Mobi Technologies ROOMMATE 70193 User manual

Type
User manual

This manual is also suitable for

Multi-Color Night Lamp
Set-up
Insert Pin Plug (A) of AC Adapter (B) into Connection Port (C) on
back side of the lamp Base (D) and then insert Adapter Plug (E)
into a regular household power outlet.
Place the RoomMate
Lamp (F) onto a clean, dry, level surface such
as the top of a desk, table, nightstand,
shelf,or dresser.
DO NOT PLACE THE LAMP OR THE AC
ADAPTER CORD ONTO ANY BEDDING,
PILLOWS, OR CHAIRS; IT IS NOT A TOY.
AS WITH ALL ELECTRICAL PRODUCTS
USE OF THE ROOMMATE
REQUIRES
ADULT SUPERVISION.
Switching Sequence
Turn it ON
Press and release the On/O Button (G) on the lamp
Base (D). It will instantly illuminate, initially set to GREEN.
Change Colors
When the lamp is green, press the Color Mode Button (H)
and it will change to BLUE.
Press the Color Mode (H) again and it will change to RED.
Press the Color Mode (H) once more and the illumination
will change to rainbow cycling MULTI-COLOR.
Continuing to press and release the Color Mode (H) will
sequence through the single and rainbow color modes in the same order as described above.
Turn it OFF
When the RoomMate
is on, in any color mode, you may press and release the On/O Button (G) again and it will instantly
switch to OFF.
Fade to OFF with 15-minute timer
The RoomMate
can be set to automatically dim to OFF after 15 minutes, which can help children fall asleep or be used to
time reading or other bedtime activities. When the lamp is on, and in any color mode, simply press and hold down the
On/O Button (G) until the Timer-On Indicator (I) lights up red. This way, instead of turning the lamp o at that moment,
you will know in 15 minutes the RoomMate
will gently fade to OFF.
Item # 70193
Care
To clean the outer surfaces simply wipe with a lightly damp cloth. Do not spray or pour dripping liquids onto any part of the
lamp or get it wet in any way other than damp cloth cleaning as described.
Safety
Keep your RoomMate
Multi-Color Night Lamp away from open ames or extreme heat. As described in the Set-up section,
do not use the lamp on any surface, area, or material not intended for supporting a lamp. Use only in areas that are dry and
clean. Never plug any electrical product into circuits that would exceed the maximum electrical load for its use.
Specification
Product Name: TykeLight
®
RoomMate
Model: 70193
Dimensions : 6.75 x 7.25 x 4.75 inches
Weight: 14 oz
Parts Included
RoomMate
Multi-Color Night Lamp –– 1 pc
RoomMate
AC Adapter –– 1 pc
Instructions –– 1 pc
Limited Warranty
Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety
(90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period,
Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service
charge will be applied for replacement of parts or labor for repair. To obtain warranty service please return the product to
Mobi® along with a dated sales receipt from the place of purchase. This warranty does not cover damage caused by acci-
dent, misuse, abuse, improper maintenance, unauthorized modication, or connection to an improper power supply. A
charge will be made for repair of such damage. This warranty excludes all incidental or consequential damages and any
liability other than what is stated above.
Mobi Technologies, Inc.
5913 Blackwelder Street
Culver City, CA 90232
www.getmobi.com
Mobi, TykeLight, and RoomMate are trademarks of Mobi Technologies, Inc.
© 2009 Mobi Technologies, Inc. All Rights Reserved
  • Page 1 1
  • Page 2 2

Mobi Technologies ROOMMATE 70193 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI