SAVOGRAN 01282 User guide

Brand
SAVOGRAN
Model
01282
Type
User guide
Deglosser DCM Free Prepares Painted Surfaces for painting
Formulated without Methylene Chloride and NMP
Multi-purpose solvent VOC compliant
Etches previously painted surfaces for better paint adhesion
Saves time by eliminating sanding between coats
Cleans surfaces after paint removal
Reformulated
for the Future
SAVOGRAN
Prod Code: Size: Pkd: UPC: Ship Wt:
01282 Quart 6/case 0 49542 01282 9 14 lbs.
Description
Cleans oil, grease paint remover sludge from wood and metal, and heel marks,
dirt and pencil marks from unfinished wood. Improves bonding of new paint,
varnish and lacquer to hold finishes.
Directions
BEFORE USE, read all information on container. We recommended the use of
rubber gloves and safety glasses.
•
Apply Deglosser evenly and liberally with clean cloth over an area of 3
or 4 sq. ft. at a time. Change wiping surface of cloth and/or change cloth
often and as necessary to remove and avoid redepositing loosened and
dissolved grime.
•
Rinse with fresh water then wipe dry with a clean cloth. Carefully examine
cleaned surfaces. Some old gloss and semi-gloss finishes resist delgossing.
If surface remains glossy then repeat step #1 with a nylon scrubbing pad.
The surface should look dull after surface has dried.
Important label information
WARNING: HARMFUL IF SWALLOWED. SKIN AND EYE IRRITANT. MAY CAUSE BURNS.
Before use, always read all information and warnings on container. Safety data
sheet available upon request.
The Savogran Company P.O. Box 130, Norwood, MA 02062 1-800-225-9872
Email: inf[email protected] www.savogran.com
Deglosser DCM Free Prepares Painted Surfaces for painting
  • Page 1 1
  • Page 2 2

SAVOGRAN 01282 User guide

Brand
SAVOGRAN
Model
01282
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents