www.lg.com
OWNER'S MANUAL
Colour Television
Chassis : CW91A/C/D
P/No. :MFL63260401 (04)
3
9
10
13
15
18
19
23
25
27
PSM (Picture Status Memory) / XDP Demo (option) / CSM (Colour Status Memory)
Picture adjustment / Eye (option) / Picture format (ARC) (option)
Excellent digital picture selection
Equalizer / Tune /Sleep Timer / X-sort
Adding a program to a desired category
2
Programme Edit / Deleting a programme / Copying a programme
Moving a programme / Skipping a programme
Auto Programme / Manual Search
6
Important Precautions
Safety/Installation
8
Sound adjustment / XDS selection (option) / AVL (option) / Balance adjustment/ Equalizer/
Sound frequency adjustment / Sound output selection / Stereo /Dual reception (option)
Mono sound selection (option) / Language selection for dual language broadcast (option)
NICAM reception (option)
/ Signal (option) / Signal level description / Music Mode
S- Video/Audio in sockets (S-AV) (option)
Headphone socket (option)
Channel Selection (option)
Warranty Card
3
Important Precautions
Make sure to insert the power plug completely. If power
cable is not fixed completely, a fire can break out .
Do not pull out the power cord. Always Pull out by the
power plug. Do not touch the plug with wet hands. Do
not damage the power cord.
Do not unplug the power cord while the product is in
use. Do not use the power plug to turn the product
ON/OFF. Electric shock can damage the product.
Do not overload AC outlets by plugging too many
appliances in the same socket or extension cords.
They may result in a shock or fire hazard.
Never leave the TV set “ON”/“STANDBY” when
leaving the house. Unplug the TV before moving it or if
you are not going to use it for several days or during
lightning storms.
For Own safety, Never touch any part of product, the
power cord, and the antenna cable during lightning
storms. You may be electrocuted.
TV sets are provided with ventilation holes to allow the
release of heat generated. Make sure that these holes
are not blocked. Do not install the product in a confined
place, such as book case or built in cabinet .
Do not place any object filled with liquid such as Vases,
cup, glass etc on the TV set. Do not place the lighted
candles on the TV set. This may cause fire or an
electric shock hazard.
This unit has been engineered and manufactured to assure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In order
to allow the proper operation of all safeguards incorporated in this TV set, observe
the following basic rules for its installation, use and servicing. Keep it in an accessible
place for future reference. (TV operating voltage is : 110V ~ 240V AC)
4
Important Precautions
To avoid battery leakage and damage to the remote, remove the batteries from
the remote if you are not going to use it for several days. If any liquid leaks from
the batteries and touches your skin, immediately wash it away with water.
Battery Installation: The remote control Handset is powered by two AA/ AAA
batteries. To Load the Batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as per the polarity symbols
( and ) marked inside the battery compartment .
Do Not use the stabilizer, as this set has a In built stabilizer. Use of External
Inferior Quality stabilizer may damage your product .
•
•
Do not allow children to climb over it. If the
product falls / collapses, you may be hurt. Do not
drop or push objects (like coins, hair pins etc) into
the TV cabinet openings. Some internal parts
carry hazardous voltages.
Do not attempt to open the product. There are
dangerous High Voltages inside. Refer to
Servicing through Qualified Personnel if the TV is
not operating properly.
If you can smell a smoke or other odors or hear a
strange sound unplug the power cord and contact
the service center. If you continue to use, electric
shock can occur.
Do not place the product where it might be
exposed to excessive heat, sunlight, rain or
moisture.
Avoid personal injury / set damage by Installing
the product on a flat and stable place that can
support the weight of the set and has no risk of
dropping the product.
While cleaning the product, Unplug the Power
cord and clean with dry & soft cloth. Do not use
thinner, aerosol or any other chemical to clean .
• cSVjh yhdst vkSj fjeksV dks uqdlku ls cpkus ds fy,] tc vki fjeksV dks dbZ fnuksa rd bLrseky ugha djus okys gksa rks cSVfj;ksa dks mlesa
ls fudky nsaA vxj cSVfj;ksa ls dksbZ rjy inkFkZ fjldj vkidh Ropk ij yx tkrk gS] rks rRdky bls ikuh ls /kks nsaA
Ñi;k [kqn dks pksV ls vkSj mRikn dks uqdlku ls cpkuk lqfuf'pr djus ds fy, bu funsZ'kksa dk ges'kk ikyu djsaA
• fp=k vkids mRikn ls FkksM+k fHkUu gks ldrk gS] D;ksafd ;g flQZ funsZ'kksa dks le>us esa enn ds fy, ,d mnkgj.k gSA
• Vhoh dk vkWijsfVax oksYVst gS% 110 - 240 V ,lhA
• LVsfcykbt+j dk iz;ksx ugha djsa] D;ksafd bl lsV esa fcYV bu LVsfcykbt+j gSA ?kfV;k DokfyVh ds ckgjh LVsfcykbt+j ds iz;ksx ls vkids
mRikn dks uqdlku igqap ldrk gSA
lqfuf'pr djsa fd ikWoj Iyx vPNh rjg ls yx
x;k gSA ;fn ikWoj Iyx Bhd ls ugha yxk gS rks
vkx yx ldrh gSA
,d gh lkWdsV vFkok ,DlVsa'ku dkWMZ esa dbZ
midj.k yxkdj ,lh vkmVysV dks vksojyksM
u djsaA ugha rks >Vdk yx ldrk gS ;k vkx
yx ldrh gSA
vka/kh&rwQku ds nkSjku viuh lqj{kk ds fy,]
midj.k ds fdlh fgLls dks] ikWoj dkWMZ dks ;k
,aVhuk ds rkj dks u Nq,aA vkidks fctyh dk
>Vdk yx ldrk gSA
?kj ls fudyrs le; Vhoh dks dHkh ^^vkWu**
LVSaMck; u NksM+saA Vhoh dks f[kldkus ls igys
vFkok ;fn vki dqN fnuksa rd Vhoh dk
bLrseky ugha djus okys gSa vFkok vka/kh&rwQku
ds nkSjku Vhoh dk Iyx fudky nsaA
mRikn dks ogka u j[ksa tgka ml ij csgn xehZ]
/kwi] o"kkZ ;k ueh dk vlj gks ldrk gksA
tc mRikn dks bLrseky dj jgs gksa rks ikWoj
Iyx dks u fudkysaaA mRikn dks vkWu@vkWQ
djus ds fy, ikWoj Iyx dk bLrseky u djsaA
fctyh dk >Vdk mRikn dks {kfr igqapk ldrk
gSA
Vhoh lsV ij ;k rjy inkFkZ ls Hkjh phtsa tSls
Qwynku] di] fxykl vkfn ;k tyh gqbZ
eksecfÙk;ka u j[ksaA blls vkx yx ldrh gS ;k
fctyh dk >Vdk yx ldrk gSA
vxj vkidks /kq,a dh ;k dksbZ vkSj xa/k vk, ;k
dksbZ vthc vkokt+ lqukbZ nsa] rks dks
Iyx ls fudky nsa vkSj lfoZl lsaVj ls laidZ
djsaA vxj vki bLrseky tkjh j[krs gSa rks
fctyh dk >Vdk yx ldrk gSA
ikWoj dkWMZ
mRikn dks [kksyus dh dksf'k'k u djsaA blds
Hkhrj [krjukd gkbZ oksYVst gksrs gSaA vxj Vhoh
Bhd ls dke u dj jgk gks] rks ;ksX;rkizkIr
dfeZ;ksa ls lfoZflax djk,aA
[kqn dks pksV@lsV dks uqdlku ls cpkus ds fy,
mRikn dks ,sls lery vkSj fLFkj LFkku ij j[ksa
tks lsV dk otu laHkky ldrk gks vkSj mRikn
ds fxjus dk [krjk u gksA
mRikn dks lkQ djrs le; dks
udky nsa vkSj lkQ lw[ks diM+s ls iksaNsaA lkQ
djus ds fy, fFkuj] ,vjkslksy ;k fdlh vU;
dsfedy dk iz;ksx u djsaA
ikWoj Iyx
f
iSnk gksus okyh xehZ ds fudyus ds fy, Vhoh
lsVksa esa osafVys'ku fNnz cus gksrs gSaA ;g
lqfuf'pr djsa fd ;s fNnz can u gksaA mRikn dks
cqd dsl ;k fcYV bu dSfcusV tSlh can txgksa
ij baLVky u djsaA
cPpksa dks blds Åij u p<+us nsaA vxj mRikn
fxjrk@<g tkrk gS] rks vkidks pksV yx ldrh
gSA Vhoh dSfcusV ds Nsnksa esa dksbZ pht ¼tSls
flDds] gs;jfiu vkfn½ u fxjk,a vkSj u ?kqlk,aA
dqN Hkhrjh ikVZ~l esa [krjukd oksYVst gksrs gSA
ikWoj dkWMZ dks [khapsa ughaA ges'kk ikWoj Iyx
dks idM+dj [khapsA xhys gkFkksa ls Iyx dks u
Nq,aA ikWoj dkWMZ dks {kfr u igqapk,aA
lqj{kk funsZ'k
5
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
1
9
19
2
3
5
6
16
21
13
7
10
12
4
8
20
14
11
15
17
18
(Option-1)
(Option-2)
4. EYE/ (option)
Switches the eye function On or Off.
5. / (Programme Up/Down)
Selects a programme or a menu item.
Switches the set On from standby.
If X-Sort is On, switches to the next
Programme in the same group.
(Volume Up/Down)
Adjusts the volume.
Adjusts menu settings.
OK accepts your selection or displays the current mode.
All the functions can be controlled with the remote control handset. Some
functions can also be adjusted with the buttons on the front panel of the set.
Remote control handset
Before you use the remote control handset, please install the batteries. See
the previous page.
1. POWER
Switches the set from On to standby or standby to On.
2. NUMBER BUTTONS
Switches the set On from standby or directly select a Programme number.
3. MENU
Selects a menu.
6. Q. VIEW
Returns to the previously viewed programme.
7. PSM (Picture Status Memory)
Recalls your preferred picture setting.
8. XDP
Selects Excellent Digital Picture.
9. MUTE
Switches the sound On or Off.
10. TV/AV
Selects TV or AV mode.
Switches the set On from Standby.
11. I/II (option)
Selects the language during dual language broadcast (option).
Selects the sound output in AV mode.
12. LIST/X-LIST* (option)
Displays the programme table. Press LIST / X-LIST* key again to clear
the LIST / X-LIST* table from the screen.
13. SLEEP
Sets the sleep timer.
14. SSM/* (option) (Sound Status Memory)
Recalls your preferred sound setting.
15. ARC
Change picture format (Normal/Zoom).
16. FAV. / X-SORT* (option)
Pressing each time this button will select a stored favourite programme.
X-SORT switches X- SORT (option) On/Off.
*
COLOURED BUTTONS : When Menu is On, these buttons are used
for programme edit.
Remarks : 1. Some keys in remote can be non-functional, these keys
are used in other models & marked with*.
2. Colour keys will not work as direct access keys during X-Sort On mode.
# Remote Design / Aesthetic may vary from model to model.
# Turbo Sound is equivalent to XDS.
17. MM
Selects music mode.
18. A. WOOFER/* (option)
irect access key for woofer on/off.
B. USB
USB mode.
D
TO enter into
19. EQ/* (option)
Direct access key to select EQ (Graphics Equalizer).
20. XDS/*
elects excellent digital surround.
(option)
S
21. TUNE/* (option)
Direct access key for auto search.
6
VOL
PR
MENU
SELECT
POWER
MUTE
MUSIC
/ EQ*
MOVIES
/ MM/ USB
DRAMA
/ ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT/*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
VOL- VOL+ ZOOM
U
S
B
ESC
2
5
9
3
10
15
4
21
16
7
12
8
14
11
20
6
13
1
19
18
17
FRONT PANEL / SIDE PANEL (Option)
Shown below is a simplified representation of front or side panel, here shown may be somewhat different from your set.
7
O n.
O n or Off.
O n
If X-Sort is On, switches to the next
programme in the same group.
On Off
S-VIDEO/AUDIO IN SOCKET (S-AV) (option)
Connect the video out socket of an
S-VIDEO V CR/DVD to the S-VIDEO socket.
Connect the audio out sockets of the
S-VIDEO V CR/DVD to the audio sockets as
in AV-2.
8. HEADPHONE SOCKET (option)
Connect the headphone plug to this socket.
(option)
ON/OFF
MENU
OK
VOL
PR
1 2 35 4
29FC8 series
9
S VIDEO
L/MONOVIDEO
AUDIO
R
6
8
AV3
7
S VIDEO
L/MONOVIDEO
AUDIO
R
6
8
AV3
7
S VIDEO
L/MONOVIDEO
AUDIO
R
6
8
AV3
7
S VIDEO
L/MONOVIDEO
AUDIO
R
6
8
AV3
7
5
9
21
3
4
29FD7 /29FU8 series
ON/OFF
MENU
OK
VOL
PR
1
2
35 4
9
MENU
OK
ON/OFF
1
3
4
29FD5 series
4 2
9
PR
VOL
5
Common
3
4
AV3
6
10
29FU6 series
3
4
1
5
2
21FU6 series
1
5
2
21SA1 series
L/
M
O
N
O
VIDEO
O
A
UD
I
6
R
3
4
AV2
VIDEO
6
AUDIO
L
R
3
4
1
21SA2 series
1
5
2
SWIVEL STAND
This feature is available with 21SA1model only.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 15
degrees to suit your viewing position.
52
10
8
You can cancel it by pressing the MUTE, SSM/*, AVL, XDS/*
button.
Display (Option)
On and Off
O n
O n
O n
O ff.
Off
Press button to select desired language.
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
Q. VIEW
LANGUAGE.
SPECIAL
SPECIAL
9
COLOUR SYSTEM
SOUND SYSTEM
AUTO PROGRAMME
MANUAL SEARCH
PROGRAMME EDIT
CHANNEL
STORAGE FROM
FINE
PROGRAMME
AUTO
BG
TO START
TO SET
1
PICTURE
PSM
XDP DEMO
CSM
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
STANDARD
STANDARD
TO START
80
55
55
60
TIME
CLOCK
OFF TIME
ON TIME
ON TIME VOLUME
AUTO SLEEP
OFF
30
OK MENU
OK MENU
LANGUAGE
INPUT
CHILD LOCK
DEGAUSS
BLUE BACK
SIGNAL
ENGLISH
TV
OFF
OFF
ON
ON
OK MENU
OK MENU
PROGRAMME EDIT
COPY
DELETE
MOVE
SKIP
OK MENU
SSM
XDS
AVL
BALANCE
EQUALIZER
FLAT
OFF
OFF
0
SOUND
OK MENU
TO SET
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
Note :
a. In the teletext mode, menus are not displayed.
b. In some models DEGAUSS will not display.
c. In AV mode, BLUE BACK, SIGNAL will not display.
V-UHF 34
COLOUR SYSTEM
SOUND SYSTEM
MANUAL SEARCH
PROGRAMME EDIT
CHANNEL
STORAGE FROM
FINE
PROGRAMME
AUTO
TO SET
V-UHF 34
1
COLOUR SYSTEM
SOUND SYSTEM
AUTO PROGRAMME
MANUAL SEARCH
PROGRAMME EDIT
CHANNEL
STORAGE FROM
FINE
PROGRAMME
AUTO
BG
TO START
TO SET
V-UHF 34
1
OK MENU
10
200
199
100
1. Press the MENU button.
2.
3.
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
AUTO PROGRAMME
Auto programme
5.
6.
b. Press the TUNE/* key on remote for direct tuning.
or OK
PROGRAMME EDIT
BG
4. Press button to select AUTO PROGRAMME.
TO START
OK MENU
Manual search
search
5. Press button to select COLOR SYSTEM. Press button to
select the AUTO, PAL.
Press OK button.
STORAGE FROM.
SOUND SYSTEM.
11
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
1
10.
11.
1.
2.
Press the menu button, then press button to select the
Press button to select FINE.
Press the button step by step to fine tune for the best
picture and sound.
3.
Press the OK button to store Fine Tuned channel.
4.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
5.
5.
Fine Tuning
Channel Selection (option)
1. Press the MENU button, press button and press button to select
CHANNEL on PROGRAMME menu
2. Press button to select V-UHF or CABLE on the CHANNEL menu.
3. Press number key to select the channel number directly.
4. Press the OK button to store it, the display STORED will appear.
MANUAL SEARCH
STORED
MANUAL SEARCH.
Press button to select the BG, I, DK, M.
BG : (Asia/New Zealand/M.East/Africa/Australia)
I : (Hong Kong/South Africa)
D : ( East Europe/China/ Africa/CIS)
M : ( USA / Korea/Philippines) (option)
Press OK button.
PROGRAMME menu.
COLOUR SYSTEM
SOUND SYSTEM
PROGRAMME EDIT
CHANNEL
STORAGE FROM
PROGRAMME
AUTO
BG
TO START
TO SET
V-UHF 34
1
OK MENU
FINE
AUTO PROGRAMME
MANUAL SEARCH
COLOUR SYSTEM
SOUND SYSTEM
AUTO PROGRAMME
MANUAL SEARCH
PROGRAMME EDIT
CHANNEL
STORAGE FROM
PROGRAMME
AUTO
BG
TO START
TO SET
V-UHF 34
1
OK MENU
FINE
Normally Fine Tuning is necessary only if reception is poor.
COLOUR SYSTEM
SOUND SYSTEM
AUTO PROGRAMME
MANUAL SEARCH
PROGRAMME EDIT
STORAGE FROM
PROGRAMME
AUTO
BG
TO START
TO SET
1
FINE
CHANNEL
OK MENU
V-UHF 34
0-9
PROGRAMME MENU.
Skipping a programme
1. Select a programme number to be skipped with the or
button.
2. Press the BLUE button. The skipped programme turns
to blue.
3. Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that
you will be unable to select it using the button during normal
TV viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or select it
in the PROGRAMME EDIT or LIST menu. Skipped prog. No.
appears BLUE.
4. Skipped programmes can be selected in X-SORT LIST.
Repeatedly press the MENU button to return to normal TV viewing.
COLOUR SYSTEM
SOUND SYSTEM
AUTO PROGRAMME
MANUAL SEARCH
PROGRAMME EDIT
CHANNEL
STORAGE FROM
FINE
PROGRAMME
AUTO
BG
TO START
TO SET
V-UHF 34
1
OK MENU
12
Programme edit
This function enables you to delete or skip or copy or move the stored
programmes. Also you can move some stations to other programme
numbers.
1. Press the MENU button, Press the button and then button
to select the PROGRAMME EDIT menu.
2. Press button to go in PROGRAMME EDIT mode.
Deleting a programme
1. Select a programme to be deleted with the or button.
2. Press the RED button twice.
The selected programme is deleted, all the following programmes
are shifted up one position.
Copying a programme
1 . Select a programme to be copied with the or button.
2. Press the GREEN button.
The selected programme is copied, all the following programmes
are shifted down one position.
Moving a programme
1. Select a programme to be moved with the or button.
2. Press the YELLOW button.
3. Move the programme to the desired programme number with the
or button.
4. Press the YELLOW button again to release this function.
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
COPY
DELETE
MOVE
SKIP
PROGRAMME EDIT
PROGRAMME EDIT
MOVE OFF
PICTURE
PSM
XDP DEMO
CSM
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
STANDARD
STANDARD
TO START
80
55
55
60
OK MENU
TO START
80
55
55
60
MENU
PICTURE
PSM
XDP DEMO
CSM
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
STANDARD
PICTURE
PSM
XDP DEMO
CSM
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
STANDARD
STANDARD
TO START
80
55
55
60
OK MENU
1. Press the MENU button and then button to select the
PICTURE MENU.
2. Press button to select PSM, press to select the desired
PSM (STANDARD, DYNAMIC, MILD, GAME, or USER).
13
Picture adjustment
You can adjust picture contrast, brightness, colour, sharpness and Tint
(NTSC input only) to the levels you prefer.
1. Press the MENU button and then button to select the PICTURE
menu.
2. Press the button and then button to select CONTRAST,
BRIGHTNESS, COLOUR, SHARPNESS or TINT.
3. Press the button to make appropriate adjustments on each
sub menu.
You can also select User or standard PSM setting by directly
pressing PSM button.
4. Press the OK button to store it for the picture User.
5. Repeatedly press the MENU button to return to normal TV
viewing.
CONTRAST
PSM (Picture Status Memory)
Note: PSM status change to user automatically when contrast,
brightness, colour and sharpness set manually.
CSM (Colour Status Memory)
XDP Demo (option)
1. Press the MENU button and to select the PICTURE menu.
2. Press the to select XDP DEMO.
3. Screen splits for Demo.
4. Press any button for XDP Demo exit.
1. Press MENU button and then button to select the PICTURE
menu.
2. Press button and button to select CSM, press to
button select the desired CSM (STANDARD, REDDISH,
GREENISH or BLUISH) .
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
STANDARD
14
Picture format (ARC) (option)
You can watch TV in various picture formats; NORMAL, ZOOM.
Repeatedly press the ARC button to select your desired picture
format.
Normal (4:3)
This picture format is 4 : 3 of general TV.
Zoom (14:9)
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower sides so that the screen
16:9 is full. The bottom and top of the picture may be lost.
Note :
a. When you switch the set to Off, the ZOOM picture format is reset
to the NORMAL (4:3).
b. This menu will appear only in English.
Excellent digital picture selection
When this function is On, picture quality will be enhanced. Repeatedly
press the XDP button to switch On or Off.
Note : If you press the PSM or EYE/* button with the XDP function, the
excellent digital picture function is automatically switched Off.
When PSM, XDP
keys pressed or any of the picture settings are changed.
Off.
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
(XDP On)(XDP Off)
XDP ONXDP OFF
SSM
XDS
AVL
BALANCE
EQUALIZER
FLAT
OFF
OFF
0
SOUND
OK MENU
TO SET
Sound adjustment
You can select your preferred sound setting: Flat, Music, Movie,
Speech, User and you can also adjust the sound frequency of
equalizer and balance.
If you switch AVL (option) to On, the set automatically keeps on an
volume level even if you change programmes.
equal
1. Press the MENU button and then button to select the
SOUND menu.
2. Press the button and then button to select the desired
sound item; SSM, AVL, BALANCE, XDS, EQUALIZER.
3. Press the button to select SSM.
Press to select MUSIC, MOVIE, SPEECH, USER or FLAT.
To recall your preferred setting press the SSM/* button until the
desired sound (FLAT, MUSIC, MOVIE, SPEECH or USER)
appears. The sound FLAT, MUSIC, MOVIE, and SPEECH are
programmed for good sound reproduction at the factory and cannot
be changed.
Notes :
AVL option will not be available in some models.
15
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
OK MENU
Equalizer
1. Select SOUND menu.
2. Press and button to select EQUALIZER.
3. Press buttton and Select a sound band by pressing the
button.
4. Frequency level change with button.
5. Press th OK button to store it for the sound user.
Note:
If any frequency of equalizer is adjusted then SSM mode automatically
changes to USER.
SSM
XDS
AVL
BALANCE
EQUALIZER
FLAT
OFF
OFF
0
SOUND
OK MENU
TO SET
When this function is On, it will give surround effect as well as loudness
will be increased.
Repeatedly press the XDS button to switch On or Off.
XDS selection (option)
16
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
Balance adjustment
You can adjust balance.
1. Press the MENU button and select the SOUND menu.
2. Press the button and then button to select BALANCE menu.
3. Make desired adjustment with the on the Balance
4. Repeatedly press the MENU button to return to normal TV
viewing.
AVL (Auto Volume Leveler) (option)
If you select AVL On, the set automatically keeps on an equal volume
level even if you change programmes.
1. Press the MENU button and then button to select the SOUND
menu.
2. Press the button and then button to select AVL.
3. Press the button to select On or Off on the AVL menu.
4. Repeatedly Press the MENU button to return to normal TV viewing.
1.0 10
KHz
O.1
(XDS On)(XDS Off)
XDS ONXDS OFF
17
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
(option)
(option)
(option)
(for AV2)
Note: Sound output selection is not applicable for AV1 &
COMPONENT mode.
Y
(option)
ON TIME VOLUME
AUTO SLEEP
OFF
30
00
00
OK MENU
TIME
OFF TIME
ON TIME
CLOCK
TIME
OFF TIME
ON TIME
ON TIME VOLUME
AUTO SLEEP
OFF
30
OK MENU
CLOCK
TIME
CLOCK
OFF TIME
ON TIME
ON TIME VOLUME
AUTO SLEEP
OFF
30
OK MENU
18
On
Off
On/Off
On/Off
Off
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
Press and then button to enable OFF/ON TIME.
7. Press button to adjust volume level.
6. Press button to select ON TIME VOLUME.
8
00
00
00
00
CLOCK.
CLOCK
AUTO SLEEP
AUTO SLEEP.
AUTO SLEEP
ON
OFF
ON
OFF
TIME/ON TIME.
TIME
TIME menu.
ON TIME
TIME
TIME MENU.
SPECIAL
LANGUAGE
INPUT
CHILD LOCK
DEGAUSS
BLUE BACK
SIGNAL
ENGLISH
TV
OFF
OFF
ON
ON
OK MENU
19
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
SPECIAL
LANGUAGE
CHILD LOCK
DEGAUSS
BLUE BACK
SIGNAL
ENGLISH
OFF
OFF
ON
ON
MENU
INPUT
TV
S-VIDEO: DVD players/Laptop output connected to S-VIDEO
socket (option).
b. In AV mode, BLUEBACK, SIGNAL will not work.
a.
Child lock On,
(Option).
CHILD LOCK.
ON
OFF
CHILD LOCK
CHILD LOCK ON
S-VIDEO
SPECIAL
SPECIAL
Language: Ref: page No. 8
Inputs can be set for TV or AV mode. AV mode is used when a
VCR/DVD, or other equipment is connected to the set.
,
SPECIAL
LANGUAGE
INPUT
CHILD LOCK
DEGAUSS
BLUE BACK
SIGNAL
ENGLISH
TV
OFF
OFF
ON
ON
OK MENU
20
VOL
PR
MENU
POWER
MUTE
MUSIC
EQ*
MOVIES
MMWOOFER*
DRAMA
ARC
TV/AV
NEWS
I/II*
SLEEP
XDS/*
Q-VIEWTUNE/*
FAV/X-SORT*
PSM
XDP
SSM/*
LIST/X-LIST*
EYE/*
1 2
3
4
5
6
7
8
9
0
PR
VOL
OK
Signal (option)
SIGNAL.
SIGNAL
It displays the RF signal strength.
BLUE BACK.
DEGAUSS.
sub
Signal Level Description
To see signal level on top right corner press OK button from remote.
Signal to noise ratio will be displayed in form of red, yellow and green
bars. Details are as follows:-
1. Two red bars - weak signal. (More Noise)
2. Two red+ two yellow bars - Normal signal. (Normal Noise)
3. Two red+ two yellow + two Green bars - perfect signal. (No Noise)
4. No signal - Without any bar. (Very Noisy signal)
C 02 1
Red Yellow Green
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
