Siemens M7219 Operating instructions

M7219
Siemens
Brand
Siemens
Model
M7219
Type
Operating instructions

Siemens M7219 is a versatile device designed to help you control and monitor your home's HVAC system. With its user-friendly interface and advanced features, you can easily adjust temperatures, set schedules, and monitor energy consumption, all from the convenience of your smartphone or tablet. It also offers voice control compatibility, allowing you to manage your home's comfort with simple voice commands.

Siemens M7219 is a versatile device designed to help you control and monitor your home's HVAC system. With its user-friendly interface and advanced features, you can easily adjust temperatures, set schedules, and monitor energy consumption, all from the convenience of your smartphone or tablet. It also offers voice control compatibility, allowing you to manage your home's comfort with simple voice commands.

Siemens AG, Rastatt (DE) M7219 01.07.2019 1/4
M7219
POL903.00/100
https://www.siemens.com/bt/download/
DE Weitere Informationen siehe Datenblatt CC1N7219 unter:
For further information see data sheet CC1N7219 under:EN
ZH CC1N7219:
Siemens AG, Rastatt (DE) M7219 01.07.2019 2/4
RED Declaration
DE
Hiermit erklärt Siemens Schweiz AG, dass der Funkanlagentyp
PXC4xx, PXC5xx der Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der
folgenden Internetadresse verfügbar:
http://www.siemens.com/download?A5W00082967A-001
EN
Hereby, Siemens Schweiz AG declares that the radio equipment
type PXC4xx, PXC5xx is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
:the following internet address
http://www.siemens.com/download?A5W00082967A-001
Industry Canada statement
EN
This device complies with ISED's licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FR
Le présent appareil est conforme aux CNR d'ISED applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptible de provoquer un fonctionnement
indésirable.
Siemens AG, Rastatt (DE) M7219 01.07.2019 3/4
FCC statement
EN
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.-
Increase the separation between the equipment and receiver.-
Connect the equipment into an outlet on a circuit different from that-
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.-
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Changes or modifications not expressly approved by
Siemens Switzerland Ltd. could void the user's authority to operate
the equipment.
United States representative:
https://new.siemens.com/us/en/products/buildingtechnologies/home.html
Siemens AG, Rastatt (DE) M7219 01.07.2019 4/4
Siemens AG2020
C
Radiofrequency radiation exposure statement
EN
This equipment complies with FCC and IC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 20 cm between the
radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
FR
Cet équipement est conforme aux limites d'exposition aux
rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.
Ce transmetteur ne doit pas être placé au même endroit ou utilisé
simultanément avec un autre transmetteur ou antenne.
Open Source Software (OSS)
Software License Summary
EN
These devices incorporate open source software (OSS), please
refer to the OSS document for the specific controller type and valid
version set.
Title: License Summary Climatix C400 Controller - VVS11
All open source software components used within the product
(including their copyright holders and the license conditions) can be
found from the website
http://www.siemens.com/download?A6V11435799
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Siemens M7219 Operating instructions

M7219
Siemens
Brand
Siemens
Model
M7219
Type
Operating instructions

Siemens M7219 is a versatile device designed to help you control and monitor your home's HVAC system. With its user-friendly interface and advanced features, you can easily adjust temperatures, set schedules, and monitor energy consumption, all from the convenience of your smartphone or tablet. It also offers voice control compatibility, allowing you to manage your home's comfort with simple voice commands.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers