2. Northern Industrial Tools
  3. 14219

Northern Industrial Tools 14219 Owner's manual

  • I have analyzed the provided user manual for the hand truck model 188205. This document provides clear instructions on how to change the hand truck's position from vertical to inclined and from inclined to horizontal. I am ready to answer your questions about the device and its functions.
  • How to change from vertical to inclined position?
    How to change from inclined to horizontal position?
#188205
How to change from vertical to inclined function
1. Slide the loop handle onto back side of frame
2. Lay down the frame
3. Open the hook and then put the loop handle into the hook.
How to change from inclined to horizontal function
1. Lay hand truck to horizontal.
2. Put the tube into the hole .
Made in Taiwan
/