Akro-Mils 29302, 29303 Operating instructions

  • Hello, I have analyzed the instructions for the AKRO-MILS Label Holder Insert 29302 & 29303. This document provides guidance on creating custom label templates using word processing software, setting specific margins, dimensions, and installation tips. I'm ready to assist with any questions you might have about these inserts or the related instructions.
  • How do I create a custom label template?
    What are the settings for the label template?
    How to ensure proper fit when installing the labels?
LASER/INK JET COMPATIBLE INSERTS
For Label Holder Items #29302 & #29303
INSTRUCTIONS
USING YOUR WORD PROCESSING SOFTWARE:
1. CREATE A CUSTOM LABELS TEMPLATE:
Select Tools from your Toolbar
From the drop down window select Envelopes & Labels
On the Labels Tab;
Click the Options button
In the box labeled Label Products: Choose "Other"
Click on the New Label button
2. SETTINGS:
In the box labeled Label Name: Enter a name for your New Labels (i.e. Our Product #29302 or 29303)
Top Margin: 0.44"
Side Margin: 0.25"
Label Height: 1.69"
Vertical Pitch: 1.69"
Label Width: 4"
Horizontal Pitch: 4"
Number Across: 2
Number Down: 6
Set Page Size: Letter, 8-1/2" x 11"
CLICK OK
You now have a custom template saved for your "New" Akro-Mils Label Holder Inserts. You can create a full page of the same
label, single labels, or mail merges. To use this template at another time: Click on Tools, Envelopes & Labels,
Label Products, Select "Other" then click on the Product # (This is the Label Name you just created i.e. 29302 or 29302).
NOTE: Labels to be inserted into Holder with the beaded side at the top to ensure proper fit when installed.
1293 South Main St.• Akron, OH 44301
1-800-253-2467 • www.akro-mils.com
Inserts for
FITS BIN SIZES
QTY.
Item #
29302 &
29303
30230, 30234, 30235,
30239,30240, 30250,
30255, 30348, 30358,
302601, 30265, 30270
36
/