QUICK START GUIDE
R
• WiFi Smart Plug
•
ModelAKZ-M4
Wsky
A Big Thanks for You!
Thank you for purchasing our Wsky WiFi smart plug. Wsky is a brand
that focuses on providing outstanding and high quality products. Every
purchase comes with a friendly customer service provided by Wsky, a
U.S.-based company.
Customer Service:
100% SATISFACTION GUARANTEE: Wsky is dedicated to address
any product & service issues and committed to delivering 5 stars
experience for every buyer!
Any questions about the products, please feel free to contact us, we
will surely help you fix it.
E-mail:[email protected]
Contents
General Safety Information
Function Diagram
Product Features
Product Setup
- Download APP
- Registration
- Configure your APP
Configure when the indicator is flashing fast
Configure when the indicator is flashing Slow
Functions
- Timer and Schedule
“Countdown”Function
“Schedule”Function
- Repeater Mode
Connect to Alexa
Connect to Google Home
Frequently Asked Questions
General Safety Information
Attention: Please read this manual thoroughly before using the
device and comply with all of the instructions provided in this
manual. Failure to comply with the instructions given in this manual
and/or using the device in ways other than the ones mentioned in
this manual may result in serious injury and/or damage to the
product.
•The smart plug shall be stored it in a dry and cool area, avoid
direct sun exposure.
•keep out of reach of children
•Indoor use only
•DO NOT expose to water, dust or any other chemicals
•DO NOT exceed the maximum power rating 10A or 1100W.
•DO NOT use for or near air conditioner or heaters.
•We DO NOT recommend install the plug in the restroom and any
other wet environments.
•DO NOT use the plug during the extreme weather like lightning
storm.
•When cleaning, unplug the smart plug first and use a dry cloth to
wipe the plug's surface.
•Our smart plug currently only work on 2.4gHz network, not 5gHz.
•Our "eHome" APP is only compatible with Android 4.4 and
later/IOS 8.0 and later.
Function Diagram
1. Power buttonHold Pairing Mode
Led indicator
Front
Back
2
1
2
1
Product Features
Product Name: Wsky Smart WiFi Plug
Size: 50*50*57mm (each)
Weight: 71g (each)
Product Material: ABS+PC flame retardant material 94V0,
PCBA card.
Rated Current: 10 A (Max)
Voltage: AC 90~250V
Working Temp: -20 C - 45 C
Wireless Type: Wi-Fi 2.4GHz
Wireless Standard: IEEE 802.11 b/g/n
Support System: Android 4.4 or later/IOS 8.0 or later
Product Setup
Download APP
Download "SmarteHome" From App Store or Google Play or Scan
QR code.
Connect phone or tablet to your 2.4GHz WiFi network. (Note: Our
Smart Plug only supports 2.4GHz networks)
If you are using Dual Band Router, please make sure you setting
different passwords for each 2.4GHz and 5GHz. Otherwise, you
network will automatically connect to 5GHz and you are not able to
connect our smart plug.
Get it on
Google Play
Download on the
APP store
QR code
2.4G
2.4G
2.4G 2.4G
Registration
Sign in an account (Note: Currently the passwords are only support
numbers and small letter, Not special characters.)
Configure your APP
1. Configure when the indicator is flashlight fast
① Go to “My Devices” ----- Click “+” ----- “Add device”
② Hold power button for 5s on the smart plug until the indicator is
flashing the blue light ----- Click “confirm the indicator is flashing
fast” ----- Input your WiFi passwords and Click “Confirm”
③ Rename your device and then it will start connecting like this
below.
2. Configure when the indicator is flashlight slow
① When the Smart Plug is connected, go to “My Devices” ----- Click
“+” ----- “WLAN Discovery”
② First, hold power button for 5s until the indicator is flashing the
blue light fast and then hold power button for 5s on the smart plug
until the indicator is flashing the blue light slowly, and choose the
“Compatibility Mode” at the top right corner. (OR you can go to “My
Devices”------Click “+”------“add device”------“Compatibility Mode”
)
Note: Please check the wifi name is still in 2.4GHz.
③ Click “Confirm the indicator is flashing slow”, after complete the
connecting, go back to the Phone setting ------ WLAN ------ Choose
“SmartTouch_xxxx” and input the passwords “12345678”------Com-
plete the setup.
④ Go back to “eHome” App and wait until the setup is complete.
When you connection is finished, your WLAN will automatically
connect to the your home wifi.
⑤ Rename your device and then it will start connecting like this
below.
Functions
Timer and Schedule
“Countdown”Function
① Open the "eHome" APP, and select the Smart Plug you wish to
set a countdown timer.
② Select Countdown from the Options at the bottom.
③ You could set time period to switch ON/OFF to your device.
“Schedule”Function：
① Select Schedule from the main screen.
② Create a new rule by selecting "Add Timer"
③ Select the time you wish to switch your Plug ON/OFF
Repeater Mode
① Make sure the Smart Plug is connect and the Device is “ON”.
② Click 3 dots at the top right corner, and switch “On/Off” of the
“wireless setting” .(Your Personal Hotspot)
a
b
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Google Home App to Control Smart Devices User guide
-
Emerson EATE14RSD2T User manual
-
Emerson Quiet Kool EAD40SEP1T User manual
-
-
-
-
-
EQK EATC14RSD2T User manual
-
-
