Intermatic PE35300 is a versatile control panel system that can be used for various applications, including distribution panels, motor control, and pump control. It features an 80A 8-position breaker base, a 3-SPST mechanism for controlling pumps and lighting, and a dead front with knockouts for switches or GFCIs. The PE35300 also allows for the installation of wiring devices using standoffs. It is suitable for both indoor and outdoor use, with a rainproof Type 3R enclosure. Additionally, the control panel includes a transformer option for providing low voltage to LED lights.
Intermatic PE35300 is a versatile control panel system that can be used for various applications, including distribution panels, motor control, and pump control. It features an 80A 8-position breaker base, a 3-SPST mechanism for controlling pumps and lighting, and a dead front with knockouts for switches or GFCIs. The PE35300 also allows for the installation of wiring devices using standoffs. It is suitable for both indoor and outdoor use, with a rainproof Type 3R enclosure. Additionally, the control panel includes a transformer option for providing low voltage to LED lights.
Item Bundle - PE35300
Item Bundle - 80 A Load Center with P1353ME Mechanism
Item PE35300
PRODUCT DESCRIPTION
This system can be used as a load center only, or add mechanisms or wiring devices for complete control systems.
FEATURES
80 A 8-position breaker base
3-SPST mechanism (P1353ME) controls single and two-speed filter pumps, cleaner/booster pumps, and
pool/spa landscape lighting
Load center dead front has four knockouts for switches or GFCIs
Transformer option provides low voltage for LED lights
Wiring devices may be installed in these load centers with the use of Standoffs, sold separately
APPLICATIONS
Distribution/Control Panel
Motor Control
Pump Control
TECHNICAL DATA
General
Model Number PE35300
Description 80 A Load Center with P1353ME Mechanism
UPC Code 078275105331
Brand Intermatic
Country of Origin (Intermatic) CANADA
Warranty Period 1-Year limited
Mechanical Specifications
Number of Breaker Knockouts 8
Enclosure Type Outdoor type 3R plastic
Dimensions
Product Dimensions (H x W x D) in 22.875 x 14.875 x 4.75 in
Knockout Dimensions Bottom (1) 1 1/8" diameter hole, (6) 1/2" - 3/4", (3) 3/4" - 1"
Knockout Dimensions Back (1) 3/4" - 1"
Knockout Dimensions Left (2) 1/2" - 3/4"
Knockout Dimensions Right (1) 1 3/4" x 2 3/4"
Load Ratings
Tungsten Range(s) 5 A, 120/240 VAC, 50/60 Hz
Motor
80 LRA @ 120 VAC, 50 Hz;80 LRA @ 240 VAC, 50 Hz;17 FLA @ 120 VAC, 50 Hz;17 FLA @ 240
VAC, 50 Hz;80 LRA @ 120 VAC, 60 Hz;80 LRA @ 240 VAC, 60 Hz;17 FLA @ 120 VAC, 60 Hz;17
FLA @ 240 VAC, 60 Hz
Load Center Ratings 80 A;80 A, 208 VAC, Single Phase
Auxiliary Switch 2 A, 24 VAC
Resistive Load Ratings Ranges 17 A, 120/240 VAC, 50/60 Hz
Motor Load Ratings Ranges 80 LRA, 17 FLA @ 120/240 VAC, 50/60 Hz
1/
3
Technical specifications and other information are subject to change without notice. Images can vary from original. © 10/19/2022
http://waterheatertimer.org/Digital-control-centers-and-manuals.html#PE35300
Item Bundle - PE35300
Electrical Specifications
Number of Circuits 3
Switch Type 3-SPST
Number of Receptacle/Switch Knockouts 4
Packaging
Shipping Weight (lbs) 24.21
Unit Carton Dimensions (H x W x L) in 5.509 x 16.009 x 23.509 in
Standards and Certifications
CSA Certification cCSAus
California Proposition 65 DEHP
2/
3
Technical specifications and other information are subject to change without notice. Images can vary from original. © 10/19/2022
ACCESSORIES
21T156A
Spacer-Standoff, 3" long - 4 pack
21T166A
Spacer-Standoff, 3" long - 2 pack
PE30000 PE35300
LR3730
CLASS CTL DISTRIBUTION /CONTROL PANEL
RAINPROOF TYPE 3R ENCLOSURE FOR INDOOR/OUTDOOR USE.
SUITABLE FOR SWIMMING POOL/SPA APPLICATIONS AND FOR DIRECT CONNECTION TO A WET-NICHE OR NO-NICHE LUMINAIRE.
ALL DEVICES IN THIS CONTROL MUST BE SUPPLIED BY BRANCH CIRCUIT PROTECTORS LOCATED WITHIN THIS ENCLOSURE.
MODEL: PE35300
80 A
120/240 V or 120/208 V single phase (three wire) AC, 60 Hz
The short circuit rating of this panel is 10000 RMS symmetrical amperes.
WARNING Risk of Fire or Electric Shock
• Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing.
• Installation and/or wiring must be in accordance with National Electrical Code (Article 680)/Canadian Electrical Code (Section 68) and local electrical code requirements and is
subject to approval by the local inspection authority.
• Use #14 - #6 AWG COPPER conductors ONLY, rated 75° C min., for branch circuit and #14 - #2 AWG for main lugs and neutral main.
• For outdoor locations or wet locations (rain-tight), conduit hubs that comply with requirements of the UL514B (standard for fittings for conduit and outlet boxes) are to be used.
• Install only LISTED receptacle(s) and/or wiring device(s) inside the enclosure.
• The control panel is to be a minimum of 3m (in Canada) or 5ft (in USA) from the inside wall of the pool, spa, or pond, unless separated from the body of water by a fence, wall or
other permanent barrier that will make the unit inaccessible to persons in the water.
• If this enclosure is used for direct conduit connection to a wet-niche or no-niche luminaire, one of the connection kits listed below in NOTE 6 must be used.
• When panel is outdoors, a LISTED rainproof cover must be installed over the wiring device in the side knockout.
• This control should not be connected to any equipment which would cause bodily injury or property damage should it be activated unexpectedly.
• Follow circuit breaker manufacturer’s installation instructions.
• Do not connect two or more power supplies in parallel.
• Replace front panel covering terminals before powering ON.
• KEEP DOOR CLOSED AT ALL TIMES when not servicing.
SUITABLE LISTED BREAKERS
CIRCUIT BREAKER FILLER
MANUFACTURER SINGLE DOUBLE TWIN QUAD GFCB PLATE
CUTLER-HAMMER BR BR BRD BRD GFCB BRFP
MURRAY MP-T MP-T MH-T MH-T MP-GT LX100FP
SIEMENS QP QP QT QT QPF QF3
SQUARE D HOM HOM HOMT HOMT HOM HOMFP
GE (up to 40 A) THQL THQL -- -- THQL-GF, GF1 THFILLER
aTORQUE CIRCUIT BREAKER LUGS TO VALUES SPECIFIED ON CIRCUIT BREAKERS
b45 A FOR CANADA
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081-9698
154--02353
PE35300
UL508
UL1563
NEC680
AVERTISSEMENT Risque d’incendie ou d’électrocution
• L’installation et le câblage doivent être réalisés conformément au Code national de l’électricité (article 680)/Code canadien de l’électricité (section 68) et aux exigences des normes électriques régionales et sont soumis à
l’approbation de l’organisme de contrôle local.
• Utiliser UNIQUEMENT des conducteurs en CUIVRE de 14 à 6 AWG, évalués à 75 °C min, pour le circuit de dérivation et de 14 à 2 AWG pour les cosses principales et le fil neutre.
• Pour les emplacements extérieurs ou les endroits humides (étanches à la pluie), utiliser des entrées de conduits conformes aux exigences de la norme UL514B pour les pièces de fixation pour conduits et boîtes de sortie.
• Le panneau de commande doit se trouver à au moins 3 m (au Canada) ou 5 pi (aux États-Unis) de la paroi interne de la piscine, du spa ou de l’étang, à moins qu’il ne soit séparé du plan d’eau par une clôture, un mur ou
toute autre barrière permanente rendant l’unité inaccessible aux personnes se trouvant dans l’eau.
• Si ce boîtier est utilisé pour le raccordement direct d’un conduit à un luminaire avec niche immergée ou sans niche, l’une des trousses de raccordement indiquées ci-dessous à la REMARQUE 6 doit être utilisée.
NOTES:
1. Any Intermatic T100M or ET100CM Series Time Switch, PF1000M Series Freeze Protection or
RC2000M Series Air Switch mechanisms, P1353ME mechanism, P4243ME mechanism, or P4043ME
mechanism may be installed in the bracket(s) provided or in the event an existing mechanism(s)
is replaced. The P5043ME can also be used in this panel in conjunction with a MultiWave Control
System. If a filler plate is needed, contact factory.
2. An additional ground bar may be installed in this control panel (order 130T1318A).
3. If this control panel requires bonding, attach a LISTED bonding terminal of a suitable size using the
mounting hole(s) provided on the bottom of the enclosure.
4. When a circuit breaker is back-fed, 22T904A breaker hold-down kit must be used.
5. A wiring device may be installed in this control panel (order 21T156A (4) standoffs for mounting).
6. The following kits are available to connect underwater luminaires to this enclosure:
1/2” non-metallic - order 156PA13713A
3/4” non-metallic - order 156PA13714A
1” non-metallic - order 156PA13715A
1/2” metallic - order 156PA14336A
6. Voici les trousses disponibles pour raccorder des luminaires sous-marins à ce boîtier :
Non métallique de 12,7 mm (1/2 po) - Réf. 156PA13713A
Non métallique de 19 mm (3/4 po) - Réf. 156PA13714A
Non métallique de 2,54 mm (1 po) - Réf. 156PA13715A
Métallique de 12,7 mm (1/2 po) - Réf. 156PA14336A
7. This KO is for installing an optional PE653RC MultiWave wireless receiver and remote control system,
which can be used with the P5043ME in NOTE 1 above.
CONTACT RATINGS - EACH CIRCUIT, (P1353ME)
17 A Resistive, 120/240 VAC, 60 Hz
17 FLA, 80 LRA, 120/240 VAC, 60 Hz
5 A Tungsten, 120/240 VAC, 60 Hz
Aux. Switch, 2 A, 24 VDC
EVENTS PER CIRCUIT: 3 ON/OFF Events Per Circuit
MEMORY RETENTION:
40-year retention for all programmed settings.
8-hour time retention.
WIRING INFORMATION - COPPER CONDUCTORS ONLY
TERMINAL TORQUEa MAX MOTOR GENERAL PURPOSE
SUPPLY LINE AND LOAD BRANCH CIRCUIT
WIRE SIZE CIRCUIT NEUTRAL NEUTRAL (CONTINUOUS MAX
75˚C MIN BREAKER MAIN AND DUTY) BREAKER CURRENT
INSULATION RATING LUGS GROUND 120 V 240 V RATING CAPACITY
AWG AMP LB-IN LB-IN HP HP AMP AMP
14 15 35 20 1/2 1 15 12
12 20 35 20 1 2 20 16
10 30 35 20 1 1/2 3 30 24
8 50b 40 25 2 5 40 32
6 65 45 35 --- --- 60 44
4 80 45 35 --- --- --- ---
SEE NOTE 7
P1353ME OPERATING INSTRUCTIONS
1. Press PROG Key to cycle through menu options.
2. Press UP and DOWN arrow keys to change program settings.
3. Press ENTER key to save changes and exit programming mode.
4. Press ON/OFF keys to manually turn devices ON or OFF.
VALVE ACTUATOR SUPPLY: 24 V - 40 VA MAX.
3-CIRCUIT DIGITAL CONTROL RATINGS:
CLOCK SOURCE VOLTAGE: 120/240 VAC, 60 Hz
POWER CONSUMPTION: 6.0 W Max
CONTACT CONFIGURATION: SPST - each circuit
-
1
-
2
-
3
Intermatic PE35300 is a versatile control panel system that can be used for various applications, including distribution panels, motor control, and pump control. It features an 80A 8-position breaker base, a 3-SPST mechanism for controlling pumps and lighting, and a dead front with knockouts for switches or GFCIs. The PE35300 also allows for the installation of wiring devices using standoffs. It is suitable for both indoor and outdoor use, with a rainproof Type 3R enclosure. Additionally, the control panel includes a transformer option for providing low voltage to LED lights.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Intermatic DT101D89 Owner's manual
-
Intermatic PE45300 Supplementary Manual
-
Intermatic PE30000T3 Owner's manual
-
-
Intermatic PE40000 Series Installation, Operation & Service Manual
-
-
-
Intermatic PE30000 Series Installation, Operation & Service Manual
-
-