Hampton Bay HDP11959 Installation guide

Brand: Hampton Bay

Model: HDP11959

Type: Installation guide

Hampton Bay HDP11959 is a single candle sconce light fixture, compatible with candelabra-base type B bulbs up to 60 watts (not included). It is a relatively easy to install the light fixture, which can be mounted to a wall with the included mounting hardware. This light fixture has a classic design that can complement a variety of décor styles, making it a versatile choice for your home lighting needs. Here are some of the key features and possible use cases for this light fixture:

Classic design: The HDP11959 has a timeless design that can complement a variety of décor styles, making it a versatile choice for your home lighting needs.

Classic design: The HDP11959 has a timeless design that can complement a variety of décor styles, making it a versatile choice for your home lighting needs.

THANK YOU

We appreciate your trust and confidence in Hampton Bay with your purchase of this light fixture. At Hampton Bay we make quality

products to help you improve your home and give you peace of mind about your choice. Don’t forget to visit our website for other

Hampton Bay products. We hope you enjoy this new addition to your home and thanks again for choosing Hampton Bay.

Model #HDP11959

USE AND CARE GUIDE

CHESTER SCONCE CANDLE LIGHT FIXTURE

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

Table of Contents

Table of Contents .......................................................... 2



Safety Information ......................................................... 2



Warranty ......................................................................... 2



Pre-Installation .............................................................. 3



Assembly ....................................................................... 5



Installation ..................................................................... 5



Care and Cleaning ........................................................ 6



Troubleshooting ............................................................ 6



Safet

Information

IMPORTANT: Inspect the wire insulation for any cuts,

abrasions, or exposed copper that may have occurred

during shipping. If there is a defect in the wire, do not

continue the assembly process. Please call our Customer

Service Team at 1-877-527-0313.

Warrant

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one

(1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used

in normal use and service. If this product is found to be defective, the manufacturer's only obligation, and your exclusive

remedy, is the repair or replacement of the product at the manufacturer's discretion, provided that the product has not

been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall

not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance

with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an

accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or

workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or

weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specifically disclaims

any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein.

The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or

damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.

□ Consult a qualified electrician with any electrical

questions you may have.

www.hamptonbay.com

3 Please contact 1-877-527-0313 for further assistance.

Pre-Installation

PLANNING FOR SUCCESSFUL INSTALLATION

Read all instructions before assembly.

To avoid damaging this product, assemble it on a soft, non-

abrasive surface such as carpet or cardboard. Inspect each

part for defects that may have occurred during shipping.

Keep your receipt and these instructions for proof of

purchase.

TOOLS REQUIRED

Safety

goggles

Wire strippers

Wire

cutters

Flathead

screwdriver

Phillips screwdriver

Ladder

MATERIALS REQUIRED

60-watt max.

candelabra-base

type B bulb

Electrical tape

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

Wire nut 3

Mounting plate 1

Outlet box screw 2

Mounting screw 2

Ground screw 1

Small nut 2

GND

AA BB CC DD EE FF

Pre-Installation

(

continued

)

PACKAGE CONTENTS

Part Description Quantity

Light fixture

Candle sleeve

Ball finial

www.hamptonbay.com

5 Please contact 1-877-527-0313 for further assistance.

Assembl

Assembling the light fixture

□ Slide the candle sleeve (B) over the socket on the

light fixture (A).

□ Install a 60-watt max. candelabra-base type B bulb

(not included) into the socket.

Installation

Installing the mounting plate

Connecting the wires

□ Turn the power off at the main fuse box.

□ Screw two mounting screws (DD) into the holes in

the mounting plate (BB). Make sure they line up

with the holes in the backplate portion of the light

fixture (A).

□ Secure with two small nuts (FF).

□ Attach the mounting plate (BB) to the outlet box

using the outlet box screws (CC).

□ Install the fixture copper ground wire (GG) under

the ground screw (EE) on the mounting plate (BB).

□ Connect the fixture and supply copper ground

wires (GG) in the outlet box using a wire nut (AA).

□ Connect the white fixture and supply wires (HH) in

the outlet box using a wire nut (AA).

□ Connect the black fixture and black supply (or red)

wires (II) in the outlet box using a wire nut (AA).

Installation

(

continued

)

Care and Cleanin

Troubleshootin

Problem Possible Cause Solution

The bulb will not light.

 The bulb is burned out.  Replace the light bulb.

 The power is off.  Ensure the power supply is turned on.

 There is a faulty wire connection.  Check the wiring.

 The circuit breaker is off.  Ensure the circuit breaker is set in the On

position.

The fuse blows or a

circuit breaker trips

when the light is turned

on.

 There is an exposed wire.

 There are too many items on one circuit.

 Discontinue use of the light fixture.

 Contact a qualified electrician or call the

Customer Service Team at 1-877-527-

0313.

Installing the fixture

□ Push all excess wires into the outlet box.

□ Place the fixture on the wall and secure it with ball

finials (C).

□ Clean the light fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.

www.hamptonbay.com

7 Please contact 1-877-527-0313 for further assistance.

This page intentionally left blank

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

Retain this manual for future use.

Page is loading ...

Hampton Bay HDP11959 Installation guide

Brand: Hampton Bay

Model: HDP11959

Type: Installation guide

Classic design: The HDP11959 has a timeless design that can complement a variety of décor styles, making it a versatile choice for your home lighting needs.

Download PDF

report