Black & Decker Black + Decker BDEMS600 Mouse 1.2A Corded Single Speed Owner's manual

Category
Power tools
Type
Owner's manual

This manual is also suitable for

To register your new product, visit
www.BlackandDecker.com/NewOwner
KEY INFORMATION YOU SHOULD KNOW:
•Donotpushdown—letthesanderdothework.
•Extendeddrywallsandingisnotrecommendedforthisproduct.
INSTRUCTION MANUAL
MOUSE SANDER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you cant find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
BDEMS600
2
GENERAL POWER TOOL
SAFETY RULES
WARNING:Read all safety warnings
and all instructions.Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b)Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.Power tools create sparks which
may ignite the dust or fumes.
c)Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a)Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c)Do not expose power tools to rain
or wet conditions.Water entering
a power tool will increase the risk of
electric shock.
d)Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e)
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f)If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter
(GFCI) protected supply.Use of a
GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a)Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication.A moment of
inattention while operating power tools
may result in serious personal injury.
b)Use personal protective equipment.
Always wear eye protection.Protective
equipment such as dust mask, nonskid
safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c)Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to power
source and/ or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the
switch or energizing power tools that
have the switch on invites accidents.
d)Remove any adjusting key or
wrench before turning the power
tool on.A wrench or a key left
attached to a rotating part of the power
tool may result in personal injury.
e)Do not overreach. Keep proper
footing and balance at all times.This
enables better control of the power tool
in unexpected situations.
f)Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts.Loose clothes, jewelry or
long hair can be caught in moving parts.
g)If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
4)POWER TOOL USE AND CARE
a)
Do not force the power tool. Use
SAFETY GUIDELINES - DEFINITIONS
Itisimportantforyoutoreadandunderstandthismanual.Theinformationitcontains
relatestoprotectingYOURSAFETYandPREVENTINGPROBLEMS.Thesymbols
belowareusedtohelpyourecognizethisinformation.
DANGER: Indicatesanimminently hazardoussituationwhich,if notavoided,will
resultindeathorseriousinjury.
WARNING: Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,could
resultindeathorseriousinjury.
CAUTION: Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,may
resultinminorormoderateinjury.
NOTICE: Usedwithoutthesafetyalertsymbolindicatespotentiallyhazardous
situationwhich,ifnotavoided,mayresultinpropertydamage.
the correct power tool for your
application.The correct power tool will
do the job better and safer at the rate
for which it was designed.
b)Do not use the power tool if the
switch does not turn it on and
off.Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c)Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d)Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e)Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f)Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g)Use the power tool, accessories
and tool bits, etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
5) SERVICE
a)
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
Specific Safety RuleS
• Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord.Contactwith
a“live”wirewillmakeexposedmetalpartsof
thetool“live”andshocktheoperator.
WARNING: ALWAYS use safety
glasses. Everyday eye glasses are NOT
safety glasses. Also use face or dust
mask if cutting operation is
dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA
Z94.3)
ANSI S12.6 (S3.19) hearing protection
NIOSH/OSHA/MSHA respiratory protection
WARNING: Some dust created by
power sanding, sawing, grinding, drilling,
and other construction activities
contains chemicals known to the State of
California to cause cancer, birth defects
or other reproductive harm. Some
examples of these chemicals are:
•leadfromlead-basedpaints,
•crystallinesilicafrombricksandcement
andothermasonryproducts,and
•arsenicandchromiumfromchemically-
treatedlumber.
Yourriskfromtheseexposuresvaries,
dependingonhowoftenyoudothistype
ofwork.Toreduceyourexposuretothese
chemicals:workinawellventilatedarea,
andworkwithapprovedsafetyequipment,
suchasthosedustmasksthatarespecially
designedtofilteroutmicroscopicparticles.
• Avoid prolonged contact with dust
from power sanding, sawing, grinding,
drilling, and other construction
activities. Wear protective clothing
and wash exposed areas with soap
and water.Allowingdusttogetinto
yourmouth,eyes,orlayontheskinmay
promoteabsorptionofharmfulchemicals.
