected by the dealer before reuse following
involvement in any type of vehicle collision.
The instructions on how to prepare the seat and frame, must be carried
through before transportation. Transport fittings must be mounted and
labelled as below before use for transportation in motor vehicles.
Ease of access to and manoeuvrability in, motor vehicles can be
significantly affected by size of device and turning radius, and the
smaller device and/or device with a shorter turning radius will generally
provide greater ease of vehicle access and manoeuvrability to a forward
facing position.
In accordance with ISO 7176-19 Annex D, the product is evaluated with
regard to the ability to accommodate vehicle-anchored pelvic and
shoulder belts.
The Panda Futura receives an overall score of “Good”.
Transport instructions (unoccupied)
Land and/or air
Sound power level
N/A
  • Page 1 1
  • Page 2 2
  • Page 3 3

R82 Panda Futura User guide

Type
User guide

R82 Panda Futura is a modular seating system designed for children and adults with disabilities who lack the ability to maintain a seated position. It can be used indoors and outdoors, and it's suitable for transportation in motor vehicles. The device comes with a range of accessories to support users with different needs, including side supports, vests, belts, and a tray. It also features a dynamic backrest to accommodate users with involuntary movements.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI