11/06/2007 5:13:50 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
A series of understated, balanced lampholders that come in a variety of
lamp types. The Stasis family of lampholders feature die cast and extruded
bodies with elegant free flowing lines. Ideal for accent and display lighting
applications. This Ceramic Metal Halide T6 lampholder is perfect for those
applications where performance is required from a discreet source.
Die cast adapter attaches
electrically and mechanically
anywhere along track. Includes
discreet locking tab that locks
lampholder on track and allows for
easy removal and repositioning.
Two position conductor allows use
in single circuit and either circuit of
Lampholder tilt and rotation can be
locked in place easily with the
included 1.5mm allen wrench.
On-off switch allows power to be
replacement on individual
Die cast and extruded aluminum
housing incorporates the lamp
Aluminum die cast lamp housing
has an integral reflector and
adjustable light center optic
allowing the light beam to be
adjusted from spot-to-flood.
Arm allows the lamp housing tilt to
adjust +/-90°. It also pivots +/-90°
around the ballast housing. This
enables the ballast housing to
remain static on the track creating
a clean look, while providing full
aiming capabilities. The arm
employs graduations every 15° for
precise and repeatable tilt aiming.
Indicator mark on the bottom
ensures perfect lamp housing
Knob rotates 90° providing infinite
spot-to-flood. A cool-to-the-touch
silicone cover allows convenient,
hot aiming capabilities. The
silicone cover has an embossed
graphic indicating turn direction
Removable front bezel features
positive threaded engagement and
holds the containment lens with a
threaded media ring. The bezel
accepts L275 cube cell louver and
L200 media, including color filters
and beam modifying lenses. Bezel
accepts a total two pieces of
UL/c-UL Listed for use with Halo
Power-Trac and Lazer Track.
39 and 70W Ceramic Metal Halide
T6
39W
5-5/8"
[143mm]
70W
6-3/4”
[171mm]
2-3/8"
[60mm]
4-13/16"
[106mm]
7-7/16"
[189mm]
A
D
G
E
H
B
F
C
B
Track
L=Halo Track
Lamp Type
5=Metal
Halide
Series
05=Stasis
Lamp
6 =T6 CMH
5L 05 6
Finish
P=White
MB=Black
Accessories
L200=Series Lenses
L275 =Cube Cell Louver
Wattage
39 = 39W T6 CMH
70 = 70W T6 CMH
(Lamp Not
Included)
AH =Aluminum
Haze
Energy Data
Input Power: 39W: 45W
70W: 77W
Power Factor:
>
0.95
Input Current: 39W: 0.37A
70W: 0.65A
Harmonic Distortion: <10%