WARNING: Use of this tool can
generate and/or disperse dust, which
may cause serious and permanent
respiratory or other injury.Alwaysuse
NIOSH/OSHAapprovedrespiratory
protectionappropriateforthedustexposure.
Directparticlesawayfromfaceandbody.
• Sanding of lead-based paint is not
recommended.SeeSanding: Lead
Based Paintforadditionalinformation
beforesandingpaint.
• Cleanyourtooloutperiodically.
Extension Cords
Whenusinganextensioncord,besureto
useoneheavyenoughtocarrythecurrent
yourproductwilldraw.Anundersizedcord
willcauseadropinlinevoltageresulting
inlossofpowerandoverheating.The
followingtableshowsthecorrectsize
tousedependingoncordlengthand
nameplateampererating.Ifindoubt,use
thenextheaviergauge.Thesmallerthe
gaugenumber,theheavierthecord.
3
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
(0-7,6m)(7,6-15,2m)(15,2-30,4m)(30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m)(15,2-30,4m)(30,4-60,9m)(60,9-91,4m)
Ampere Rating
More Notmore AmericanWireGage
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 NotRecommended
SYMBOLS
Thelabelonyourtoolmayincludethe
followingsymbols.Thesymbolsandtheir
definitionsareasfollows:
V ..................volts
A ..................amperes
Hz ................hertz
W .................watts
min ..............minutes
or AC ...... alternating current
or DC ...direct current
n
o ................no load speed
................Class I Construction
(grounded)
................earthing terminal
................safety alert symbol
................Class II Construction
(double insulated)
.../min or rpm...revolutions or
reciprocation per minute
...............Read instruction manual
before use
................Use proper respiratory
protection
................ Use proper eye protection
................Use proper hearing
protection
4
FUNCTIONAL DESCRIPTION
1.On/offswitch
2.Backhandle
3.Fronthandle
4.Dustcollectioncanister
5.Sandingpad
6.Removablepadtip
7.Fingerattachment
8.Cordcaddy
1
2
3
6
7
8
5
4
Other Important Safety
Warnings and Instructions
Sanding
LEAD BASED PAINT
SandingofleadbasedpaintisNOT
RECOMMENDEDduetothedifficultyof
controllingthecontaminateddust.The
greatestdangerofleadpoisoningisto
childrenandpregnantwomen.
Sinceitisdifficulttoidentifywhetherornot
apaintcontainsleadwithoutachemical
analysis,werecommendthefollowing
precautionswhensandinganypaint:
PERSONAL SAFETY
•Nochildrenorpregnantwomenshouldenter
theworkareawherethepaintsandingis
beingdoneuntilallcleanupiscompleted.
•Adustmaskorrespiratorshouldbeworn
byallpersonsenteringtheworkarea.The
filtershouldbereplaceddailyorwhenever
thewearerhasdifficultybreathing.
•NOTE: Onlythosedustmaskssuitablefor
workingwithleadpaintdustandfumesshould
beused.Ordinarypaintingmasksdonotoffer
thisprotection.Seeyourlocalhardwaredealer
fortheproper(NIOSHapproved)mask.
•NOEATING,DRINKINGorSMOKING
shouldbedoneintheworkareatoprevent
ingestingcontaminatedpaintparticles.
Workersshouldwashandcleanup
BEFOREeating,drinkingorsmoking.
Articlesoffood,drink,orsmokingshould
notbeleftintheworkareawheredust
wouldsettleonthem.
ENVIRONMENTAL SAFETY
•Paintshouldberemovedinsuchamanner
astominimizetheamountofdustgenerated.
•Areaswherepaintremovalisoccurring
shouldbesealedwithplasticsheetingof4
milsthickness.
•Sandingshouldbedoneinamannertoreduce
trackingofpaintdustoutsidetheworkarea.
CLEANING AND DISPOSAL
•Allsurfacesintheworkareashouldbe
vacuumedandthoroughlycleaneddailyfor
thedurationofthesandingproject.Vacuum
filterbagsshouldbechangedfrequently.
•Plasticdropclothsshouldbegatheredup
anddisposedofalongwithanydustchips
orotherremovaldebris.Theyshouldbe
placedinsealedrefusereceptaclesand
disposedofthroughregulartrashpick-up
procedures.Duringcleanup,childrenand
pregnantwomenshouldbekeptaway
fromtheimmediateworkarea.
•Alltoys,washablefurnitureandutensils
usedbychildrenshouldbewashed
thoroughlybeforebeingusedagain.
MOTOR
Besureyourpowersupplyagreeswith
nameplatemarking.120VoltsAConlymeans
yourtoolwilloperateonstandard60Hz
householdpower.DonotoperateACtools
onDC.Aratingof120voltsAC/DCmeans
thatyoutoolwilloperateonstandard60Hz
ACorDCpower.Thisinformationisprinted
onthenameplate.Lowervoltagewillcause
lossofpowerandcanresultinover-heating.
AllBLACK+DECKERtoolsarefactory-tested;
ifthistooldoesnotoperate,checkthepower
supply.
5
OPERATING INSTRUCTIONS
WARNING:Toreducetheriskof
seriouspersonalinjury,readandfollowall
importantsafetywarningsandinstructions
priortousingthistool.
SWITCH
ToturnthetoolON,holditasshownin
Figure A or A1andpushtheon/offswitch
(1)towardthefrontofthetool.Toturnthe
toolOFF,pulltheon/offswitchbacktoward
thecord.
OPERATION
GraspproductasshowninFigure A or
A1andturniton.NOTE:Donotrest
fingersonplatenduringuse.Moveitin
longsweepingstrokesacrossthesurface,
lettingitdothework.Lightpressureisall
thatisrequiredforsanding,polishingor
scrubbing.Excessivepressurewillslow
thetoolandproduceinferiorresults.Check
yourworkoften,productiscapableof
removingmaterialrapidly.
WARNING:Shock hazard.Underno
circumstancesshouldthisproductbeused
nearwater.
CAUTION: To reduce the risk of
injury, turnoffandunplugthetoolbefore
makinganyadjustmentsorremovingor
installingattachmentsoraccessories.
DETAIL SANDING
Yourtoolisequippedwithateardropbase
whichallowsyoutouseitonlargeflat
surfacesandtightspotsorcorners.
Thepadtipsmaywearunevenly,depending
onuse.
FITTING SANDING SHEETS
• Holdthetoolwiththesandingpad(5)
facingupward.
• Placethesandingsheetontothesanding
base,ensuringalltheholesofthepaper
lineupwiththeholesinthesandingpad
asshowninFigure B.
FINGER ATTACHMENT
Thefingerattachmentisusedforfinedetail
sanding.
• Removethescrew.
• Removethediamond-shapedpadtip(6)
fromthebase.
• Fitthefingerattachmentontothesanding
baseasshowninFigure C.
• Fitandtightenthescrew.
• Alignthepropersandingsheetwiththe
fingerattachment.
CORD CADDY
Acordcaddycomesattachedtothecordof
yoursander.Thisaccessoryallowsyouto
easilystorethetipthatisnotattachedtothe
sander.
• To insert the finger attachment into
the caddy,turntheattachmentsothe
padsidefacesthecaddyandslideitin
thedirectionofthearrowonthecaddyas
showninFigure D.
• To insert the diamond-shaped tip into
the caddy,turntheattachmentsothepad
sidefacesawayfromthecaddyandslide
thetabs(9)ofthetipintothecaddyas
showninFigure D1.
A
D
A1
B
C
D1
9
6
TROUBLESHOOTING
Problem Possible Cause Possible Solution
• Unitwillnotstart. •Cordnotpluggedin. •Plugtoolintoaworkingoutlet.
•Circuitfuseisblown. •Replacecircuitfuse.
(Iftheproductrepeatedlycauses
thecircuitfusetoblow,discontinue
useimmediatelyandhaveit
servicedataBLACK+DECKERservice
centerorauthorizedservicer.)
•Circuitbreakeristripped. •Resetcircuitbreaker.(Ifthe
productrepeatedlycausesthe
circuitbreakertotrip,discontinue
useimmediatelyandhaveit
servicedataBLACK+DECKERservice
centerorauthorizedservicer.)
•Cordorswitchisdamaged. •Havecordorswitchreplacedat

BLACK+DECKER
ServiceCenteror
AuthorizedServicer.
• Dustisnot •Sandpaperholesdonotalign. •UseMouse
®
sandpaperwiththe
beingcollected. appropriateholeconfiguration.
•Dustcanisterisfull. •Separatedustcanisterandgently
shakeortaptoempty.
Forassistancewithyourproduct,visitourwebsitewww.blackanddecker.comforthe
locationoftheservicecenternearestyouorcallthe
BLACK+DECKER
helplineat
1-800-544-6986.
DUST EXTRACTION
To Empty Dust Canister:
CAUTION:Respiratory hazard.Never
operatethistoolfor wood sandingunless
thedustcanisterisinplace.Sandingdust
exhaustmaycreateabreathinghazard.
WARNING: Fire hazard. Collected
sandingdustfromsandingsurfacecoatings
(polyurethane,linseedoil,etc.)canself-ignite
insanderdustcanisterorelsewhereand
causefire.Toreducerisk,emptycanister
frequentlyandstrictlyfollowsandermanual
andcoatingmanufacturer’sinstructions.
WARNING:Fire hazard.When
workingonmetalsurfaces,donotusethe
dustcanisteroravacuumcleanerbecause
sparksaregenerated.Wearsafetyglasses
andadustmask.Duetothedangeroffire,
donotuseyoursandertosandmagnesium
surfaces.Donotuseforwetsanding.
• Thedustcollectioncanister(4)shouldbe
emptiedafterevery10minutesofsanding.
• Whileholdingthesander,graspthedust
collectioncanisterandpullitoffofthe
sanderasshowninFigure E.
• Holdthecanisterjustinsideagarbage
cantoensuredustiscontained.
• Pushupontab(10)toseparatethetopofthe
canisterfromthebottomasshowninFigure E.
• Gentlyshakeortapthetopandbottomof
thecanistertoempty.
• Reattachthetopandbottomandfirmly
pushthecanisterbackontothesander.
HINTS FOR OPTIMUM USE
• Donotplaceyourhandsoverthe
ventilationslots.
• Donotexerttoomuchpressureonthe
tool.
• Regularlychecktheconditionofthe
sandingsheet.Replacewhennecessary.
• Alwayssandwiththegrainofthewood.
• Whensandingnewlayersofpaintbefore
applyinganotherlayer,useextrafinegrit.
• Onveryunevensurfaces,orwhen
removinglayersofpaint,startwitha
coarsegrit.Onothersurfaces,startwith
amediumgrit.Inbothcases,gradually
changetoafinegritforasmoothfinish.
• Whensandingonaverticalsurface,hold
thebackhandle(2)forbettergripand
controlasshowninFigure F.
F
E
10
7
Application / Accessory Matrix
ACCESSORY RECOMMENDED APPLICATIONS / USES
MediuM grit sandpaper paint, Varnish, rust reMoVal
Fine grit sandpaper surFace blending and Finishing
e
xtra Fine grit sandpaper sanding between coats oF paint or Varnish
detail sanding tips corners / hard to reach places
1 ot polishing / stripping wool polishing Metals / stripping Varnish or urethane
4 ot Fine polishing wool Fine polishing, satin Finish on paint / Varnish / urethane
grey FoaM pad applying and reMoVing polish
white
non-woVen pad light scrubbing
red
non-woVen pad heaVy scrubbing / rust reMoVal
ThepadsdescribedabovemaybeavailableinkitswhereMouse
®
productsaresold.For
moreinformationcall1-800-544-6986.
MAINTENANCE
Useonlymildsoapanddampclothtoclean
thetool.Neverletanyliquidgetinsidethe
tool;neverimmerseanypartofthetoolinto
aliquid.
IMPORTANT:ToassureproductSAFETY
andRELIABILITY,repairs,maintenance
andadjustmentshouldbeperformedby
authorizedservicecentersorotherqualified
serviceorganizations,alwaysusingidentical
replacementparts.
SERVICE INFORMATION
AllBLACK+DECKERServiceCentersare
staffedwithtrainedpersonneltoprovide
customerswithefficientandreliablepower
toolservice.Whetheryouneedtechnical
advice,repair,orgenuinefactoryreplacement
LIMITED TWO-YEAR
HOME USE WARRANTY
Black&Decker(U.S.)Inc.warrantsthis
productfortwoyearsagainstanydefects
inmaterialorworkmanship.Thedefective
productwillbereplacedorrepairedatno
chargeineitheroftwoways.Thefirst,which
willresultinexchangesonly,istoreturn
theproducttotheretailerfromwhomit
waspurchased(providedthatthestoreis
aparticipatingretailer).Returnsshouldbe
madewithinthetimeperiodoftheretailer’s
policyforexchanges(usually30to90days
afterthesale).Proofofpurchasemaybe
required.Pleasecheckwiththeretailerfor
theirspecificreturnpolicyregardingreturns
thatarebeyondthetimesetforexchanges.
Thesecondoptionistotakeorsendthe
product(prepaid)toaBLACK+DECKER
ownedorauthorizedServiceCenterfor
repairorreplacementatouroption.Proof
ofpurchasemayberequired.Thiswarranty
doesnotapplytoaccessories.Thiswarranty
givesyouspecificlegalrightsandyoumay
haveotherrightswhichvaryfromstateto
stateorprovincetoprovince.Shouldyou
haveanyquestions,contactthemanager
ofyournearestBLACK+DECKERService
parts,contacttheBLACK+DECKERlocation
nearestyou.Tofindyourlocalservice
location,call:
1-800-544-6986 orvisit
www.blackanddecker.com
ACCESSORIES
AvarietyofMouse
®
accessoriesare
availableatextracost.Listingsperretailer
mayvary.Note:Useonlysandpaperwith
holesinthesameconfigurationasonthe
baseofthesander.Sandpaperwithoutholes
willnotallowdusttoenterthecanister.
Thehookandlooppadandindividualbases
arereplaceableparts.Iftheybecomeworn,
contactyourlocalservicecenter.Formore
informationcall:1-800-544-6986.
WARNING:
Theuseofanyaccessory
notrecommendedforusewiththistoolcould
behazardous.
Center.Thisproductisnotintendedfor
commercialuse.
FREE WARNING LABEL REPLACEMENT:
Ifyourwarninglabelsbecomeillegibleor
aremissing,call1-800-544-6986 forafree
replacement.
LATIN AMERICA:
Thiswarrantydoesnot
applytoproductssoldinLatinAmerica.
ForproductssoldinLatinAmerica,check
countryspecificwarrantyinformation
containedinthepackaging,callthelocal
companyorseethewebsiteforwarranty
information.
Black&Decker(U.S.)Inc.,
701E.JoppaRd.
Towson,MD21286U.S.A.
28
CatNo.BDEMS600 FormNo.90609851 April2014
Copyright©2014
BLACK+DECKER
PrintedinChina
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Black & Decker Black + Decker BDEMS600 Mouse 1.2A Corded Single Speed Owner's manual

Category
Power tools
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI