Randell 2030P is a reach-in, pass-thru, three-section refrigerator with a top-mounted compressor and evaporator coil. It has an expansion valve system with thermostatic control, factory tested and balanced to maintain an average interior temperature of 38° F. The evaporator coil is coated to resist corrosion. The unit comes with a master on/off switch and 8' cord and plug. Access to service points without tools is standard.
The refrigerator has a fully coved interior that meets N.S.F. standard #7. The interior walls, ceiling, and door liner are available in either stainless steel or anodized aluminum. It has foamed-in-place, CFC-free urethane insulation. Snap-in A.B.S. breaker strips allow access to condensate heater wires.
Randell 2030P is a reach-in, pass-thru, three-section refrigerator with a top-mounted compressor and evaporator coil. It has an expansion valve system with thermostatic control, factory tested and balanced to maintain an average interior temperature of 38° F. The evaporator coil is coated to resist corrosion. The unit comes with a master on/off switch and 8' cord and plug. Access to service points without tools is standard.
The refrigerator has a fully coved interior that meets N.S.F. standard #7. The interior walls, ceiling, and door liner are available in either stainless steel or anodized aluminum. It has foamed-in-place, CFC-free urethane insulation. Snap-in A.B.S. breaker strips allow access to condensate heater wires.
Randell 2030P is a reach-in, pass-thru, three-section refrigerator with a top-mounted compressor and evaporator coil. It has an expansion valve system with thermostatic control, factory tested and balanced to maintain an average interior temperature of 38° F. The evaporator coil is coated to resist corrosion. The unit comes with a master on/off switch and 8' cord and plug. Access to service points without tools is standard.
The refrigerator has a fully coved interior that meets N.S.F. standard #7. The interior walls, ceiling, and door liner are available in either stainless steel or anodized aluminum. It has foamed-in-place, CFC-free urethane insulation. Snap-in A.B.S. breaker strips allow access to condensate heater wires.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI