PROBEAM PB-FOG-LENS-Y Operating instructions

Hello! I've reviewed the ProBEAM PB-FOG-LENS-Y LED Halo Fog Lamp Amber Lens Installation Instructions. This document provides guidance on how to install the amber lenses to ProBEAM LED fog lamps. It includes steps on lens removal, gasket placement, and reassembly of the lens/bezel. I am ready to answer questions about this installation process.
What is included in the package?

What is the first step when installing new amber lens?

What should be done to prevent fingerprints on the new Amber Lens?

Installation:

1. Remove lens bezel from the fog lamp by turning the bezel counterclockwise.

2. Remove the clear lens with gaskets from the lens bezel.

3. Wearing gloves, to prevent fingerprints on the new Amber Lens, remove the clear protective film from the

new Amber Lens.

4. Place the existing lens gasket on the new Amber Lens.

5. Set the new Amber Lens, with the gasket, into the lens bezel as shown in Photo1.

6. Reinstall the lens bezel onto the fog lamp housing.

Custom Dynamics® ProBEAM® LED Halo Fog Lamp

Amber Lens Installation Instructions

We thank you for purchasing the Custom Dynamics® ProBEAM® LED Halo Fog Lamp Amber Lens. Our products utilize the

latest technology and high quality components to ensure you the most reliable service. We offer one of the best warranty

programs in the industry and we back our products with excellent customer support, if you have questions before or during

installation of this product please call Custom Dynamics® at 1(800) 382-1388.

Questions? Call us at: 1 (800) 382-1388 M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST 06/2022

Package Contents:

- ProBEAM® LED Halo Fog Lamp Amber Lens (2)

- Instructions

Part Number: PB-FOG-LENS-Y

Fits: ProBEAM® LED Halo Fog Lamps (sold separately).