Nooie Smart Life App Operating instructions

Brand: Nooie

Model: Smart Life App

Type: Operating instructions

Nooie Smart Life App empowers you to control your smart plug from anywhere, using your smartphone or tablet. You can effortlessly turn your devices on or off, set schedules, monitor energy consumption, and even create scenes to automate your home. Experience the convenience of a smart home with Nooie, turning your everyday life into an effortless, connected experience.

How to connect the Nooie smart plug

by Smart Life App

Preparation

1. Download “Smart Life” APP from APP Store or Google Play on your smartphone or

tablet.

2. Make sure your router is on a 2.4Ghz network.

3. Connect your phone or tablet to 2.4Ghz WIFI, and open Bluetooth.

(Nooie smart plug support Bluetooth assisted connection, which will make it easier

for you to connect.)

4. Plug your smart plug into a power socket and ensure it's turned on.

Connection

1. Open Smart Life, login or register your account.

2. Press and hold the button on the side of the smart until the light on the button flashes.

a. A connection screen will automatically pop up.

b. Entry your WIFI information

c. Then you can enjoy your smart plug and set it up as you are used to.

If not working, Please follow the next step

1. Tap the "+" icon to add a new device

2. Under 'Add Manually', select Electrical > Plug (BLE+Wi-Fi)

3. It ask if the smart plug light is 'Blink Slowly' or 'Blink Quickly'

4. Select the "blink quickly" option (Make sure the plug is blink quickly)

5. You will now be prompted to connect to the smart plug's own wireless network and enry

your WIFI information

6. Then enjoy using your smart plug!

If still not working, Please use AP mode

1. Press and hold the button on the side of the smart plug until the light on the button

flashes slowly. If it flashes quickly, press and hold the button again until it flashes slowly.

2. Go into the network/wireless settings on your phone and connect to the smart plug's

wireless network named something like 'SmartLife_xxxx'. You may need to wait 5-10

seconds for your phone to display a warning about this wireless not being able to provide

internet access. If it does, select 'Yes' to continue using this network

3. Go back to the 'Smart Life' app

4. The 'Smart Life' app should now continue to connect to your smart plug with progress

displayed

5. Smart plug should now be successfully connected and your phone should reconnect to

your home wireless network

6. Name your device and start using the app to control your smart plug remotely.

Nooie support team

If you still cannot access the Nooie plug after the above advice, please contact Nooie

support term with the following information:

1. Screenshot of the error message.

2. The model and operating system of your mobile device

3. The model number of your router and details of the 2.4g wireless settings, such as

encryption method, channel width and wireless mode

4. Your order ID

Q: Will this device automatically select the 2.4ghz on a dual band 2.4/5ghz network ?

A: If your router broadcasts 2 separate networks, you have to select the 2.4ghz one

specifically (i.e. if your network is HomeInternet_2.4G and HomeInternet_5G then you

select the 2.4G one). But if your router broadcasts the same SSID for both 2.4 and 5ghz

networks, it'll hook onto the 2.4ghz one automatically."

Nooie Smart Life App Operating instructions

Nooie Smart Life App Operating instructions

Nooie Smart Life App Operating instructions

Other documents