Canon CB-2LTE User manual

Brand: Canon

Model: CB-2LTE

Category: Battery chargers

Type: User manual

This manual is also suitable for

CB-2LT

Canon CB-2LTE is a battery charger designed to charge Canon battery packs. It features a compact design, making it easy to store and transport. The charger is compatible with various Canon cameras, including the EOS Rebel series, EOS M series, and EOS R series. It supports fast charging, allowing you to quickly power up your batteries. The Canon CB-2LTE also includes intelligent charging technology that prevents overcharging and overheating, ensuring the safety of your batteries and extending their lifespan.

Canon

JC~TlJ-~~P--‘3i‘~-

Canon Battery Charger

Canon Akkuladegertit

Cargador de Bateria Canon

Chargeur de Batterie Canon

Carica Batterie Canon

MtSiM!l3%#

CB=2LT/

CB-2LTE

CB-PLT

H 1 /Fig. l/Abb. l/H

3iszs3/9

Charge indicator

Ladeanzeige

lndicador de carga

lndicateur de charge

lndicatore di carica

fzWL;r;lxT

Fig. 2lAbb. 21 I?42

Charge indicator

Ladeanzeige

lndicador de carga

lndicateur de charge

lndicatore di carica

TEWB~!H

Ca11011

J(~TU-7t'-Yt'

Canon Battery Charger

Canon Akkuladegerat

Cargador de Bateria Canon

Chargeur de Batterie

Canon

Carica Batterie Canon

fi~

~,jt!!3t

CB-2LTI

CB-2LTE

CB-2LT

lSI

, /Fig.

Abb.

1/1111

3't1ii5Y::t

Charge indicator

Ladeanzeige

Indicador de carga

Indicateur de charge

Indicatore

carica

3t~jl!i;r.n

Fig.

21Abb.

2/1112

Charge indicator

Ladeanzeige

Indicador de carga

Indicateur de charge

Indicatore

carica

3t~jlijf-n

Instructions

English

Thank you for purchasing this charger.

Please check your product’s instruction manual to make

sure that your battery pack can be charged with this

charger.

The shape of the plug differs according to the part of the

world it is designed for.

Please also refer to the explanatory material for the

product you purchased.

Preparation

CB-PLT

Flip out the retractable plug (Fig. l-$l)

CB-2LTE

Connect the power cable to the charger (Fig. 2-g))

To charge battery packs

1. Attach the battery pack to the charger (Fig. I-@),

(Fig. 2-B).

Align the front end of the battery pack with the guides

on the charger, then press and slide the battery pack

into the charger to set it in place.

2. Plug the AC plug into a household power socket

(Fig. l-o), (Fig. 2-o).

CB-2LT

According to the type of household power socket you

have, other sockets may be blocked while the charger is in

use.

3. The charge indicator lights in red and charging starts.

4. The indicator light changes to green when the battery

pack is fully charged.

5. Unplug the charger from the household power socket

6. Remove the battery pack by sliding it out.

CB-2LT

7. Push the plug back into its retracted position.

CBQLTE

7. Disconnect the power cable from the charger

Notes:

The charger becomes warm during use. This is not a

malfunction.

If the charger is used next to a TV, it may cause the TV

to emit noise - move the charger away from the TV or

the antenna aerial cable.

Never unplug the charger during use

Be sure to unplug the charger when you have finished

using it.

The charger can be used with a power supply between

100 and 240 V AC. Contact your nearest Canon service

center for about the plug adapters for overseas use

information.

To prevent equipment breakdowns and excessive

heating, do not connect this charger to voltage

converters used by travelers, or special power sources

such as on aircraft, ships or DC to AC inverters, etc.

Do not disassemble the charger, do not get it wet, and

do not expose it to shock or vibration, or to direct

sunlight. Avoid exposure to high temperatures, such as

in a closed car in hot weather, and do not leave it near

heat-radiating equipment, such as a stove or heater.

The charger may make noise when it is operating. This is

not a malfunction.

Specifications:

Rated input:

100 - 240 V AC, 50/60Hz,

0.17A (IOOV) - O.lOA (240V)

Rated output:

8.4V DC, 0.5A

Operation temperature:

0°C - 40°C (32”F- 104°F)

Dimensions:

9lx295x56mm

(35/8x1 1/8x21/4

in)

Weight:

CB-2LT: 86g (3 oz)

CB-2LTE: 829

(v/8

oz)

(without power cable)

Weight and dimensions are approximate. Errors and

omissions excepted. Subject to change without notice.

lEI

IInstructions

English

Thank

you

for purchasing this charger.

Please check your product's instruction manual to make

sure that your battery pack can

charged with this

charger.

The shape of the plug differs according to the part of the

world

is designed for.

Please also refer to the explanatory material for the

product you purchased.

Preparation

CB-2LT

Flip out the retractable plug (Fig.

1-(1)).

CB·2LTE

Connect the power cable to the charger (Fig. 2-(1)).

To charge

ba"ery

packs

Attach the battery pack to the charger (Fig.

1-G'»),

(Fig.

2-0)

• Align the front end of the battery pack with the guides

the charger, then press and slide the battery pack

into the charger to set it in place.

Plug the AC plug into a household power socket

(Fig. 1-@), (Fig. 2-@).

CB-2LT

According to the type of household power socket you

have, other sockets may

blocked while the charger

use.

The charge indicator lights

red and charging starts.

The indicator light changes to green when the battery

pack is fully charged.

Unplug the charger trom the household power socket

Remove the battery pack by sliding it out.

CB-2LT

Push the plug back into its retracted position.

CB-2LTE

Disconnect the power cabie from the charger.

Notes:

• The charger becomes warm during use. This is not a

malfunction.

•

the charger

used next to a TV, it may cause the TV

to emit noise - move the charger away from the TV or

the antenna aerial cable.

• Never unplug the charger during use

• Be sure to unplug the charger when you have finished

using

it.

• The charger can be used with a power supply between

100 and 240 V AC. Contact your nearest Canon service

center for about the plug adapters for overseas use

intormation.

•

prevent equipment breakdowns and excessive

heating, do

not

connect this charger to voltage

converters used by travelers, or special power sources

such as

aircraft, ships or

to AC inverters, etc.

• Do not disassemble the charger, do not get it wet, and

do not expose it to shock or vibration, or to direct

sunlight. Avoid exposure to high temperatures, such as

a closed car

hot weather, and do not leave it near

heat-radiating equipment, such as a stove or heater.

• The charger may make noise when it is operating. This is

not a malfunction.

Specifications:

Rated input:

Rated output:

Operation temperature:

Dimensions:

Weight:

100 - 240 V AC, 50/60Hz,

0.17A (100V) - 0.10A (240V)

8.4V DC, 0.5A

O°C

- 40°C (32°F- 104°F)

91x29.5x56mm

/sx1

/sx2

in)

CB-2L

86g (3 oz)

CB-2LTE:

82g

oz)

(Without power cable)

Weight and dimensions are approximate. Errors and

omissions excepted. Subject to change without notice.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

In these safety instructions the word “product” refers to the Canon Battery Charger CB-2LT.

1. Read instructions - All the safety and operating instructions should be read before the product IS

operated.

2. Retarn Instructions - The safety and operating rnstructions should be retained for future

reference.

3. Heed Warnings - All warnings on the product and in the operating instructions should be

adhered to.

4. Follow Instructions - All operating and maintenance Instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. The product should be cleaned only as recommended in this manual.

6. Accessories - Do not use accessories not recommended in this manual as they may be

hazardous.

7. Avoid magnetic or electric fields - Do not use the camera close to TV transmitters, portable

communication devices or other sources of electric or magnetic radiation. They may cause prcture

interference, or permanently damage the camera.

8. Water and Moisture - Hazard of electric shock - Do not use this product near water or In

rainyimorst situations.

9. Placing or Movtng - Do not place on an unstable cart, stand, tripod, bracket or table.

The product may fall, causing serious Injury to a child or adult, and serious damage to

the product.

A product and cart combination should be moved with care. Quick stops, excessrve

l b

force, and uneven surfaces may cause the product and cart combrnation to overturn.

ALL*

10. Power Sources - The product should be operated only from the type of power source

Indicated on the marking label. If you are not sure of the type of power supply to your home,

consult your product dealer or local power company. Regarding other power sources such as

battery power, refer to instructions In this manual.

11.

Lightning - For added protection of this product during a lightning storm, or when it is left

unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect

the antenna. Thus will prevent damage to the product due to lightning and power-line surges.

12.

Overloading - Do not overload wall outlets and extension cords as this can result In a risk

of fire or electric shock.

13. Objects and Liquid Entry - Never push objects of any krnd Into thus product through

openrngs as they may touch dangerous voltage pornts or short out parts that could result in a fire

or electric shock. Be careful not to spill liquid of any kind onto the product.

14. Servrcrng - Do not attempt to service thus product yourself as openrng or removrng covers

may expose you to dangerous voltage or other hazards. Refer all servrcrng to qualified service

personnel.

15. Damage Requiring Service - Disconnect thus product from the wall outlet and all power

sources Including battery, and refer servicing to qualified service personnel under the following

conditions:

a. When the power-supply cord or plug IS damaged

b If any llqud has been spllled onto, or oblects have fallen into, the product

c If the product has been exposed to ra,n or water.

d If the product does not operate normally even If you follow the operating instructions Adjust only those controls that are covered

by the operation mstructlons. Improper adlustment of other controls may result I” damage and WIII often iequre extensive work by

a quaIlfled technician to restore the product to its normal operation

e. If the product has been dropped or the cabinet has been damaged

f When the product exhlblts a dlstlnct change rn performance This lndlcates a need for service

16. Replacement Parts - When replacement parts are required, be sure the service technicran

has used replacement parts that are specified by Canon or that have the same characteristics as

the original part Unauthorized substitutions may result In fire, electrrc shock or other hazards.

17 Safety Check - Upon completion of any servrce or reparrs to this product. ask the service

technician to perform safety checks to determine that the product IS In safe operating order.

This product is not intended to be serviced. Should the product cease to function in its intended manner, it should be returned to the manufacturer or be discarded.

Important Usage Instructions

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

these safety instructions the word "product" refers to the Canon Battery Charger CB-2LT.

Read Instructions - All the safety and operating instructions should be read before the product

operated.

Retain Instructions - The safety and operating Instructions should be retained for future

reference.

Heed Warnings - All warnings on the product and

the operating instructions should be

adhered to.

Follow Instructions - All operating and maintenance Instructions should be followed.

Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol

cleaners. The product should be cleaned only as recommended

this manual.

Accessories - Do not use accessories not recommended

this rnanual as they may be

hazardous.

Avoid magnetic or electnc fields - Do not use the camera close to TV transmitters, portable

communication deVices or other sources of electric or magnetic radiation. They may cause picture

interference, or permanently damage the camera.

Water and Moisture - Hazard of electnc shock - Do not use this product near water or

rainy/moist situations.

Placing or

MOVing

- Do not place on an unstable cart, stand, tripod, bracket or table.

(&)

The product may fall, causing serious Injury to a child or adult, and serious damage to

the product. •

A product and cart combination should be moved with care. QUick stops, excessive

1IiI~

force, and uneven surfaces may cause the product and cart combination to overturn.

10. Power Sources - The product should be operated only from the type of power source

Indicated on the marking label. If you are not sure of the type of power supply to your home,

consult your product dealer or local power company. Regarding other power sources such

battery power, refer to instructions

thiS

manual.

11. Lightning - For added protection of this product dUring a lightning storm, or when it is left

unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect

the antenna.

ThiS

will prevent damage to the product due to lightning and power-line surges.

12. Overloading - Do not overload wall outlets and extension cords as this can result

a risk

of fire or electriC shock.

13. Objects and Liquid Entry - Never push Objects of any kind Into

thiS

product through

openings as they may touch dangerous voltage pOints or short out parts that could result

a fire

or electric shock. Be careful not to spill liqUid of any kind onto the product.

14. ServIcing - Do not attempt to service thiS product yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all servIcing to qualified service

personnel.

15. Damage ReqUiring Service - Disconnect thiS product from the wall outlet and all power

sources Including battery, and refer servIcing to qualified service personnel under the

follOWing

conditions:

When the power-supply cord or plug IS

damaged

any

liqUid has been spilled onto, or objects have fallen Into, the prodUCt.

If the product has been exposed to rain or water.

If the product

does

not operate normally even if you follow the operating Instructions. Adjust only those controls that are covered

by the operation Instructions. Improper adjustment of

other

controls may result

damage

and will often require extenSive work by

a qualified techniCian to restore the product to its normal operation

the

product has been dropped or the cabinet has been

damaged

f When the product exhibits a distinct change

performance. ThiS Indicates a need for service.

16. Replacement Parts - When replacement parts are required, be sure the service technician

has used replacement parts that are specified by Canon or that have the same charactenstics as

the original part. Unauthorized substitutions may result

fire, electnc shock or other hazards.

17 Safety Check - Upon completion of any service or repairs to

thiS

product. ask the service

technician to perform safety checks to determine that the product

safe operating order.

This product

not intended to be serviced. Should the product cease to function

its intended manner, it should

returned to the manufacturer or

discarded.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class 6 digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop

operation of the equipment,

Canadian Radio Interference Regulations

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

Reglementation canadienne sur les interfkrences radio

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

(1)

this device may not cause harmful interference, and

(2)

this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

accordance