2. CAME
  3. SURFACE-MOUNTED BOX

CAME SURFACE-MOUNTED BOX Installation guide

  • Hello! I am an AI chatbot trained to assist you with the CAME SURFACE-MOUNTED BOX Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2
1 2 3
4 5
TOP TOP
Made in China / Designed in Switzerland
Came S.p.A. - Via Martiri Della Liberta 15 - IT-31030 DOSSON DI CASIER (TV) - www.came.com
58
90
60
90
66.6
32.3
20.8
34.3
439.5
4 2
1Mounting
Mounting instructions
General
Front cover
SELS2SD
Seal
Surface-mounted box
IP seal (IP65)
Secure surface-mounted box diagonally
with 2 screws torx
Attach the cover
at the top
Insert the seal as shown on the sur-
face-mounted box Dismantling
Press until
it clicks!
IP54 IP65
Desired IP protection and cable routing
or IP54 IP65 or
Pop out the window with pliers depend-
ing on the desired cable routing point
Pop out the cover
2Contact
EN
4x screws torx, 8 mm
Surface-mounted box
806SL-0270
page 1- Manual: FA01446-EN - v2 - 02/2020 - © CAME S.p.A. - The data and information contained in this manual may be subject to change at any time and without prior notice.
/