Aruba R9F20A Reference guide

HPE FlexFabric 12900E Switch Series

Fundamentals Command Reference

Software

version: Release 5210

Document version: 6W100-20230424

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard

Enterprise products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett

Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or

copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s

standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise

website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the

United States and other countries.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX® is a registered trademark of The Open Group.

i

Contents

Basic CLI commands ····················································································· 1

display [ | [ by-linenum ] { begin | exclude | include } ]················································································ 1

display > ····················································································································································· 2

display >> ··················································································································································· 3

display history-command ··························································································································· 4

display history-command all ······················································································································· 4

display hotkey ············································································································································ 5

hotkey ························································································································································· 7

quit ····························································································································································· 9

repeat ························································································································································· 9

return ························································································································································ 11

screen-length disable ······························································································································· 11

system-view ············································································································································· 12

RBAC commands ························································································ 14

description ················································································································································ 14

display role ··············································································································································· 14

display role feature ··································································································································· 22

display role feature-group ························································································································ 23

feature ······················································································································································ 26

interface policy deny ································································································································ 26

permit interface ········································································································································ 27

permit vlan ················································································································································ 29

permit vpn-instance ·································································································································· 30

role ··························································································································································· 32

role default-role enable ···························································································································· 33

role feature-group ····································································································································· 33

rule ··························································································································································· 34

super ························································································································································ 38

super authentication-mode ······················································································································· 39

super default role ····································································································································· 40

super password ········································································································································ 41

super use-login-username ······················································································································· 42

vlan policy deny ········································································································································ 43

vpn-instance policy deny ·························································································································· 44

Login management commands ···································································· 46

activation-key ··········································································································································· 46

authentication-mode ································································································································· 48

auto-execute command ···························································································································· 50

character-encoding ································································································································ 51

character-encoding check ························································································································ 52

command accounting ······························································································································· 53

command authorization ···························································································································· 54

databits ····················································································································································· 55

display | original-encoding ························································································································ 55

display character-encoding ······················································································································ 56

display line ··············································································································································· 57

display telnet client ··································································································································· 59

display user-interface ······························································································································· 59

display users ············································································································································ 61

escape-key ··············································································································································· 62

flow-control ··············································································································································· 63

free line ···················································································································································· 64

free user-interface ···································································································································· 65

history-command max-size ······················································································································ 65

http acl ······················································································································································ 66

ii

http ipv6 acl ·············································································································································· 67

https acl ···················································································································································· 68

https ipv6 acl ············································································································································ 69

idle-timeout ··············································································································································· 70

line ···························································································································································· 70

line class ·················································································································································· 71

lock ··························································································································································· 73

lock reauthentication ································································································································ 73

lock-key ···················································································································································· 74

parity ························································································································································ 75

protocol inbound ······································································································································· 76

screen-length ··········································································································································· 78

send ························································································································································· 79

set authentication password ····················································································································· 79

shell ·························································································································································· 80

speed ······················································································································································· 81

stopbit-error intolerance ··························································································································· 82

stopbits ····················································································································································· 82

telnet ························································································································································ 83

telnet client source ··································································································································· 84

telnet ipv6 ················································································································································· 85

telnet server acl ········································································································································ 86

telnet server acl-deny-log enable ············································································································· 87

telnet server dscp ····································································································································· 87

telnet server enable ·································································································································· 88

telnet server ipv6 acl ································································································································ 88

telnet server ipv6 dscp ····························································································································· 89

telnet server ipv6 port ······························································································································· 90

telnet server port ······································································································································ 90

terminal character-encoding ····················································································································· 91

terminal type ············································································································································· 92

user-interface ··········································································································································· 92

user-interface class ·································································································································· 93

user-role ··················································································································································· 95

FTP commands ··························································································· 97

FTP server commands ····································································································································· 97

display ftp-server ······································································································································ 97

display ftp-user ········································································································································· 97

free ftp user ·············································································································································· 98

free ftp user-ip ·········································································································································· 99

free ftp user-ip ipv6 ·································································································································· 99

ftp server acl ··········································································································································· 100

ftp server dscp ········································································································································ 101

ftp server enable ···································································································································· 101

ftp server ipv6 dscp ································································································································ 102

ftp server ssl-server-policy ····················································································································· 102

ftp timeout ·············································································································································· 103

FTP client commands ···································································································································· 103

? ····························································································································································· 104

append ··················································································································································· 104

ascii ························································································································································ 105

binary ····················································································································································· 105

bye ························································································································································· 106

cd ··························································································································································· 107

cdup ······················································································································································· 107

close ······················································································································································· 108

debug ····················································································································································· 109

delete ····················································································································································· 109

dir ··························································································································································· 110

disconnect ·············································································································································· 111

display ftp client source ·························································································································· 111

iii

ftp ··························································································································································· 112

ftp client ipv6 source ······························································································································ 113

ftp client source ······································································································································ 114

ftp ipv6 ···················································································································································· 115

get ·························································································································································· 116

help ························································································································································ 118

lcd ··························································································································································· 118

ls ····························································································································································· 119

mkdir ······················································································································································ 120

newer ····················································································································································· 121

open ······················································································································································· 121

passive ··················································································································································· 122

put ·························································································································································· 123

pwd ························································································································································· 124

quit ························································································································································· 124

reget ······················································································································································· 124

rename ··················································································································································· 125

reset ······················································································································································· 126

restart ····················································································································································· 126

rhelp ······················································································································································· 127

rmdir ······················································································································································· 128

rstatus ···················································································································································· 129

status ······················································································································································ 131

system ···················································································································································· 132

user ························································································································································ 132

verbose ·················································································································································· 133

TFTP commands ······················································································· 135

TFTP client commands ·································································································································· 135

tftp ·························································································································································· 135

tftp client ipv6 source ····························································································································· 137

tftp client source ····································································································································· 138

tftp ipv6 ··················································································································································· 139

tftp-server acl ········································································································································· 140

tftp-server ipv6 acl ·································································································································· 141

File system management commands ························································ 142

cd ··························································································································································· 142

copy ························································································································································ 143

delete ····················································································································································· 146

dir ··························································································································································· 147

execute ··················································································································································· 148

fdisk ························································································································································ 148

file prompt ·············································································································································· 150

fixdisk ····················································································································································· 151

format ····················································································································································· 151

fuser ······················································································································································· 152

gunzip ····················································································································································· 153

gzip ························································································································································· 154

md5sum ················································································································································· 155

mkdir ······················································································································································ 155

more ······················································································································································· 156

mount ····················································································································································· 156

move ······················································································································································ 157

pwd ························································································································································· 158

rename ··················································································································································· 158

reset recycle-bin ····································································································································· 158

rmdir ······················································································································································· 159

sha256sum ············································································································································· 160

tar create ················································································································································ 160

tar extract ··············································································································································· 161

tar list ······················································································································································ 163

iv

umount ··················································································································································· 163

undelete ················································································································································· 164

Configuration file management commands ················································ 166

archive configuration ······························································································································ 166

archive configuration interval ················································································································· 167

archive configuration location ················································································································· 168

archive configuration max ······················································································································ 169

archive configuration server ··················································································································· 170

archive configuration server password··································································································· 172

archive configuration server user ··········································································································· 172

backup startup-configuration ·················································································································· 173

configuration commit ······························································································································ 174

configuration commit delay ···················································································································· 175

configuration encrypt ······························································································································ 175

configuration replace file ························································································································ 176

configuration replace server ··················································································································· 177

configuration replace server file ············································································································· 178

configuration replace server password ·································································································· 180

configuration replace server user ··········································································································· 180

display archive configuration ·················································································································· 181

display configuration replace server ······································································································· 182

display current-configuration ·················································································································· 184

display current-configuration diff ············································································································ 185

display default-configuration ·················································································································· 186

display diff ·············································································································································· 187

display saved-configuration ···················································································································· 188

display startup ········································································································································ 189

display this ············································································································································· 190

reset saved-configuration ······················································································································· 191

restore startup-configuration ·················································································································· 192

save ························································································································································ 193

standby auto-update config ···················································································································· 196

startup saved-configuration ···················································································································· 196

Software upgrade commands ···································································· 198

boot-loader file ······································································································································· 198

boot-loader update ································································································································· 201

bootrom backup ····································································································································· 202

bootrom restore ······································································································································ 202

bootrom update ······································································································································ 203

bootrom-update security-check enable ·································································································· 204

display boot-loader ································································································································· 204

display install active ······························································································································· 206

display install committed ························································································································ 207

display version ······································································································································· 209

display version-update-record ················································································································ 210

install activate ········································································································································· 211

install commit ········································································································································· 213

install deactivate ····································································································································· 214

reset version-update-record ··················································································································· 215

version auto-update enable···················································································································· 215

version check ignore ······························································································································ 216

GIR commands ·························································································· 218

config-end ·············································································································································· 218

display gir custom-profile ······················································································································· 218

display gir snapshot ······························································································································· 219

display gir snapshot compare ················································································································ 220

display gir system-mode ························································································································ 221

gir custom-profile ···································································································································· 222

gir snapshot add ····································································································································· 224

v

gir snapshot create ································································································································· 225

gir snapshot delete ································································································································· 225

gir system-mode maintenance ··············································································································· 226

gir system-mode maintenance maintenance-delay ················································································ 230

gir system-mode maintenance revert-delay ··························································································· 231

gir system-mode maintenance snapshot-delay ······················································································ 231

sleep instance ········································································································································ 232

Preprovisioning commands ········································································ 234

display provision failed-config ················································································································ 234

provision ················································································································································· 234

reset provision failed-config ··················································································································· 235

slot ·························································································································································· 236

Emergency shell commands ······································································ 237

copy ························································································································································ 237

delete ····················································································································································· 237

dir ··························································································································································· 238

display copyright ···································································································································· 240

display install package ··························································································································· 240

display version ······································································································································· 241

format ····················································································································································· 241

mkdir ······················································································································································ 242

more ······················································································································································· 243

move ······················································································································································ 243

pwd ························································································································································· 244

quit ························································································································································· 244

reboot ····················································································································································· 244

rmdir ······················································································································································· 244

Document conventions and icons ······························································ 246

Conventions ··················································································································································· 246

Network topology icons ·································································································································· 247

Support and other resources ····································································· 248

Accessing Hewlett Packard Enterprise Support····························································································· 248

Accessing updates ········································································································································· 248

Websites ················································································································································ 249

Customer self repair ······························································································································· 249

Remote support ······································································································································ 249

Documentation feedback ······················································································································· 249

Index ·········································································································· 251

1

Basic CLI commands

display [ | [ by-linenum ] { begin | exclude | include } ]

Use display [ | [ by-linenum ] { begin | exclude | include } to filter the output from

a display command with a regular expression.

Syntax

display command [ | [ by-linenum ] { begin | exclude | include }

regular-expression ]&<1-128>

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

command: Specifies the keywords and arguments of a display command. To display available

keywords and arguments, enter display ?.

[ | [ by-linenum ] { begin | exclude | include } regular-expression ]&<1-128>:

Specifies a maximum of 128 filter conditions.

•

by-linenum: Numbers the output lines. You need to specify this keyword in only one filter

condition.

•

begin: Displays the first line matching the specified regular expression and all subsequent

lines.

•

exclude: Displays all lines not matching the specified regular expression.

•

include: Displays all lines matching the specified regular expression.

•

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256

characters.

Usage guidelines

To quickly locate certain lines in the output from a display command, you can use regular

expressions to filter the output, and display a number before each output line. For more information

about regular expressions, see Fundamentals Configuration Guide.

If you specify multiple filter conditions, the system displays the output lines that meet all the

conditions.

A line number is a 5-character string and is typically followed by a colon (:). If you specify both the

by-linenum and begin regular-expression options, a line number might be followed by a

colon or a hyphen (-).

•

Colon—The line matches the regular expression.

•

Hyphen—The line does not match the regular expression.

Examples

# Display the lines that contain vlan in the running configuration.

<Sysname> display current-configuration | include vlan

vlan 1

vlan 999

2

port access vlan 999

# Display log entries in the log buffer that contain both SHELL and VTY.

<Sysname> display logbuffer | include SEHLL | include VTY

%Feb 6 10:38:12:320 2020 Sysname SHELL/5/SHELL_LOGIN: VTY logged in from 169.254.100.171.

%Feb 6 10:52:32:576 2020 Sysname SHELL/5/SHELL_LOGOUT: VTY logged out from

169.254.100.171.

%Feb 6 16:03:27:100 2020 Sysname SHELL/5/SHELL_LOGIN: VTY logged in from 169.254.100.171.

%Feb 6 16:44:18:113 2020 Sysname SHELL/5/SHELL_LOGOUT: VTY logged out from

169.254.100.171.

# Display the running configuration, starting from the first line that contains user-group and

numbering the output lines.

<Sysname> display current-configuration | by-linenum begin user-group

114: user-group system

115- #

116- return

display >

Use display > to save the output from a display command to a separate file.

Syntax

display command > filename

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

command: Specifies the keywords and arguments of a display command. To display available

keywords and arguments, enter display ?.

filename: Specifies the name of the file that is used to save the output, a string of 1 to 63

characters.

Usage guidelines

The display commands show the configuration, statistics, and states of the device. You can use

the display > command to save the output to a file.

If the specified file does not exist, the system creates the file and saves the output to the file. If the file

already exists, the system overwrites the file.

Examples

# Save VLAN 1 settings to a separate file named vlan.txt.

<Sysname> display vlan 1 > vlan.txt

# Check the content of the vlan.txt file.

<Sysname> more vlan.txt

VLAN ID: 1

VLAN type: Static

Route interface: Not configured

3

Description: VLAN 0001

Name: VLAN 0001

Tagged ports: None

Untagged ports:

HundredGigE1/0/2

display >>

Use display >> to append the output from a display command to the end of a file.

Syntax

display command >> filename

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

command: Specifies the keywords and arguments of a display command. To display available

keywords and arguments, enter display ?.

filename: Specifies the name of the file that is used to save the output, a string of 1 to 63

characters.

Usage guidelines

The display commands show the configuration, statistics, and states of the device. You can use

display >> to save the output to a file.

If the specified file does not exist, the system creates the file and saves the output to the file. If the file

already exists, the system appends the output to the end of the file.

Examples

# Append the VLAN 999 settings to the end of the vlan.txt file.

<Sysname> display vlan 999 >> vlan.txt

# Check the content of the vlan.txt file.

<Sysname> more vlan.txt

VLAN ID: 1

VLAN type: Static

Route interface: Not configured

Description: VLAN 0001

Name: VLAN 0001

Tagged ports: None

Untagged ports:

HundredGigE1/0/2

VLAN ID: 999

VLAN type: Static

Route interface: Configured

4

IPv4 address: 192.168.2.1

IPv4 subnet mask: 255.255.255.0

Description: For LAN Access

Name: VLAN 0999

Tagged ports: None

Untagged ports:

HundredGigE1/0/2

display history-command

Use display history-command to display all commands that are saved in the command history

buffer for the current CLI session.

Syntax

display history-command

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

The system automatically saves commands you have successfully executed to the command history

buffer for the current CLI session. You can view them and execute them again.

By default, the system can save up to 10 commands in the buffer. You can use the

history-command max-size command to change the buffer size. To buffer a new command

when the buffer is full, the system deletes the oldest command entry in the buffer.

All commands in the command history buffer for the current CLI session will be cleared when you log

out.

If the command history buffer contains password configuration commands, the passwords are

displayed as asterisks (******) for security purposes.

Examples

# Display all commands saved in the command history buffer for the current CLI session.

<Sysname> display history-command

system-view

vlan 2

quit

Related commands

history-command max-size

display history-command all

Use display history-command all to display all commands that are saved in the command

history buffer for all CLI sessions.

Syntax

display history-command all

5

Views

Any view

Predefined user roles

network-admin

Usage guidelines

The system automatically saves commands successfully executed by users to the command history

buffer for all CLI sessions. Users can view them but cannot recall them from the buffer.

Up to 1024 commands can be saved in the command history buffer. To buffer a new command when

the buffer is full, the system deletes the oldest command entry in the buffer.

A user logout does not cause the system to delete commands from the history buffer for all CLI

sessions.

If the command history buffer contains password configuration commands, the passwords are

displayed as asterisks (******) for security purposes.

Examples

# Display all commands saved in the command history buffer for all CLI sessions.

<Sysname> display history-command all

Date Time Terminal Ip User

02/16/2020 20:03:33 vty0 192.168.1.26 **

Cmd:dis his all

02/16/2020 20:03:29 vty0 192.168.1.26 **

Cmd:sys

Table 1 Command output

Field

Description

Date Date when the command was executed.

Time Time when the command was executed.

Terminal User line used by the user.

Ip IP address of the terminal used by the user.

User Username used by the user if the user login authentication mode is

scheme. If the login authentication mode is none or password, this field

displays **.

Cmd Command string entered by the user.

Related commands

display history-command

display hotkey

Use display hotkey to display hotkey information.

Syntax

display hotkey

Views

Any view

6

Predefined user roles

network-admin

network-operator

Examples

# Display hotkey information.

<Sysname> display hotkey

----------------- Hotkeys -----------------

-Defined function hotkeys-

CTRL_A Move the cursor to the beginning of the line.

CTRL_B Move the cursor one character to the left.

CTRL_C Stop the current command.

CTRL_D Erase the character at the cursor.

CTRL_E Move the cursor to the end of the line.

CTRL_F Move the cursor one character to the right.

CTRL_H Erase the character to the left of the cursor.

CTRL_K Abort the connection request.

CTRL_N Display the next command in the history buffer.

CTRL_P Display the previous command in the history buffer.

CTRL_R Redisplay the current line.

CTRL_V Paste text from the clipboard.

CTRL_W Delete the word to the left of the cursor.

CTRL_X Delete all characters from the beginning of the line to the cursor.

CTRL_Y Delete all characters from the cursor to the end of the line.

CTRL_Z Return to the User View.

CTRL_] Kill incoming connection or redirect connection.

ESC_B Move the cursor back one word.

ESC_D Delete all characters from the cursor to the end of the word.

ESC_F Move the cursor forward one word.

ESC_N Move the cursor down a line.

ESC_P Move the cursor up a line.

ESC_< Move the cursor to the beginning of the clipboard.

ESC_> Move the cursor to the end of the clipboard.

-Defined command hotkeys-

CTRL_G display current-configuration

CTRL_L display ip routing-table

CTRL_O undo debugging all

-Undefined hotkeys-

CTRL_T NULL

CTRL_U NULL

Related commands

hotkey

7

hotkey

Use hotkey to configure a hotkey.

Use undo hotkey to restore the default.

Syntax

hotkey hotkey { command | function function | none }

undo hotkey hotkey

Default

Table 2 shows the default definitions for hotkeys.

Table 2 Default definitions for hotkeys

Hotkey

Function or command

Ctrl+A move_the_cursor_to_the_beginning_of_the_line: Moves the cursor to the

beginning of a line.

Ctrl+B move_the_cursor_one_character_to_the_left: Moves the cursor one

character to the left.

Ctrl+C

stop_the_current_command: Stops the current command.

Ctrl+D

erase_the_character_at_the_cursor: Deletes the character at the cursor.

Ctrl+E move_the_cursor_to_the_end_of_the_line: Moves the cursor to the end of a

line.

Ctrl+F move_the_cursor_one_character_to_the_right: Moves the cursor one

character to the right.

Ctrl+G

display current-configuration

: Displays the running

configuration.

Ctrl+H erase_the_character_to_the_left_of_the_cursor: Deletes the character to the

left of the cursor.

Ctrl+K abort_the_connection_request: Aborts the connection request.

Ctrl+L

display ip routing-table

: Displays the IPv4 routing table information.

Ctrl+N display_the_next_command_in_the_history_buffer: Displays the next

command in the history buffer. The password configuration commands will be

skipped.

Ctrl+O

undo debugging all

: Displays all debugging functions.

Ctrl+P display_the_previous_command_in_the_history_buffer: Displays the

previous command in the history buffer. The password configuration commands

will be skipped.

Ctrl+R

redisplay_the_current_line: Redisplays the current line.

Ctrl+T

N/A

Ctrl+U

N/A

Ctrl+V paste_text_from_the_clipboard: Pastes text from the clipboard.

Ctrl+W delete_the_word_to_the_left_of_the_cursor: Deletes the word to the left of

the cursor.

Ctrl+X delete_all_characters_from_the_beginning_of_the_line_to_the_cursor:

Deletes all characters to the left of the cursor.

Ctrl+Y

delete_all_characters_from_the_cursor_to_the_end_of_the_line: Deletes

8

all characters from the cursor to the end of the line.

Ctrl+Z

return_to_the_User_View: Returns to user view.

Ctrl+] kill_incoming_connection_or_redirect_connection: Terminates the current

connection.

Esc+B

move_the_cursor_back_one_word: Moves the cursor back one word.

Esc+D delete_all_characters_from_the_cursor_to_the_end_of_the_word: Deletes

all characters from the cursor to the end of the word.

Esc+F

move_the_cursor_forward_one_word: Moves the cursor forward one word.

ESC_N move_the_cursor_down_a_line: Moves the cursor down a line.

This hotkey is effective before you press Enter.

ESC_P move_the_cursor_up_a_line: Moves the cursor up a line.

This hotkey is effective before you press Enter.

ESC_< move_the_cursor_to_the_beginning_of_the_clipboard: Moves the cursor to

the beginning of the clipboard.

ESC_> move_the_cursor_to_the_end_of_the_clipboard: Moves the cursor to the end

of the clipboard.

Views

System view

Predefined user roles

network-admin

Parameters

hotkey: Specifies a hotkey. To display the supported hotkeys, enter hotkey ? or see Table 2.

command: Specifies the command to be assigned to the hotkey.

function function: Specifies the function to be assigned to the hotkey. To display the

supported functions, enter hotkey hotkey function ? or see Table 2.

none: Removes the command or function assignment for the hotkey. After you remove the

assignment for a hotkey, pressing the hotkey does not execute any command or function.

Usage guidelines

The device supports a set of hotkeys. Pressing a hotkey executes the command or function assigned

to the hotkey. You can configure all the hotkeys except Ctrl+].

A hotkey can correspond to only one command or function. If you assign multiple commands or

functions to the same hotkey, the most recently assigned command or function takes effect.

A command or function can be assigned to multiple hotkeys. You can use any of those hotkeys to

execute the command or function.

If a hotkey is also defined by the terminal software you are using to interact with the device, the

terminal software definition takes effect.

Examples

# Assign move_the_cursor_to_the_beginning_of_the_line function to hotkey Ctrl+U.

<Sysname> system-view

[Sysname] hotkey ctrl_u function move_the_cursor_to_the_beginning_of_the_line

# Disable the configurable command or function assigned to hotkey Ctrl+A.

<Sysname> system-view

[Sysname] hotkey ctrl_a none

9

Related commands

display hotkey

quit

Use quit to return to the upper-level view.

Syntax

quit

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

Executing this command in user view disconnects you from the device.

Examples

# Return from HundredGigE 1/0/1 interface view to system view and then to user view.

[Sysname-HundredGigE1/0/1] quit

[Sysname] quit

repeat

Use repeat to repeat commands in the command history buffer for the current CLI session.

Syntax

repeat [ number ] [ count times ] [ delay seconds ]

Views

Any view

Predefined user roles

network-admin

Parameters

number: Specifies the number of the most recently executed commands in the command history

buffer for the current CLI session that you want to execute. The value range is 1 to 256. The default

is 1.

count times: Specifies the number of times that you want to execute the commands. The value

range is 0 to 4294967295. The default is 0. If you do not specify this option, the system keeps

executing the commands until you press the escape key to terminate the execution.

delay seconds: Specifies the time (in seconds) for the system to wait before executing the

commands again. The value range is 0 to 4294967295. The default is 1.

Usage guidelines

To repeat a command, first enter the view for the command. To repeat multiple commands, first enter

the view for the first command.

10

The repeat command executes commands in the order they were executed.

The system waits for your interaction when it repeats an interactive command.

The system does not repeat but skips password configuration commands.

The number of commands to be repeated in the command history buffer is determined by the

minimum value of the following:

•

Number of the most recently executed commands in the command history buffer specified by

the repeat command.

•

Size of the command history buffer specified by the history-command max-size

command.

•

Number of the commands in the command history buffer.

Examples

# Configure the system to execute the two most recently executed commands (display

cpu-usage and display clock) three times at an interval of 10 seconds.

<Sysname> repeat 2 count 3 delay 10

<Sysname> display cpu-usage

Slot 1 CPU 0 CPU usage:

33% in last 5 seconds

32% in last 1 minute

33% in last 5 minutes

<Sysname> display clock

07:02:18.230 UTC Thu 02/19/2020

<Sysname> display cpu-usage

Slot 1 CPU 0 CPU usage:

33% in last 5 seconds

32% in last 1 minute

33% in last 5 minutes

<Sysname> display clock

07:02:28.263 UTC Thu 02/19/2020

<Sysname> display cpu-usage

Slot 1 CPU 0 CPU usage:

33% in last 5 seconds

32% in last 1 minute

33% in last 5 minutes

<Sysname> display clock

07:02:38.293 UTC Thu 02/19/2020

Related commands

display history-command

escape-key

history-command max-size

11

return

Use return to return to user view from any other view except Tcl configuration view and the Python

shell.

Syntax

return

Views

Any view except user view, Tcl configuration view, and the Python shell

Predefined user roles

network-admin

network-operator

Usage guidelines

In any view except user view, Tcl configuration view, and the Python shell, pressing Ctrl+Z has the

same effect as the return command.

To return to user view from Tcl configuration view, use the tclquit command.

To return to user view from the Python shell, use the exit() command.

Examples

# Return to user view from HundredGigE 1/0/1 interface view.

[Sysname-HundredGigE1/0/1] return

screen-length disable

Use screen-length disable to disable pausing between screens of output for the current CLI

session.

Use undo screen-length disable to enable pausing between screens of output for the

current CLI session.

Syntax

screen-length disable

undo screen-length disable

Default

The default depends on the configuration of the screen-length command in user line view.

The following are the default settings for the screen-length command:

•

Pausing between screens of output.

•

Displaying up to 24 lines on a screen.

Views

User view

Predefined user roles

network-admin

12

Usage guidelines

If you disable pausing between screens of output, all output is displayed. The screen is refreshed

continuously until the final screen is displayed. As a best practice, disable pausing between screens

of output when you collect information and enable pausing between screens of output when you view

information.

This command takes effect only for the current CLI session. When you are logged out, the default is

restored.

Examples

# Disable pausing between screens of output for the current CLI session.

<Sysname> screen-length disable

Related commands

screen-length

system-view

Use system-view to enter system view from user view.

Syntax

system-view [ exclusive | immediate | private ]

Views

User view

Predefined user roles

network-admin

network-operator

Parameters

exclusive: Specifies exclusive-mode system view.

immediate: Specifies real-time-mode system view.

private: Specifies private-mode system view.

Usage guidelines

You can enter real-time-mode system view, exclusive-mode system view, or private-mode system

view.

•

In real-time-mode system view and its lower-level views, settings are written to the running

configuration and take effect immediately.

•

In exclusive-mode system view, private-mode system view, and their lower-level views, settings

are saved to the target configuration, which takes effect after being committed by using the

commit command.

Only one user can enter exclusive-mode system view or its lower-level views.

•

When a user is in an exclusive-mode view, users in private-mode views cannot commit their

target configuration command lines.

•

When no user is in an exclusive-mode view, users in private-mode views can commit their

respective target configuration command lines. However, only one user in a private-mode view

can commit target configuration command lines at a time.

Unless otherwise stated, entering system view refers to entering real-time-mode system view.

Private-mode views and exclusive-mode views have a leading tilde sign (~) in their prompts as

compared to their counterpart real-time-mode views.

13

Examples

# Enter exclusive-mode system view.

<Sysname> system-view exclusive

Info: The current configuration is locked.

~[Sysname]

Page is loading ...

Aruba R9F20A Reference guide

Aruba R9F20A Reference guide

Related papers

Other documents