THANK YOU
We appreciate your trust and confidence in Hampton Bay with your purchase of this light fixture. At Hampton Bay we make quality
products to help you improve your home and give you peace of mind about your choice. Don’t forget to visit our website for other
Hampton Bay products. We hope you enjoy this new addition to your home and thanks again for choosing Hampton Bay.
Model #HDP11958
USE AND CARE GUIDE
CHESTER MINI-PENDANT LIGHT
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
2
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 2
Pre-Installation .............................................................. 3
Assembly ....................................................................... 5
Installation ..................................................................... 6
Care and Cleaning ........................................................ 7
Troubleshooting ............................................................ 7
Safet
y
Information
IMPORTANT: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have occurred
during shipping. If there is a defect in the wire, do not
continue the assembly process. Please call our Customer
Service Team at 1-877-527-0313.
Warrant
y
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one
(1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used
in normal use and service. If this product is found to be defective, the manufacturer's only obligation, and your exclusive
remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the product has not
been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall
not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance
with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an
accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specifically disclaims
any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein.
The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.
□ Consult a qualified electrician with any electrical
questions you may have.
www.hamptonbay.com
3 Please contact 1-877-527-0313 for further assistance.
Pre-Installation
PLANNING FOR SUCCESSFUL INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-
abrasive surface such as carpet or cardboard. Inspect each
part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of
purchase.
TOOLS REQUIRED
Safety
goggles
Wire strippers
Wire
cutters
Flathead
screwdriver
Phillips screwdriver
Ladder
MATERIALS REQUIRED
100-Watt max.
type A bulb
Electrical tape
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA
Wire nut 3
BB
Mounting plate 1
CC
Outlet box screw 2
DD
Mounting screw 2
EE
Ground screw 1
FF
Small nut 2
GND
AA BB CC DD EE FF
4
Pre-Installation
(
continued
)
PACKAGE CONTENTS
Part Description Quantity
A
Canopy
1
B
Ball finial
2
C
12” tube
3
D
6” tube
1
E
Fixture body
1
F
Shade
1
G
Socket ring
1
A
B
D
E
F
G
C
www.hamptonbay.com
5 Please contact 1-877-527-0313 for further assistance.
Assembl
y
1
Assembling the tubes and body to
the canopy
2
Attaching the shade
□ Feed the fixture body (E) wires up through the 6”
tube (D) and then the 12” tubes (C). The number of
12” tubes you use depends on the length you
desire for the installed light fixture.
□ Attach the desired number of tubes (C and D) to
the fixture body by twisting the tubes in a clockwise
direction.
□ Attach the canopy (A) to the end of the tube
assembly by twisting in a clockwise direction.
□ Place the shade (F) over the socket in the fixture
body (E) and secure with the socket ring (G).
□ Install a 100-watt max. medium-base type A bulb
(not included) into the socket.
A
D
E
C
E
F
G
6
Installation
1
Installing the mounting plate
□ Turn the power off at the main fuse box.
□ Screw two mounting screws (DD) into the holes in
the mounting plate (BB). Make sure they line up
with the holes in the canopy (A).
□ Secure with two small nuts (FF).
□ Attach the mounting plate (BB) to the ceiling outlet
box using the outlet box screws (CC).
2
Connecting the wires
3
Installing the fixture
□ Install the fixture copper ground wire (GG) under
the ground screw (EE) on the mounting plate (BB).
□ Connect the fixture and supply copper ground
wires (GG) in the outlet box using a wire nut (AA).
□ Connect the white fixture and supply wires (HH) in
the outlet box using a wire nut (AA).
□ Connect the black fixture and supply wires (II) in
the outlet box using a wire nut (AA).
□ Push all excess wires into the outlet box.
□ Raise the fixture to the ceiling and secure the
canopy (A) in place with ball finials (B).
DD
BB
A
FF
CC
BB
GG
HH
II
EE
AA
AA
AA
A
B
www.hamptonbay.com
7 Please contact 1-877-527-0313 for further assistance.
Care and Cleanin
g
Troubleshootin
g
Problem Possible Cause Solution
The bulb will not light.
The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty wire connection. Check the wiring.
The circuit breaker is off. Ensure the circuit breaker is set in the On
position.
The fuse blows or a
circuit breaker trips
when the light is turned
on.
There is an exposed wire.
There are too many items on one circuit.
Discontinue use of the light fixture.
Contact a qualified electrician or call the
Customer Service Team at 1-877-527-
0313.
□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
