1. Wash face with oil free cleanser and pat dry
2. Apply water based conductive gel or water based serum to the
area of face for treatment.
3. Switch on LIFT with the power button and select your level of
microcurrent intensity indicated by number of blue lights.
4. Every 5 seconds a beep will sound to indicate to move to the
next pass. It’s recommended to do 3 passes to one area.
5. Use a combination of glide passes with lift and hold techniques.
6. Spritz water on face to prevent skin from drying out and to
maintain high conductivity levels of microcurrent energy.
7. Repeat to all areas working from the neck to the forehead.
8. Clean LIFT with a dry micro-fibre cloth.
LIFT Steps
