Enwork Skyline Screens Installation guide

Enwork
Brand
Enwork
Model
Skyline Screens
Type
Installation guide
TI0046 - Skyline Installation Guide - Rev B.
SKYLINE MAGNETIC TOPPER
SCREENS INSTALLATION GUIDE
SCREENS
WARNING:
Acrylic screens scratch and scuff easily. After removing
protective lm, immediately and carefully install the screen.
DO NOT remove protective lm from acrylic screens, then stack
them in a pile or against each other. Experience shows this will
cause marring and scratching.
INSTALLATION GUIDE
1) PARTS AND FASTENERS INCLUDED
2) TOOLS AND SUPPLIES REQUIRED
Screen Panel
2x Phillips Screwdrivers
Binding Bolt Pair Magnetic Bracket
INSTALLATION GUIDE
Locate the Magnetic Brackets and Binding Bolts.
Conrm that the magnets are installed.
Sandwich the Acrylic or Acoustic Panel Screen between
the Magnetic Brackets and attach them all together with
the Binding Bolt pair.
Place the assembly in its location and verify that the
magnets are sitting ush on the surface. If not, loosen
the bolts to let the magnet sit ush.
FIGURE 1
FIGURE 2
FIGURE 3
3) ASSEMBLY:
Specications subject to change without notice.
Rev 06.2020
1.800.815.7251
www.enwork.com
12900 Christopher Dr. Lowell, MI 49331
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Enwork Skyline Screens Installation guide

Enwork
Brand
Enwork
Model
Skyline Screens
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents