Exagerate XMHL100 User manual

Type
User manual

This manual is also suitable for

MHL CABLE
Micro USB to HDMI Adapter
USER MANUAL
XMHL100
www.hamletcom.com
Dear Customer,
thanks for choosing an Hamlet product. Please carefully
follow the instructions for its use and maintenance and,
once this item has run its life span, we kindly ask You to
dispose of it in an environmentally friendly way, by
putting it in the separate bins for electrical/electronic
waste, or to bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and
components in compliance with ROHS directives: 2002/95/CE; with
RAEE Directives: 2003/96/CE, Italian Legislative Decree 2005/151
and below EEC Directives:
EN55022: 2010
EN55024: 2010
The complete CE declaration of conformity of the product can be
obtained by contacting Hamlet at info@hamletcom.com.
The information on the importer for your country are available in the
“About Us” section of the Hamlet website at www.hamletcom.com.
Trademarks
All trademarks and company names mentioned in this manual are
used for description purpose only and remain property of their
respective owners.
Changes
The material in this document is for information only and subject to
change without notice. Specifications and appearance are subject
to change without prior notice.
Introduction
The new Exagerate MHL-HDMI cable adapter allows you to easily
connect a smartphone, tablet PC or other MHL enabled device to
an HDMI TV using an HDMI cable*.
Installation
1. With the power to the TV off, connect an HDMI cable from the
HDMI port on the MHL adapter to your HDMI TV or other HDMI
device.
Note: Supplying power to the connected MHL source device will
allow the source device to remain charged while being used. Use
the charger supplied or approved by the manufacturer of your
mobile device.
2. If power to the MHL device is desired, connect the USB Micro-B
cable from your mobile devices supplied travel charger to the
charge port on the side of the adapter. See note below.
3. Plug your mobile device’s supplied travel charger into a power
source.
4. With the MHL enabled device turned off, connect the MHL
adapter’s USB Micro-B connector to the MHL enabled source
device.
5. Turn on the TV and MHL source device.
6. Configure the TV to the HDMI input being used. Refer to the
TV’s instructions for more information.
7. If needed, configure your MHL enabled device to output audio
and/or video through the MHL connector. Refer to the source
device’s instruction manual for more information on enabling
the MHL output.
Note: The use of a power adapter is dependent upon the source
device's ability to supply power from its USB Micro-B port.
*HDMI cable sold separately
Specifications
HDMI type-A video output
Micro USB connector for smartphone and tablet pc
HD Video up to 1080p
Digital Audio up to 7.1
Optimized for the latest MHL enabled smartphones and tablets
Compact and portable design
Provides power to mobile devices (via micro USB port)
Digital rights protection using HDCP
Fully Plug & Play installation
Cable length: approx. 21 cm
Weight: 25 g
Product appearance and specifications are subject to change
without notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Exagerate XMHL100 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI