iHome IBT88 User manual

Maintenance

Place the unit on a level surface away from sources of direct sunlight

or

excessive heat.

Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth

or

other protective material should be placed between

it

and the furnrture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning

agents, such as Benzene, thinner

or

similar materials can damage the surface

of

the unit.

A

Consumer

Guide

to

Product

Safety

IMPORTANT

SAFETY

INSTRUCTIONS

When used

in

the directed manner, this unit has been designed and manufactured

to

ensure

your personal

safety.

However,

improper

use

can

resutt

in

potential electrical shock or

fire

hazards.

Please read

all

safety and operating instructions carefully before installation and use, and keep

these instructions handy for future reference. Take special note

of

all

warnings listed

in

these

instructions and on the unit.

1 .

Water

and

Moisture

-The unrt should not

be

used near water. For example: near a

bathtub, washbowl, kitchen sink, laundry tub, swimming pool

or

in

a wet basement.

2.

Ventilat

i

on

-The

unit should

be

srtuated so that its location

or

position does not interfere

with

rts

proper ventilation. For example, it should not

be

situated on a bed, sofa, rug

or

similar surface that may block ventilation openings. Also,

rt

should not be placed

in

a buitt-in

installation, such as a bookcase

or

cabinet, which rnay impede the flow of air through the

ventilation openings.

3.

Heat

-The

unrt

should be situated away

from

heat sources such as radiators, heat registers,

stoves

or

other appliances (including amplifiers) that procuce heat.

4.

Power

Sources

-The unit should be connected to a power supply only

of

the type

described

in

the operating instructions

or

as marked on the appliance.

5.

Power-Cable

Protection

-Power supply cables should

be

routed so that they are not

likely

to

be

walked on

or

pinched by items placed upon

or

against them.

It

is always best

to

have a clear area from where the cable exits the unit

to

where

it

is

plugged into

an

AC

socket.

6.

Cleaning

-The unit should be cleaned only as recommended. See the Maintenance

section

of

this manual for cleaning instructions.

7.

Objects

and

Liquid

Entry

-Care should

be

taken so that objects

do

not

fall

and liquids

are not spilled into any openings

or

vents located on the product.

8.

Attachments

-Do not use attachments not recommended by the product manufacturer.

9.

Lightning

and

Power

Surge

Protection

-Unplug the unit from the wall socket and

disconnect the antenna or cable system during a

li

ghtning storm or when

rt

is

left unattended

and unused for long periocs of time.

This

will

prevent damage

to

the procuct due

to

lightning

and power-line surges.

10

.

Overloading

-Do not overload wall sockets, extension cords,

or

integral convenience

receptacles as this can resutt

in

a risk of fire or electric shock.

11.

Damage

Requiring

serv

i

ce

-The unit should be serviced by qualified service personnel

when:

A. the power supply cable

or

plug has been damaged.

B. objects have fallen into

or

liquid has been spilled into the enclosure.

C.

the unit has been exposed

to

rain.

D.

the unrt has been dropped

or

the enclosure damaged.

E.

the unit exhibits a marked change in performance

or

does not operate normally.

12.

Periods

of

Nonuse

-

If

the unrt is to be left unused for

an

extended perioc of time, such

as

a month

or

longer,

the power cable should be unplugged from the

unrt

to prevent damage

or

corrosion.

13.

Servic

i

ng

-The

user

should

not attempt to service the unit beyond those

methOCs

described

in

the

user's

operating instructions. Servce methocs not

covered

in

the

operati

ng

instruclions

should be referred

to

qualified service personne

l.

Questions?

Vi

sit

www

.

ihomeaud

i

o.com

or

call

1-800-288-2792

Toll

Free

Limited

1

Year

Warranty

Information

iHome Products, a division

of

SDI

Technologies Inc. (hereafter referred

to

as

SDI),

warrants this

product

to

be

free from defects

in

workmanship and materials, under normal use and conditions,

for a period

of

one

(1)

year from the date

of

original purchase.

Should this procuct

fail

to

function

in

a satisfactory manner,

rt

is

best to first return

it

to

the store

where

it

was originally purchased. Should this

fail

to resolve the matter and service still be required

by

reason

of

any

defect or malfunction during the warranty perioc,

SDI

will

repair

or;

at

rts

discretion,

replace this product without charge. This decision

is

subject

to

verification

of

the defect or

malfunctkm upon deliv,.Y of this product to the Factory Service Center authorized by

SD

I Customer

Servce. The product

must

include

proof of purchase, induding date of

purchase.

An

out-of-warranly

fee for service will be charged for units that are received without proof of purchase.

Before returning this product for service, please first replace the batteries

(if

applicable) with fresh

ones, as exhausted

or

defective batteries are the most common cause

of

problems encountered.

If

service is still required:

1.

Gail

SDI

Customer Service at 1-800-288-2792 for Return Authorization and for the address

of

the Factory Service Center.

2.

Remove the batteries

(if

applicable) and

pack

the unit

in

a well padded, heavy corrugated box.

SDI

is

not responsible for damage that occurs during shipping to the Factory Service Center.

3.

Enclose a photocopy of your sales receipt, credit card statement,

or

other proof

of

the date

of purchase, if within the warranty period. Also include your name and address information, a

brief description for why the unit is being returned, and the return authorization number.

No

unit

can be processed without a return authorization number.

4.

Write the return authorization number on the side

of

the shipping package and send the unit

prepaid and insured

to

the Factory Service Center address authorzed by

SDI

Customer Service.

Disclaimer

of

Warranty

NOTE:

This warranty is valid only if the procuct is used for the purpose for which it was designed.

It

does not cover

(i)

procucts which have been damaged by negligence

or

willful actions, misuse

or

accident, or which have been modified

or

repaired by unauthorized persons;

(iO

cracked

or

broken cabinets, or unrts damaged by excessive heat;

(iii)

damage

to

digital media players, CD's

or

tape cassettes

(if

applicable);

(iv)

the cost of shipping this product to the Factory Service Center

and its return

to

the owner.

This warranty is valid only

in

the United States of America and does not extend to owners

of

the

product other than

to

the original purchaser. In no event will

SDI

or any of its affiliates, contractors,

resellers, their officers, directors,

shareholders, members

or

agents

be

liable

to

you

or

any third party for any consequential or

incidental damages, any lost profrts, actual, exemplary

or

punitive damages. (Some states

do

not ailow limrtations on implied warranties or exclusion

of

consequential damages,

sc

these

restrictions may not apply

to

you.) This warranty gives you specific legal rights, and you may alsc

have other rights which vary from state

to

state.

Your acknowledgement and agreement

to

fully and completely abide by the above mentioned

disclaimer

of

warranty

is

contractually binding to you upon your transfer

of

currency (money order,

cashier's check, or credit card) for purchase of your

SDI

procuct.

iBT

BB

-012113-A

All

rights reserved

Questions?

Visit

www.ihomeaudio.com

or

call

1-800-288-2792

Toll

Free

Print

ed

in

China

I

irbme

. Mode/iBT88

Blue

tooth

Rechargeable

Speakers

System

I

Questions?

Visit

www.ihomeaudio.com

FCC

Information

FCC

Radiation

Exposure

Statement

This

equ

ip

ment

comp

lies with F

CC

RF radiation

expos

ur

e limits set forth

for

an

FCC

ID

:EMOIBT88

IC:986B-IBT88

uncontrolled environment. This transmitter must n

ot

be co-located

or

opera

ting in conju

nct

ion with any other

ante

nn

a

or

tra

nsm

itte

r.

This Device

comp

li

es

wit

h R

SS-2

10

of

the IC Rules;

Ope

r

at

ion is

sub

ject to t

he

fo

ll

owing

two

conditions:

(1)

This device m

ay

n

ot

cause inte

rf

erence and

(2) This

dev

i

ce

mu

st

accept any inte

rf

er

ence

received,

inc

luding interfer

ence

that

may

cau

se

un

des

ired

opera

ti

on

This device

complies

with

Part 15

of

the

FCC Rules, operation is

subject

to

the

following

two

cond

i

tions

: (1) This device may

not

cause

harmful

interference, and

{2)

this

device

must

accept

any

interference received, i

nclud

ing interference

that

may

cause

undesired

operation.

• Wamtng: Changes

or

modifications to thts unit not expressly approved by the

party

responstble for compliance

cou

ld void the u

ser's

authority

to

operate the

eq

uipment.

• NO

TE

:

This

eq

uipment

has

bee

n tested and found to comply with

the

limits f

or

a Class B digi

ta

l device,

pursuant

to

P

art

15

of the F

CC

Rules.

These limits are designed to

provide

r

easo

n

ab

le protection against ha

nn

ful in

te

rf

er

ence

in a residential

installation. Th

is

equipment

genera

tes, uses

and

can

radiate radio

frequency

ene

r

gy

and, if

no

t installed and

used

in

accordance

with the instructions,

may

cause ha

nn

ful

in

te

rf

ere

n

ce

to radio communications.

However, there is no guarantee that interference wi

ll

not

occur

in a pa

rt

icular installation. If this

eq

uipment

does

cause harmful interter

ence

to radio or television reception,

wh

i

ch

can be

determ

ined

by

turning the

equipment o

ff

and on, the user is encouraged to try to correct the intetfer

ence

by

one

or

more

of

the following

measures:

• Reorie

nt

or

relocate the receiving a

nt

enna.

• Increase the separation between the

equipment

and

receiver.

•

Connect

the equipment into

an

ou

tl

et

on

a circuit differ

ent

fr

om

that

to

which

the

receiver is connected.

• Consult the

dealer

or an experienced radiofTV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet

appareil numerique

de

Ia

classe 8

est

con

f

orme

a Ia

norma

NMB-003

du

Canada

IMPORTANT

Read

befor

e pr

oceed

i

ng

If you have

any

question regarding the operation

or

use

of

this

produc

t, please visit

www

.ih

omeaud

lo.

com

to

view

answers

to

frequently

asked

questions.

To learn more

about

this

and

other

iHome

products, pl

ease

visit us

online

at

www

.i

hom

ea

ud

lo.

com

For

Model

s That Use

Li

thi

um

Batt

eri

es:

• Lithium batteries

can

explode or cause

bums

if

disassembled, shorted, r

echarged

, exposed to water, fire,

or high temperatures &

not

h

andled

app

ropriately

• Do

not

place

loose

batteries in a pocket, purse,

or

other container containing metal objects,

do

not mix with

used

or

other battery types,

or

store with hazardous

or

combustible materials.

• Store in cool, dry, ventilated area.

• Follow applicable laws

and

regulations for transport and disposal.

GJ

~~,-·~~·

GJ

1--------------------,

Bluetooth

Mode

TROUBLESHOOTING

•

If

there is no

sound

coming

through speaker,

try

turning

the

speaker

OFF,

then

ON

again

• ALWAYS

connect

audio cable

BEFORE

turning

speaker

ON

GJ

Aux-in Mode

ri

~

Laptop

Right Speaker

Off/Biuetooth/Aux

Switch+---,

i~

off

I*

I

aux

LED---

Speaker In Speaker

Out

3.5mm audio cable

3.5mm audio plug

Combination cable Charging the iBT88

Using

Bluetooth

with

the

iBT88

• Plug one end of the included 3.5mm audio cable into the speaker

out

jack

on

the Right Speaker and the other end into the speaker in

jack

on

the Left Speaker.

• Slide the Off/Biuetooth/Aux Switch

(off

I * I

aux)

on

the Right Speaker

to the Bluetooth position ( * ). The light will flash blue

as

the speaker

attempts to auto-link with the last previously linked unit

in

range

(30 feet). If no device

is

found within

10

seconds, the light will flash

blue

and

red

to indicate pairing attempt.

• Place your audio device

in

Bluetooth mode (often found

in

the

device's Settings or Tools menu) and make it "discoverable". "iHome

iBT88" should appear

on

your device. If "Not Paired, "Not

Connected" or similar message appears, select "iHome iBT88" to

connect.

• Once paired, the light will glow solid blue and a confirmation beep

will sound.

If

pairing

is

not successful, turn the power

OFF

on

the

Right Speaker and repeat pairing procedure.

•

To

listen to Bluetooth audio, make sure the Right Speaker

is

in

Bluetooth mode

(*)and

the Left Speaker

is

connected.

• Control Bluetooth audio from your device.

Remember to turn off the speaker and your device after listening.

NOTE: When

unit

is

charging, the blue

light

will

appear magenta.

Using

the

iBT88

with

Aux

Devices

• Plug one end of the included 3.5mm audio cable into the speaker

out

jack

on

the Right Speaker

and

the other end into the speaker

in

jack

on

the Left Speaker.

• Connect the stereo 3.5mm audio plug

on

the combination cable to

the headphone jack or line-out of any audio device and connect the

micro-USB plug into the

charging

I aux-in

jack

on

the Right

Speaker.

• Slide the Off/Biuetooth/Aux Switch

(off

I*

I

aux)

switch

on

the Right

Speaker to the

aux

position. The blue power light will come

on

.

-Press play

on

your audio device

and

adjust its volume to listen to

audio.

Remember to turn off the speaker

and

your device after listening.

Charging

the

iBT88

The iBT88

is

powered by a rechargeable battery

in

the Right Speaker.

When the light flashes

red

, or if you start to notice sound distortion at

higher volumes, it's time

to

recharge the battery.

• Connect a micro-USB plug to the input jack

on

the Right Speaker.

• Connect the larger USB plug to a powered USB port, such

as

that

on

a computer. The light

on

the speaker will turn to solid

red

while

charging

and

turn off when fully charged.

Note:

you

can

continue

to

listen

to

the speakers

while

the

Right

Speaker

is

charging.

The rechargeable battery in

your

speaker can

only

be replaced

by

iHome

Consumer

Repair Department.

iBT88

QUICK

BLUETOOTH

CONNECTION

GUIDE

0Biuetooth

BEFORE YOU START

Your

Bluetooth

device

(cellphone,

MP3

player,

computer

,

etc.)

must

support

the

A2DP

Bluetooth

profile

(commonly

known

as

stereo

audio

profile)

to

work

with

the

iHome

iBT88

.

Many

of

the

latest mobile phones

and

PCs

with built-in Bluetooth functionality will support this profile. For

accurate information about your product,

please

refer

to

your

Bluetooth

device's

user

manual

for

details

on

the

Bluetooth

profiles

it

supports

and

on

how

to

set

the

device's

Bluetooth

pairing/searching/setup

mode.

ABOUT

PAIRING

Pairing

is

the

term

used

when

wirelessly

connecting

two

Bluetooth

devices

for

the

first

time.

This

allows

the

devices

to

"see"

each

other

and

creates

a

unique

lasting

connection

between

the

specific

devices.

PAIRING

&

LINKING

YOUR

BLUETOOTH

DEVICE

WITH

THE

iBT88

1)

Make

sure

your

Bluetooth

device

is

fully

charged.

Turn

it

on.

--~

...!'!!....:1

~

.

•------,

2)

Turn

on

Bluetooth

functionality

on

your

Bluetooth

device.

Typically,

Bluetooth

2

controls

are

found

on

the

device's

tools

or

settings

menu

(see

your

user

manual).

Turn

on

Bluetooth

connectivity

and

make

your

device

"discoverable".

~

..

,,._

\

3)

Plug one end

of

the included 3.5mm audio cable into the speaker out

jack on the Right Speaker and the other end into the speaker

in

jack on

the Left Speaker.

Slide

the

Off/Biuetooth/Aux

Switch

on

the

Right

Speaker

to

the

Bluetooth

position

( *

).

The

unit

will

turn

on

and

attempt

to

auto

link

to

a

previously

paired

device

for

10

seconds,

indicated

by

the

Indicator Light

on

the

3a

unit

flashing

blue.

If a

linked

device

is

found,

the

indicator

will

glow

solid

blue.

4)

If

no

linked

device

is

found,

the

unit

will

enter

pairing

mode,

indicated

by

the

Indicator

Light

on

the

unit

flashing

blue

and

red

while

the

unit

attempts

to

pair.

"iHome

iBT88"

should

appear

on

your

device's

menu

. If

"Not

Paired",

"Not

Connected"

or

similar

message

appears,

tap

on

the

"iHome

iBT88"

to

begin/complete

pairing.

If

your

device

asks

for

a

password,

enter

1234

on

the

keyboard

of

your

device.

If

no

device

is

paired

within

2

minutes,

the

unit

will

revert

3b

to

auto

link

mode.

To

retry

pairing,

move

the

Off/Biuetooth/Aux

Switch

to

the

OFF

position

(off)

then

move

it

back

to

the

Bluetooth

position(*).

NOTE:

When

unit

is

charging,

the

blue

light

will

appear

magenta.

5)

Once

paired

with

a

device,

the

Indicator

Light

on

the

unit

will

glow

blue

steadily.

There

should

be

an

indication

on

your

device

that

pairing

is

complete.

On

some

devices,

you

must

then

select

"Use

as

Audio

Device"

or

similar

on

the

device's

Bluetooth

menu.

Once

paired,

your

device

should

link

to

the

iBT88

whenever

within

range.

6)

Pairing

remains

intact

when

the

iBT88

and/or

the

Bluetooth

device

is

powered

off

or

is

taken

out

of

link

range

(about

30

feet).

The

iBT88

supports

auto-linking

and

will

automatically

re-establish

an

active

connection

when

your

Bluetooth

device

returns

within

range.

7)

The

the

iBT88

is

powered

on

it

will

automatically

try

to

re-establish

a

link

with

the

most

recently

linked

Bluetooth

device.

If

your

device

does

not

support

auto-linking

OR

was

not

the

last

linked

to

the

iBT88,

you

must

re-link

manually

by

selecting

iBT88

from

the

Bluetooth

device's

menu

on

your

Bluetooth

device.

8)

When

you

power

ON

the

speaker,

it

will

automatically

link

with

the

previously

paired

Bluetooth

device

as

long

as

that

device

is

still

within

range

(about

30

feet).

So,

to

pair

with

a different

device

you

must

turn

off

the

Bluetooth

capability

of

the

already

paired

device.

Simple assembly

Phone

not

included

iDS1

Portable

Stand

(for

tablets

and/or

smartphones)

For

only

$4.99

we'll

send

you

a portable stand that supports most

tablets

and

smartphones.

Easy

setup,

packs

flat for travel.

$4.99

includes

shipping

and

handling.

ORDERS

SHIPPED

TO

NJ,

TX,

WA

and

Ml

ARE

SUBJECT

TO

STATE

AND

LOCAL

SALES

TAXES

·Portable

stand

supports

tablets,

smartphones

and

other

devices

• Packs flat for easy portability

order online:

www.ihomeaudio.com

(order

iDS

1}

order

by

phone:

toll

free

1-800-288-2792 (order

iDS1}

Offer available

only

in

continental United States

Shipment: allow

up

to

30 days

Offer valid

while

supplies last.

Discount

on

Your

Purchase

FOR

1

0°/o

OFF

YOUR

PURCHASE,

VISIT

iHOMEAUDIO.COM

AND

ENTER

THIS

CODE:

iHOME1

OOFF

Discount Offer expires 12/31/14

I I

•

(])

*Offer available

only

in continental

US.

Shipment: allow

up

to

30 days

Offer valid

while

supplies last.

Condition

of

Sale:

Replacements only

USB

adaptor

For

only

$14.99,

we'll

send

you

a

USB

AC

adaptor that lets you

charge

your

iPhone,

iPod

or other device by plugging into

an

outlet.

ORDERS

SHIPPED

TO

NJ,TX,

WA

and

Ml

ARE

SUBJECT

TO

STATE

AND

LOCAL

SALES

TAXES

free shipping &

handling

• Prongs

fold

for

easy

storage

• Fits all standard outlets and standard

USB

plugs

·Charge

your

iPhone, iPod

or

other

device

• Does NOT charge iPad models

order online: www.ihomeaudio.com (order iADBT52)

order

by

phone:

toll

free 1-800-288-2792 (order iADBT52)

•

iPhone, iPod and iPad are registered trademarks

owned

and licensed

from

I

Apple, Inc.

in

the

U.S. and

in

other

countries

iHome IBT88 User manual

iHome IBT88 User manual

Related papers

Other documents