Sanyo VCC-P6784 User manual

Brand: Sanyo

Model: VCC-P6784

Category: Security cameras

Type: User manual

INSTRUCTION MANUAL

Color CCD Camera

Caméra CCD couleur

Cámara CCD a color

Please read this manual before installing and using this

camera, and always follow the instructions in it for proper

use. Be sure to keep it handy for later reference.

Avant d’installer et d’utiliser la caméra, veuillez lire avec

attention le présent manuel et respectez toujours les

instructions fournies pour sa bonne utilisation. Gardez-le à

portée de main pour toute référence ultérieure.

Leer este manual antes de instalar y utilizar la cámara y

seguir siempre las instrucciones del mismo para asegurar

un uso correcto. Asegúrese de guardarlo a su alcance para

futuras consultas.

VCC-P6784

Camera SettingsOPTION

L5BY2_US(VCC-P6784)(GB_FR_ES).book 1 ページ２００７年１２月７日　金曜日　午後３時３９分

Contents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Useful Operations . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Connection Examples and Peripheral Devices

(Sold separately) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Part Names. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connecting Devices . . . . . . . . . . . . . . . . . . . . . . . . 7

Basic Connection and Power Connection . . . . . . . . . . . . . . . . . 7

Connecting External Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using the Buttons for Setting and Adjustment . . 10

A L-L Setting (Line Lock) <SYNC>. . . . . . . . . . . . . . . . . . . . . . 18

B Backlight Compensation <BLC> . . . . . . . . . . . . . . . . . . . . . . 18

C Adjusting Iris Level <IRIS> . . . . . . . . . . . . . . . . . . . . . . . . . . 18

D Adjusting White Balance <WHITE BALANCE> . . . . . . . . . . 19

AWC (One-Push) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

MWB (Manual White Balance) . . . . . . . . . . . . . . . . . . . . . . . 19

E Setting Gain Value <AGC GAIN> . . . . . . . . . . . . . . . . . . . . . 20

F Correcting Gamma Characteristic <GAMMA> . . . . . . . . . . . 20

G Specifying Shutter Speed <SHUTTER> . . . . . . . . . . . . . . . . 20

H Accentuating Subject Outline <APERTURE>. . . . . . . . . . . . 20

Getting Started

Learning the Menu Setting Operations . . . . . . . . 11

Selecting Display Language

<OPTION> - <LANGUAGE> . . . . . . . . . . . . . . . . . 13

Naming Cameras <OPTION> - <TITLE> . . . . . . . 14

Password Lock Setting/Canceling

<OPTION> - <PASSWORD> . . . . . . . . . . . . . . . . . 16

Camera Settings

Setting Camera Performance. . . . . . . . . . . . . . . . . 18

☞The contents in angle brackets < > are the menu screen title.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 1 ページ２００７年１２月７日　金曜日　午後３時３９分

Contents

Specifying Alarm Input <ALARM IN> . . . . . . . . . . . . . . . . . . . . . 23

Motion Sensor Setting <MOTION> . . . . . . . . . . . . . . . . . . . . . . 24

ZOOM setting <ZOOM>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

DURATION setting <DURATION>. . . . . . . . . . . . . . . . . . . . . . . 26

ALARM SIGN setting <ALARM SIGN> . . . . . . . . . . . . . . . . . . . 27

Setting Protocol for Camera Controller <CONTROL> . . . . . . . . 28

Setting Camera Address <ADDRESS> . . . . . . . . . . . . . . . . . . . 29

Setting Alarm Output to Communication Line

<ALARM LINE OUT>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Screen Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Option Settings <OPTION>

Hiding Partial Image <PRIVACY MASK>. . . . . . . 21

Setting Alarm <ALARM>. . . . . . . . . . . . . . . . . . . . 23

Configuring the Communication Settings . . . . . 28

L5BY2_US(VCC-P6784)(GB_FR_ES).book 2 ページ２００７年１２月７日　金曜日　午後３時３９分

Precautions

■ In case of a problem

Do not use the unit if smoke or a strange odor comes from the unit, or if it

seems not to function correctly. Turn off the power immediately and

disconnect the power cord, and then consult your dealer or an Authorized

Sanyo Service Center.

■ Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage to

the unit. For repairs, consult your dealer or an Authorized Sanyo Service

Center.

■ Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside the

unit. If used with a foreign object inside, it could cause a fire, a short-circuit

or damage. Be careful to protect the unit from rain, sea water, etc. If water

or liquid gets inside the unit, turn off the power immediately and disconnect

the power cord, and then consult your dealer or an Authorized Sanyo

Service Center.

■ Be careful when handling the unit

To prevent damage, do not drop the unit or subject it to strong shock or

vibration.

■ Do not install this unit close to magnetic fields

The magnetic fields may result in unstable operation.

■ Protect from humidity and dust

To prevent damage, do not install the unit where there is greasy smoke or

steam, where the humidity may get too high, or where there is a lot of dust.

■ Protect from high temperatures

Do not install close to stoves, or other heat sources, such as spotlights,

etc., or where it could be subject to direct sunlight, as this could cause

deformation, discoloration or other damage.

Be careful when installing close to the ceiling, in a kitchen or boiler room,

as the temperature may rise to high levels.

■ Cleaning

• Dirt can be removed from the cabinet by wiping it with a soft cloth. To

remove stains, wipe with a soft cloth moistened with a soft detergent

solution and wrung dry, then dry by wiping with a soft cloth.

• Do not use benzine, thinner or other chemical products on the cabinet,

as this may cause deformation and paint peeling. Before using a

chemical cloth, make sure to read all accompanying instructions. Make

sure that no plastic or rubber material comes into contact with the

cabinet for a long period of time, as this may cause damage or paint

peeling.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 3 ページ２００７年１２月７日　金曜日　午後３時３９分

Useful Operations

■ Putting titles to camera images:

ROPTION → TITLE (see page 14)

■ Capturing clear image of fast-moving subject by

increasing shutter speed:

RSHUTTER (see page 20)

■ Connecting to an external door switch or infrared

sensor:

ROPTION → ALARM (see page 23)

■ Making the unit issue a warning upon detecting

suspicious figures, etc.:

ROPTION → ALARM → MOTION (see page 24)

■ Making the unit record the image at alarm detection:

ROPTION → ALARM LINE OUT (see page 29)

■ Limiting main menu access to administrators:

ROPTION → PASSWORD (see page 16)

■ Hiding image partially for privacy protection:

ROPTION → PRIVACY MASK (see page 21)

■ Operating remotely using a digital video recorder or

controller:

ROPTION → CONTROL (see page 28)

■ Adjusting the zoom (Tele/Wide)

RUse Selection buttons (see page 10).

L5BY2_US(VCC-P6784)(GB_FR_ES).book 4 ページ２００７年１２月７日　金曜日　午後３時３９分

Connection Examples and Peripheral Devices

(Sold separately)

■ For camera setup only

Monitor

Digital Video Recorder

Records Images

Camera

Monitor

Camera Control Unit

Camera

Monitor

Monitors images from the camera.

Also available as settings screen.

Digital Video Recorder

Records images on a hard disk. Highly

recommended for use in your monitoring

system; images can be recorded over an

extended time period and are free from

degradation.

Camera Control Unit (VAC-70)

Simplified remote controller for camera

settings.

Note:

• Make sure to disconnect the unit after

settings are completed.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 5 ページ２００７年１２月７日　金曜日　午後３時３９分

Part Names

ZOOM

COM

ALARM IN

TAB W

RS485

SET

VIDEO OUT

POWER

GND AC24V

DC12V

Rear Panel

Side Panel

Power Input Terminal (AC 24V, DC 12V, GND)

Connects to the power supply. See page 7.

Video Output Terminal (VIDEO OUT)

Connects to the Video Input Terminal

(VIDEO IN) of the monitor or the recorder.

See page 7.

Power Indicator (POWER)

Illuminates red when power is supplied.

RS485 Terminal (RS485 A/B)

Earth Terminal (COM)

Zoom Terminal (ZOOM T/W)

Alarm Input Terminal (ALARM IN)

Connects with external devices.

See page 8.

Selection Buttons

Used to move the cursor during each

setting. See page 11.

SET Button

Used for viewing, switching over and

determining screen for each setting.

See page 11.

Bracket See page 9.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 6 ページ２００７年１２月７日　金曜日　午後３時３９分

Connecting Devices

Connect the video output terminal (VIDEO OUT)

and the video input terminal of the monitor or the

digital video recorder using coaxial cable.

Note:

• If you use a type of cable other than listed above, images and synchronizing

signals may not be transferred properly due to attenuation.

• Do not use coaxial cable RG-59U (3C-2V) for piping or overhead wiring.

Connect the power cable and insert the plug of

the cable into a wall outlet.

Note:

• Make sure to connect an earth wire to an earth terminal (GND).

• Use a UL standard, VW-1 compliant cable to avoid fire risk.

RThe power indicator illuminates red while power is being supplied.

Note:

• Confirm the polarity of the plug: + (positive) and - (negative).

• If long distance is necessary, be sure to use the proper cable so that the voltage

at the power supply terminals falls in the operating range of this unit. A cable of

improper length and/or thickness may cause a significant voltage drop.

RThe power indicator illuminates red while power is being supplied.

Note: • All the power supplied to the system should be turned off when you connect devices.

• Incorrect connections may cause failure and/or smoking; carefully read this and other instruction manuals for each device for proper connections.

Basic Connection and Power Connection

ZOOM

COM

ALARM IN

TAB W

RS485

VIDEO OUT

POWER

GND AC24V

DC12V

Monitor

Digital Video Recorder, etc.

Camera Control Unit

(VAC-70)

• Camera can be controlled

remotely during setting or

adjustment.

Note: Make sure to disconnect

the unit after setting or

adjustment is completed.

VIDEO OUT

Coaxial cable type and maximum length

Cable type RG-59U, 250 m/273 yds maximum

Cable type RG-6U, 500 m/547 yds maximum

Cable type RG-11U, 600 m/656 yds maximum

VIDEO OUT

POWER

GND AC24V

DC12V

ZOOM

COM

ALARM IN

TAB W

RS485

For AC 24 V:

Power Indicator

VIDEO OUT

POWER

GND AC24V

DC12V

ZOOM

COM

ALARM IN

TAB W

RS485

Power Indicator

For DC 12 V:

L5BY2_US(VCC-P6784)(GB_FR_ES).book 7 ページ２００７年１２月７日　金曜日　午後３時３９分

Connecting Devices

Connecting External Devices

VIDEO OUT

POWER

ZOOM

COM

GND AC24V

ALARM IN

TAB W

RS485

Zoom Input Signal

Tele Wide

Alarm Input Signal

Connect the camera to the remote

controller or other communication

devices.

Note:

• For connection, use cables with 24AWG wire or thicker (Maximum length: 600 m/656 yds).

• After connecting alarm devices, configure the alarm settings on this camera.

☞See pages 23, 29.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 8 ページ２００７年１２月７日　金曜日　午後３時３９分

Connecting Devices

Install the camera in a correct location so that the intended object can be monitored properly. You should also adjust on the monitor side.

Note:

• If you want to use a commercially available platform for the camera, select an appropriate type, taking into consideration the gross weight of the

camera and platform, and secure it on a firm place.

• Images may blur under extremely bright lighting; adjust the lighting angle to get clear images.

■ Changing the bracket for mounting the camera

Installing Camera

Note: Make sure to use the longer screws a to secure the bracket.

Bracket

L5BY2_US(VCC-P6784)(GB_FR_ES).book 9 ページ２００７年１２月７日　金曜日　午後３時３９分

Using the Buttons for Setting and Adjustment

You can set and adjust the camera remotely using the optional camera

control unit.

For details, refer to the instruction manual supplied with the VAC-70.

• Be sure to disconnect the camera control unit after you complete

setting up the camera.

• Avoid connecting the camera control unit via a cable compensator or

video distribution amplifier.

Doing so may prevent remote control of your camera.

You can set and adjust the camera directly using the buttons provided on

the camera.

Using the Optional Camera Control Unit (VAC-70) Using the Buttons on the Camera

SET

(VAC-70) (Camera)

■ To display the main menu

VAC-70 : Press the MENU button 1.

Camera : Press and hold the SET button 3 for about 1 second.

■ To set menu items

• Use the Selection buttons 2 to select the item and then

change the set value.

• Press the SET button 3 to go to the preference setting

screen.

■ To adjust the zoom

• Use the Selection buttons 2 when the live video is shown on

the monitor (when no setting screen is displayed).

Zoom In (Tele) : Press c.

Zoom Out (Wide) : Press d.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 10 ページ２００７年１２月７日　金曜日　午後３時３９分

Learning the Menu Setting Operations

Displaying and selecting the menu item

Changing the set value

■ When the y mark is shown to the right of the item

Note: After the expiration of a predetermined time interval (3 minutes)

without any operation, the settings screen goes off automatically

and returns to normal monitoring screen.

SET

SYNC

BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

OPTION

PRESET

OFF

SET

ATW

NORM

0.45

HIGH

SET

OFF

END

Cursor

Displaying

the Main

Selecting the

Menu Item

Press the Selection button UP or DOWN

(the cursor moves) to select the menu item.

Press and hold

the button for

about 1 second.

SYNC

BLC

IRIS

WHITE BALANCE

AGC GAIN

OFF

SET

ATW

NORM

Press the Selection button

RIGHT or LEFT to change

the set value.

Set Value

Changing the

Set Value

SET

SYNC

BLC

IRIS

WHITE BALANCE

AGC GAIN

OFF

SET

AWC

NORM

Press the SET button to

go to the preference

setting screen.

y Mark

Learning the Menu Setting Operations

L5BY2_US(VCC-P6784)(GB_FR_ES).book 11 ページ２００７年１２月７日　金曜日　午後３時３９分

Learning the Menu Setting Operations

Closing the Menu Screen

After you complete setting up the camera, select [MENU], choose

“END”, and press the SET button.

• To return to the previous screen, choose “BACK” and press the

SET button.

■ To reset the menu settings to the defaults (factory

settings)

Select [PRESET], choose “ON”, and press the SET button.

■ Main menu guide

Note:

To reset the settings for all menus to the defaults at once, in the main menu,

select [PRESET], choose “ON”, and press the SET button.

However, doing so does not reset the CONTROL and ADDRESS settings

accessible from [OPTION].

SET

PRESET

OFF

END

PRESET

BACK

SET

Items Settings See page

SYNC

Adjusting Synchronization

BLC

Setting for Backlight Compensation

IRIS

Adjusting Iris Level

WHITE BALANCE

Adjusting White Balance

AGC GAIN

Setting for Gain

GAMMA

Adjusting Gamma

SHUTTER

Setting for Shutter Speed

APERTURE

Adjusting Subject Outline

OPTION

TITLE

Naming Cameras

PRIVACY

MASK

Hiding Image Partially

PASSWORD

Setting/Canceling Password Lock

ALARM

Setting Alarm

LANGUAGE

Selecting Display Language

CONTROL

ADDRESS

ALARM LINE

OUT

Configuring the Communication

Settings

PRESET

Initializing Settings

Closing a Screen/Returning to

Previous Screen

Learning the Menu Setting Operations

L5BY2_US(VCC-P6784)(GB_FR_ES).book 12 ページ２００７年１２月７日　金曜日　午後３時３９分

Selecting Display Language <OPTION> - <LANGUAGE>

You can change the language displayed on the menu and setting screens. (Default setting: English)

Select [OPTION] and press the SET button.

RThe OPTION screen appears.

Select [LANGUAGE] and press the SET button.

Select the desired language and press the SET

button.

RThe settings on the screen are displayed in the selected

language as soon as you press the SET button.

TITLE

PRIVACY MASK

PASSWORD

ALARM

LANGUAGE

CONTROL

ADDRESS

ALARM LINE OUT

PRESET

OFF

SET

COAX

OFF

BACK

OPTION

LANGUAGE

·LANGUE

IDIOMA

ENGLISH

FRENCH

SPANISH

BACK

LANGUE

LANGUAGE ANGLAIS

·LANGUE FRANCAIS

IDIOMA ESPAGNOL

MENU RETOUR

L5BY2_US(VCC-P6784)(GB_FR_ES).book 13 ページ２００７年１２月７日　金曜日　午後３時３９分

Naming Cameras <OPTION> - <TITLE>

You can give a name (title) to each camera. The specified names are displayed on the monitor so that you can easily

distinguish the monitoring images when you use multiple cameras.

Select [OPTION] and press the SET button.

RThe OPTION screen appears.

Set [TITLE] to “ON” and press the SET button.

RThe TITLE SETTING screen appears.

Choose a character(s) from the character

selecting field.

A character is selectable when two arrows, (w) and (y), point at the

character.

☞ Continued to the next page.

TITLE·

PRIVACY MASK

PASSWORD

ALARM

LANGUAGE

CONTROL

ADDRESS

ALARM LINE OUT

PRESET

OFF

SET

COAX

OFF

BACK

OPTION

MEMO:

If you want to overwrite the character, select [ID] and move (x)

onto it in the ID string, and then choose any new letter.

wABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789 :-

ID ????????????????

POSITION

PRESET

SET

OFF

BACK

TITLE SETTING

Character Selecting FieldID string

RThe characters are

displayed starting from (x) in

the ID string.

• You can enter up to

16 characters.

ROOM1

ROOM2

ROOM1 ROOM2

OPTION

L5BY2_US(VCC-P6784)(GB_FR_ES).book 14 ページ２００７年１２月７日　金曜日　午後３時３９分

Naming Cameras <OPTION> - <TITLE>

Repeat step 3 to complete the name and select

[ID].

Example: ROOM1

• The letters “???....” do not appear on the monitoring screen, but

if you select “ON” for [TITLE] and then enter no letter at all, the

monitor will show you “???....”.

Select [POSITION] – “SET” and press the SET

button.

ROn the normal monitoring screen, the name will be displayed.

Determine the display position of the name using

the Selection buttons and then press the SET

button.

RReturns to the settings screen.

■ To delete the name specified:

Set [PRESET] to “ON”, and press the SET button.

RAll the characters will be replaced with “?”.

MEMO:

If you want the name to be displayed on the monitor in two lines,

insert the line feed mark (v) in the “ID string” wherever you want to

start a new line. On the monitor screen, the name will be displayed

in two lines. You can enter up to 16 characters including the line

feed mark (v).

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789 :-v

·ID ROOM1???????????

TITLE SETTING

ID string

ID ROOM1???????????

POSITION

PRESET

SET

OFF

BACK

Note:

• If an alarm signal is input, the camera name on the screen will

blink during the time that has been set in [DURATION] (see page

26). When the camera name is not specified, “???....” will blink.

• When masking setting is “ON”, the camera name will not be

displayed.

ROOM1

L5BY2_US(VCC-P6784)(GB_FR_ES).book 15 ページ２００７年１２月７日　金曜日　午後３時３９分

Password Lock Setting/Canceling <OPTION> - <PASSWORD>

You can lock the accessing the Main menu by specifying a password. You will be prompted to enter the password to access the

Main menu.

Select [OPTION] and press the SET button.

RThe OPTION screen appears.

Select [PASSWORD] and press the SET button.

Select [PASSWORD LOCK] and press the SET

button.

RThe PASSWORD “????” screen appears.

Enter the password (default: 1234) and press the

SET button.

RYou will see the “OK” message.

Press the SET button.

RSets [PASSWORD LOCK] to “ON”.

• “1234” is a factory-preset password; it is recommended you

change it to your own password. Advance to step 6.

• If you want to finish the setting, press the SET button.

☞ Continued to the next page.

TITLE

PRIVACY MASK

PASSWORD

ALARM

LANGUAGE

CONTROL

ADDRESS

ALARM LINE OUT

PRESET

OFF

SET

COAX

OFF

BACK

OPTION

PASSWORD

PASSWORD LOCK·

PASSWORD CHANGE

OFF

SET

PASSWORD

Note: If you enter an incorrect password, you will see the “NG”

message. If you fail to enter the valid password three times

successively, the prompt display will disappear.

PASSWORD

· 1234

SET y

OPTION

L5BY2_US(VCC-P6784)(GB_FR_ES).book 16 ページ２００７年１２月７日　金曜日　午後３時３９分

Password Lock Setting/Canceling <OPTION> - <PASSWORD>

Select [PASSWORD CHANGE] and press the SET

button.

RThe <NOW PASSWORD> “????” screen appears.

Enter the current password and press the SET

button.

RThe <NEW PASSWORD> “????” screen appears.

Enter a new password (4-digit number) and press

the SET button.

☞ Write down the new password before you forget it.

RYou will see the “OK” message.

Press the SET button.

RReturns to the PASSWORD screen.

■ To cancel the password lock

Press the SET button with [PASSWORD LOCK] – “ON”, and then

enter the password. You will see “OFF” instead of “ON”.

PASSWORD

PASSWORD LOCK

PASSWORD CHANGE

SET

PASSWORD

· 1234

SET

L5BY2_US(VCC-P6784)(GB_FR_ES).book 17 ページ２００７年１２月７日　金曜日　午後３時３９分

Setting Camera Performance

Open the screen for setting and adjusting the camera performance.

Adjusting Synchronization (0 – 524).

• Make adjustments so that the vertical synchronization of the monitor

screen does not move up or down.

Correct it by adjusting conditions or

changing correction method.

■ CENT (Center zone metering)

Correction is made based on the optical measurement

that is focused on the central area of the screen (the image of subject to be

corrected is located in the center of the screen).

■ MULT1 (Multi-spot metering, Normal mode)

Correction is made based on the optical measurement and assessment of the

entire screen (the image of subject to be corrected is not limited to a center of the

screen location).

■ MULT2 (Multi-spot metering, High mode)

Compared to MULT1, faster backlight correction is possible against a lesser

amount of light.

■ OFF

No correction is performed for backlight.

Adjust the brightness (iris) (0 – 100).

A L-L Setting (Line Lock) <SYNC>

SYNC·

BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

OPTION

PRESET

L-L

OFF

SET y

ATW

NORM

0.45

HIGH

SET y

OFF

END

☞ See page 19.

☞ See page 20.

· 250

L-L SETTING

B Backlight Compensation <BLC>

C Adjusting Iris Level <IRIS>

Note:

• Under extremely bright lighting, unfavorable phenomena may occur such

as swaths of smear on the screen, because light intensity entering the

lens is too high to be controlled. Reduce the intensity by changing the

angle of the lighting source or by other means.

• If the images of subjects under fluorescent lighting are flickering, replace

fluorescent lighting with incandescent lighting.

IRIS SETTING

<LEVEL>

· 20

• The greater the number, the brighter it

gets.

Camera Settings

L5BY2_US(VCC-P6784)(GB_FR_ES).book 18 ページ２００７年１２月７日　金曜日　午後３時３９分

Setting Camera Performance

With its default Auto-tracing White Balance (ATW) setting, this unit

is able to obtain natural colors even when the light source is

changed. However, you may manually change the white balance

settings or its mode to obtain better tone, especially when the

screen color does not match actual objects.

■ ATW (Auto-Tracing White balance)

Automatic setting for white balance.

■ AWC (One-Push Adjustment)

Adjusts white balance by shooting white paper or wall.

■ 3200 (Halogen light or incandescent lamp, etc.) (Fixed)

Targeted at around 3200 K of color temperature.

■ 5600 (Daytime sunlight) (Fixed)

Targeted at around 5600 K of color temperature.

■ FLUO (Fluorescent lamp) (Fixed)

Targeted at around 4200 K of color temperature.

■ MWB (Manual White Balance)

Fine-adjusts red and blue manually.

Select [AWC LOCK] and, with the camera lens directed toward a

white paper or wall, press the SET button.

RThe cursor “q” lights off, and white balance adjustment will start. The

adjustment will end after about 2 seconds when “q” lights again.

• If the adjustment does not yield a satisfactory result, press the SET

button again.

■ To perform fine adjustment of color

Select [GO TO MWB] and press the SET button.

RThe MWB SETTING screen appears. Follow the MWB SETTING

procedure below.

• The setting mode changes to “MWB”.

Select “R” or “B” to adjust tint (0 – 255).

D Adjusting White Balance <WHITE BALANCE>

SYNC·

BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

OPTION

L-L

OFF

SET y

ATW

NORM

0.45

HIGH

ET y

AWC (One-Push)

AWC SETTING

AWC LOCK·

GO TO MWB

SET

White paper or wall

MWB (Manual White Balance)

MWB SETTING

· R 43

B 66

R : Adjusting Red

B : Adjusting Blue

• The greater the number, the

deeper the tint becomes.

L5BY2_US(VCC-P6784)(GB_FR_ES).book 19 ページ２００７年１２月７日　金曜日　午後３時３９分

Page is loading ...

Sanyo VCC-P6784 User manual

Brand: Sanyo

Model: VCC-P6784

Category: Security cameras

Type: User manual

Download PDF

report

in other languages

français: Sanyo VCC-P6784 Manuel utilisateur
español: Sanyo VCC-P6784 Manual de usuario

Sanyo VCC-P6784 User manual

Sanyo VCC-P6784 User manual

in other languages

Related papers

Other documents