2. Toro
  3. Bucket Mount Kit, Z Master 3000, 5000, or 6000 Series Riding Mower

Toro Bucket Mount Kit, Z Master 3000, 5000, or 6000 Series Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Bucket Mount Kit, Z Master 3000, 5000, or 6000 Series Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3422-362RevA
BucketMountKit
ZMaster
®
3000,5000,or6000SeriesRidingMower
ModelNo.137-9216
InstallationInstructions
Safety
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea
ofpotentialdanger.Replaceanydecalthatisdamagedormissing.
decal137-9231
137-9231
1.Maximumweight7kg(15lb)
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Bucket-holdermount1
Bracket-supporthinge1
Mountstrap—for48,52,and60-inchdecks
1
Mountstrap—for72-inchdecks
1
Topbracket1
Knob1
Carriagebolt(5/16x7/8inch)
4
Flangenut(5/16inch)
3
Flange-headbolt(3/8x1inch)
1
Locknut(3/8inch)
1
Installthekit.
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3422-362*A
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Movethemotion-controlleverstotheNEUTRAL-LOCKposition.
3.Engagetheparkingbrake.
4.Shutofftheengineandremovethekey.
g037289
Figure1
InstallingtheKit
1.Installthebucket-holdermountintothe
deck-mountingholebythedischargeplate
(Figure2).
g253477
Figure2
1.Bucket-holdermount2.Mountinghole
2
2.Securethebracket-supporthingeandmount
straptothebucket-holdermountusing3
carriagebolts(5/16x7/8inch)and3angenuts
(5/16inch)asshowninFigure3.
RefertoFigure4forthepropermountstrap.
Usethemountstrapwiththe51mm(2inches)
bendoffsetand4holesfor48,52,and60-inch
decks.Usethemountstrapwiththe13mm(1/2
inch)bendoffsetand3holesfor72-inchdecks.
g253479
Figure3
1.Mountstrap4.Bracket-supporthinge
2.Flangenut(5/16inch)5.Carriagebolt(5/16x7/8
inch)
3.Bucket-holdermount
g254249
Figure4
1.Mountstrapfor48,52,
and60-inchdecks
2.Mountstrapfor72-inch
decks
3.Securethemountstraptothemowerdeckusing
theange-headbolt(3/8x1inch)andlocknut
(3/8inch)asshowninFigure5.
g253480
Figure5
1.Locknut(3/8inch)3.Flange-headbolt(3/8x1
inch)
2.Mountstrap
4.Securethetopbrackettothebucket-holder
mountusingtheknobandacarriagebolt(5/16x
7/8inch)asshowninFigure6.
g253478
Figure6
1.Knob
3.Carriagebolt(5/16x7/8
inch)
2.Topbracket
3
Operation
MountingaBucket
UseonlyToro-approvedattachmentsandaccessories.
Themaximumcapacityis7kg(15lb).
1.Loosentheknobandraisethetopbracket.
Tightentheknobtoholditinplace(Figure7).
2.Placethebottomlipofthebucketoverthe
bottomledgeoftheweldedsupportbracket
(Figure7).
3.Loosentheknobandlowerthetopbracketasfar
aspossibleovertherimofthebucket.Tighten
theknob(Figure7).
g253491
Figure7
1.Topbracketovertherimof
thebucket
3.Bottomledgeofthe
supportbracket
2.Knob
4
/