5 DRIVER’S SEAT, INSTRUMENTS AND CONTROLS
AUTOMATIC ILLUMINATION OF HeAdLAMPS (ON VTR + & eXCLUSIVe MOdeLS)
- Once ‘AUTO’ has been activated, the headlamps will illuminate either when the light levels are low or
if the wipers are activated.
- Please note they do not necessarily respond to foggy conditions. In these types of conditions they
must be switched on manually and may also require the fog lamps.
(For more details please refer to pages 83 & 88 of the owner’s handbook).
‘GUIde Me HOMe’ LIGHTING
- Designed to improve the visibility whilst walking away from the vehicle, by keeping the headlamps on
temporarily after switching off the ignition.
- Automatic activation can be set for 15, 30 or 60 seconds through the onboard computer menu on
cars with ‘Automatic headlamps’ or manually for 30 seconds for those without, by pulling the lighting
stalk towards the steering wheel within 2 minutes after switching off the engine.
(For more details please refer to page 85 of the owner’s handbook).
AUTOMATIC RAIN SeNSITIVe WINdSCReeN WIPeRS (VTR + & eXCLUSIVe)
- To activate this function push down on the windscreen wiper stalk.
(For more details please refer to pages 89 - 91 of the owner’s handbook).
WINdSCReeN WIPeRS ‘MAINTeNANCe POSITION’
- For up to one minute after switching off the ignition, press the windscreen wiper stalk down and the
wipers will move to a vertical position.
- This allows for the screen/wiper blades to be cleaned, changed or positioned for winter parking
without risking damage to the bonnet. Winter parking is leaving the wiper blades off the screen
overnight reducing the risk of frost damage to the blades.
(For more details please refer to page 91 of the owner’s handbook).