CAME SURFACE-MOUNTED BOX Installation guide

CAME
Brand
CAME
Model
SURFACE-MOUNTED BOX
Type
Installation guide
2
1 2 3
4 5
TOP TOP
Made in China / Designed in Switzerland
Came S.p.A. - Via Martiri Della Liberta 15 - IT-31030 DOSSON DI CASIER (TV) - www.came.com
58
90
60
90
66.6
32.3
20.8
34.3
439.5
4 2
1Mounting
Mounting instructions
General
Front cover
SELS2SD
Seal
Surface-mounted box
IP seal (IP65)
Secure surface-mounted box diagonally
with 2 screws torx
Attach the cover
at the top
Insert the seal as shown on the sur-
face-mounted box Dismantling
Press until
it clicks!
IP54 IP65
Desired IP protection and cable routing
or IP54 IP65 or
Pop out the window with pliers depend-
ing on the desired cable routing point
Pop out the cover
2Contact
EN
4x screws torx, 8 mm
Surface-mounted box
806SL-0270
page 1- Manual: FA01446-EN - v2 - 02/2020 - © CAME S.p.A. - The data and information contained in this manual may be subject to change at any time and without prior notice.
  • Page 1 1

CAME SURFACE-MOUNTED BOX Installation guide

CAME
Brand
CAME
Model
SURFACE-MOUNTED BOX
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents