Idea BASSO10 Operating instructions

Brand
Idea
Model
BASSO10
Category
Loudspeakers
Type
Operating instructions

Idea BASSO10 is a compact, high-SPL subwoofer designed for professional sound reinforcement in small spaces. With its 10" European high-efficiency transducer and 400W RMS power handling, it delivers deep, impactful bass. The durable birch plywood construction and Aquaforce paint ensure longevity in various environments. Ideal for pubs, lounges, bars, clubs, and A/V setups, it offers versatile mounting options with integrated handles and M8 inserts.

Idea BASSO10 is a compact, high-SPL subwoofer designed for professional sound reinforcement in small spaces. With its 10" European high-efficiency transducer and 400W RMS power handling, it delivers deep, impactful bass. The durable birch plywood construction and Aquaforce paint ensure longevity in various environments. Ideal for pubs, lounges, bars, clubs, and A/V setups, it offers versatile mounting options with integrated handles and M8 inserts.

1
TD_BASSO10_EN_v3.3
BASSO Series models allow users to choose the most adequate
subwoofer setup for any given situation from within a family of products
with common nish, design solutions and performance philosophy, as
well as shared rigging and transport accessories.
BASSO10 is a very compact 10˝ subwoofer that delivers serious SPL levels
for installations that require professional sound reinforcement in spaces
where integration and size are key requirements.
The 10˝ low-frequency transducer allows this compact, powerful box
to deliver high-quality audio signal with maximum electro-acoustical
eciency, power-density and outstanding maximum SPL levels.
Built with the same durable, rugged construction as all BASSO family
members, BASSO10 cabinet is made with 15 mm birch plywood and
nished with exclusive IDEA Aquaforce textured painting. The 1.5 mm
weatherized steel grilled with Aquaforce coating and an internal foam
panel protect the loudspeaker from any weather or ambient conditions.
BASSO10 features two integrated handles to easily handle this lightweight
15 kg subwoofer.
This compact form-factor cabinet measures only 395 x 300 x 400
mm allowing for unobtrusive, discreet integration into any location
while providing excellent SPL for low frequency reinforcement for professional
installations.
BASSO10
FEATURES
APPLICATIONS
OVERVIEW
• Compact form-factor
• Premium European high-eciency custom IDEA 10” Transducer
• 8 Ohm Passive
• Dual Neutrik NL-4 connectors
• Rugged 15 mm birch plywood construction and nish
• Durable Aquaforce paint, available in standard textured black or white
• Optional RAL colors on demand
• Main or distributed subwoofer system in Pubs, Lounges, Bars and small clubs
• High SPL A/V sets sound reinforcement
10˝ Compact Bass-Reex Install Subwoofer
2
TD_BASSO10_EN_v3.3
300 mm
400 mm
395 mm
BASSO10
INPUT
INPUT
LINK
LINK
PRODUCT OF EUROPE
PRODUCT OF EUROPE
Made in Spain
Made in Spain
Designed, engineered
Designed, engineered
and manufactured by
and manufactured by
IDEA in Cedeira (Galicia)
IDEA in Cedeira (Galicia)
8 Ω
15 kg / 33 lbs
400W RMS
The installation of this product
The installation of this product
should be implemented by
should be implemented by
qualified professionals
qualified professionals
following safe practices and
following safe practices and
local regulations.
local regulations.
Refer to the owner's manuals
Refer to the owner's manuals
for rigging instructions, system
for rigging instructions, system
components and suspension
components and suspension
hardware intended for this
hardware intended for this
product.
product.
NL
NL
-
-
4 PINOUT
4 PINOUT
Subwoofer Signal
Parallel Signal
FREQUENCY RESPONSE
IMPEDANCE
ACOUSTICAL MEASUREMENTS
TECHNICAL DRAWINGS
This graph shows the frequency
response for a 1-watt swept sine signal
in an semi-anechoic environement (2π),
measured at 3 m and scaled down at 1
m.
In order to provide more precise
information for acoustical analysis, a 1/6
octave smoothing has been applied.
Factory presets (-10 dB)
140
200
240
Hz
Hz
Hz
LPF@
LPF@
LPF@
1kHz
dB SPL
20 Hz
100
90
110
120
130
140
50 100 200 500
5
1
2
20Hz 50 100 200 500 1kHz
10
20
100
200
50
Ohm
IDEA is always in pursuit of better performance, greater reliability and design features.
Technical specications and minor nish details may vary without notice in order to improve our products.
©2022 - I MAS D Electroacústica SL
Pol. A Trabe 19-20 15350 Cedeira (Galicia – Spain)
TECHNICAL DATA
Enclousure Design Bass-Reex
Transducers 10''
Power Handling (RMS) 400 W
Nominal Impedance 8 Ohm
SPL (Continuous/Peak) 122/128 dB SPL
Frequency Range (-10 dB) 47 - 140/200/240 Hz
Frequency Range (-3 dB) 57 - 115/155/200 Hz
Dimensions (WxHxD) 395 x 300 x 400 mm (15.6 x 11.8 x 15.7 in)
Weight 14.8 kg (32.6 lb)
Connectors
+/-1
+/-2
2 x Neutrik speakOn NL-4 in parallel
Input
Link
Cabinet Construction 15 mm birch plywood
Grille 1.5 mm weatherised steel with protective foam
Finish Durable, high-resistance IDEA-proprietary
Aquaforce paint coating process
Handles 2 integrated handles
Installation 4 x M8 inserts
Accessories U-Bracket vertical (UB-B10-V)
  • Page 1 1
  • Page 2 2

Idea BASSO10 Operating instructions

Brand
Idea
Model
BASSO10
Category
Loudspeakers
Type
Operating instructions

Idea BASSO10 is a compact, high-SPL subwoofer designed for professional sound reinforcement in small spaces. With its 10" European high-efficiency transducer and 400W RMS power handling, it delivers deep, impactful bass. The durable birch plywood construction and Aquaforce paint ensure longevity in various environments. Ideal for pubs, lounges, bars, clubs, and A/V setups, it offers versatile mounting options with integrated handles and M8 inserts.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents