Manual - M4104 AC Power Supply for PT600R
Module Description:
General AC power supply
Isolation None
Input 90-260VAC
50/60Hz
0.5A
Total Output 12VDC
1.5A
Auxiliary Output 12VDC
1.0A Fused
Caution: Isolate mains power supply before removing covers.
Insert the module as shown on page 24 of the Quickstart manual and connect the mains cable as shown
below.
Module Connections
PT Limited www.ptglobal.com
A Active, Live, Load
N Neutral
E Earth
Page 1 of 1. Rev.1 2013-07-024 sme
Warning. This is a class A product. In a
domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.