FormNo.3386-109RevA
TractionCableKit
201330inTurfMasterWalk-BehindLawnMower
ModelNo.131-0866
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
1.Removetheoldself-propelcableanddiscardit.
2.Tipthemachineontoitsrightside(airlterup).
3.Locatethebottomendoftherearrivetthatholds
themodelandserialnumberplateontothehousing
(Figure1).
Figure1
1.Rearrivetend
2.Drilla16mm(5/8inch)
diameterholehere.
4.Markaspot25mm(1inch)directlybelowtherivet
end(Figure1).
5.Drillanddeburra16mm(5/8inch)diameterholein
themowerhousingfrombelowatthespotthatyou
markedinstep4.
Note:Theoillterislocateddirectlyabovethespot
whereyouaredrilling.Markthedrillbitwithtape6
mm(1/4inch)belowthetipofthedrillbittoindicate
atwhatdepthyouaretostopdrilling.
6.Insertthenewcablefromthetop(springendrst)
throughthedrilledhole.
7.Attachthecablespringendontothetransmission
activationleverasshowninFigure2.
Figure2
1.Transmissiongearcase3.Transmissionactivation
lever
2.Cablespringend
8.Insertthecableanchorintotheholeinthebracketon
thetransmissiongearcaseasshowninFigure3.
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3386-109*A