29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
Installation Manual
Specifications
Voltage: 12V DC Power: 2x20W
Lamp: MR16 (not included) IP Rating: 65
LED Driver required (wire in parallel)
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
SHADOW-2LT-PATH
Variant Item No. Description
49086
SHADOW-2LT-PATH
2LT light, Path spike light. Black finish
49180 2LT light, Path spike light. Black finish, GU10 3000K
49182 2LT light, Path spike light. Black finish, GU10 5000K
49087 2LT light, Path spike light. 316 Stainless Steel finish
49184 2LT light, Path spike light. 316 Stainless Steel finish, GU10 3000K
49186 2LT light, Path spike light. 316 Stainless Steel finish, GU10 5000K
Thank you for purchasing your new SHADOW-2LT Path Spike, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty.
1000mm
600mm400mm
90° Tilt
270° Swivel
110mm
60mm
May 23, 2022 1:19 pm